Silva S15-N Navtex Handleiding

Bekijk gratis de handleiding van Silva S15-N Navtex (10 pagina’s), behorend tot de categorie Marine. Deze gids werd als nuttig beoordeeld door 89 mensen en kreeg gemiddeld 4.8 sterren uit 7 reviews. Heb je een vraag over Silva S15-N Navtex of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Operation Manual S15-N

Page 1

SILVA S15-N DUAL CHANNEL (518K AND 490KHz)

NAVTEX RECEIVER OPERATION MANUAL

Thank you for choosing SILVA S15-N NAVTEX receiver. The NAVTEX

receiver is used for receiving meteorological or navigational information

via a simple connection to any personal computer (PC) or a SILVA S15

VHF transceiver.

INTRODUCTION

The SILVA NAVTEX receiver is a complete NAVTEX receiver/decoder

unit, contained within a waterproof antenna unit. This unit outputs data in

RS232 format. This can output its data for display on the SILVA S15 VHF

radio in its ’NAVTEX mode’ OR on a PC running the SILVA custom

software supplied. Alternatively it may be used by using the Hyperlink or

Terminal software supplied with Windows as standard*. It may also be

used by third party software such as Tsunamis etc who ask for and utilise

a NAVTEX input.

*The Terminal software utility supplied with Windows 3.1 and

Windows3.11, or the HyperTerminal utility supplied with Windows 95、

98、 2000 and Windows XP.

INSTALLATION

Mount the NAVTEX antenna unit onto any standard VHF antenna base

(a choice is available allowing rail mounting/bracket mounting or

mounting on any flat surface – see your dealer for details). Site the

antenna in a clear position well clear of any sources of RF interference

(this includes the PC or S15 that it is connected to and any GPS/Radar

antennas). A typical installation on a yacht may be on the pushpit, on a

power boat on top of the wheelhouse or on the radar arch (either above

or below the scanner). The Antenna is supplied with 10 metres of

interconnecting cable.

If you are connecting to a SILVA S15 radio, simply connect the antenna

cable (5 pin mini DIN plug) into the 490/518Khz switchable adaptor

Product specificaties