SIIG CE-H22911-S1 Handleiding

SIIG AV extender CE-H22911-S1

Lees hieronder de 📖 handleiding in het Nederlandse voor SIIG CE-H22911-S1 (8 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
1
Introduction
The HDMI Over Gigabit IP Extender Kit with IR extends
HDMI signal over one Cat5/6 cable up to 330ft.
Features and Benefits
• Extend HDMI signals up to 100m over Cat5e/6
cabling
• Supports video high resolution Full HD 1080p, 1920
x 1080
• IR (Infrared Remote) pass-through enabled
• High Definition Audio (HD) Surround Sound
• Metal housing with mounting mechanism
Package Contents
CE-H22811-S1
04-0958A
HDMI Over Gigabit IP
Extender Kit with IR
Installation Guide
2
Layout
Transmitter Unit (Tx)
Figure 1: Transmitter side panel
•DC 5V: DC 5V power jack. Plug the included power
adapter here
•PWR: LED indicator for power status. On/Off when
the Transmitter is powered on/off
•LINK: LED indicator for link status. On when the
connection between the Transmitter and Receiver is
established
CE-H22911-S1
3
•HDMI IN: HDMI signal input port. Connect this
port to your HDMI source device by using an HDMI
cable (not included)
•LINE: Signal output port, connected with Receiver's
LINE port by using a CAT X cable (not included)
•IR: Connect to the included IR blaster cable
Receiver/Repeater Unit (Rx)
Figure 2: Receiver/Repeater side panel
•DC 5V: DC 5V power jack. Plug the included power
adapter here
•IR: Connect to the included IR receiver cable
•PWR: LED indicator for power status. On/Off when
the Receiver/Repeater is powered on/off
•LINK: LED indicator for link status. On when the
connection between Transmitter and Receiver is
established
•HDMI OUT: HDMI signal output port. Connect
this port to the remote HDMI display by using an
HDMI cable (not included)
•LINE: Signal input port, connected with Transmitter's
LINE port by using a CAT X cable (not included)


Product specificaties

Merk: SIIG
Categorie: AV extender
Model: CE-H22911-S1
Kleur van het product: Zwart
Soort: AV-receiver
LED-indicatoren: Ja
Stroom: 2 A
Ondersteunde video-modi: 1080i, 1080p, 480p, 720p
Maximum resolutie: 1920 x 1080 Pixels
Meegeleverde kabels: RS-232
Snelstartgids: Ja
Inclusief AC-adapter: Ja
Certificering: FCC, CE
Aansluiting voor netstroomadapter: Ja
Materiaal: Metaal
Duurzaamheidscertificaten: RoHS
Temperatuur bij opslag: -20 - 60 °C
Compatibele producten: Siig CE-DP0511-S1 / CE-DP0711-S1 / CE-H22611-S1 / CE-H22811-S1 / CE-DP0611-S1 / CE-DP0811-S1 / CE-H22711-S1
RS-232 ingangspoorten: 1
Aantal HDMI-uitgangen: 1
Receiver afmetingen (B x D x H): 115 x 28 x 90.93 mm
RJ-45 invoer ports: 1
Operating voltage: 5 V
Maximaal bereik: 100 m
Wifi: Nee
AC-ingangsspanning: 100-240 V
AC-ingangsfrequentie: 50 - 60 Hz
Bedrijfstemperatuur (T-T): 0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 80 procent
Receiver gewicht: 350 g
Ondersteundende kabel types: Cat5e, Cat6

Heb je hulp nodig?

Als je hulp nodig hebt met SIIG CE-H22911-S1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding AV extender SIIG

Handleiding AV extender

Nieuwste handleidingen voor AV extender