Simrad E0102 Handleiding

Bekijk gratis de handleiding van Simrad E0102 (3 pagina’s), behorend tot de categorie Monitor. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.6 sterren uit 7 reviews. Heb je een vraag over Simrad E0102 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Instructions

E0102 Alarm Panel

GENERAL

The E0102 Alarm Panel is designed for use with the E5024 ECDIS system, and the MARIS

ECDIS900 MK5 PC and Simrad M5024 monitor. The unit gives an audible and a visual alarm for

any ECDIS system, including power supply failure.

This type of alarm is mandatory on systems requiring Wheelmark certification.

Pushing the button will mute the audible alarm. The visual alarm will remain lit as long as the

alarm situation remains. The indication will cease if the alarm is cancelled on the ECDIS

system.

INSTALLATION

The panelE0102 is mounted and fixed from front by the four enclosed screws.

Select a mounting location where a visual alarm on the panel not will disturb the operator’s

night vision!

Cable(s) should be fixeto spacers for the circuit board.d with the enclosed cable strap

WIRING THE E5000 PROCESSOR

Connect the Alarm Panel according to E0102 the illustration below.

Note that the power supply for E0102 must be independent of the power supply to the E5000

Processor.

*98810826002*--

Product specificaties