Silicon Power Ace A55 Handleiding

Silicon Power Solid state drives (ssd) Ace A55

Lees hieronder de 📖 handleiding in het Nederlandse voor Silicon Power Ace A55 (13 pagina's) in de categorie Solid state drives (ssd). Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13

SSD Firmware Update Software

Supported Operating Systems

Supported on 32 and 64-bit. XP SP3 Vista SP2 Win 7/8/8.1/10、、

Note:

1. Microsoft AHCI driver is required and Microsoft AHCI mode must be enabled on your computer.

2. You must have Administrator privileges on your computer to run this utility.

3. If update failed, please help try to demount the IRST mode.

Before Use

1. Updating your device may result in data loss. Therefore, we strongly recommend you back up your

data before proceeding.

2. Please DO NOT unplug the device or the power source during firmware update. This may cause

unpredictable damage.

3. Use only native SATA ports to perform upgrade. Do NOT use third party controllers.

Getting Started

1. Connect the Silicon-Power SSD to your PC or laptop . (To be used SATA interface directly. Do not used

USB HUB)

2. Unzip the

SSD Update Tool.rar

file that is downloaded from SP website.

3. Double click icon and open “SSD firmware update software”.

4. SSD firmware update software will automatically scan and pop up all drives as below:

Please select the drive that you want to update the firmware.

5. After drive selection, the SSD firmware update software will automatically download the

corresponding firmware update program.

6. Pop up corresponding firmware update program after download finished.

If pop up , please go to step 6.

If pop up , please go to step 13.

If pop up , please go to step 16.

Product specificaties

Merk:	Silicon Power
Categorie:	Solid state drives (ssd)
Model:	Ace A55
Kleur van het product:	Zwart
Breedte:	100 mm
Diepte:	69.85 mm
Hoogte:	7 mm
Interface:	SATA III
Veiligheidsfunties:	Shock resistant, Vibration proof
SSD capaciteit:	128 GB
ECC:	Ja
SSD-vormfactor:	2.5"
Mean time between failures (MTBF):	1500000 uur
Type geheugen:	SLC
RAID support:	Ja
Schrijfsnelheid:	- MB/s
Component voor:	Notebook
Overdrachtssnelheid:	6 Gbit/s
Code geharmoniseerd systeem (HS):	84717070
S.M.A.R.T. support:	Ja
TRIM support:	Ja
NCQ (Native command queuing):	Ja
NAND-flashtype:	SLC (Single Level Cell)
Sequentiële leessnelheid (ATTO):	550 MB/s
Sequentiële schrijfsnelheid (ATTO):	420 MB/s
Sequentiële leessnelheid (CDM):	460 MB/s
Sequentiële schrijfsnelheid (CDM):	370 MB/s