Sigma BC 12.0 WL Handleiding

Sigma Sporthorloge BC 12.0 WL

Lees hieronder de 📖 handleiding in het Nederlandse voor Sigma BC 12.0 WL (2 pagina's) in de categorie Sporthorloge. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
INSTALLATION WIRED SPEED SENSOR
INSTALLATION TECHNICAL DATA LEGAL STATEMENTS
BC 12.0 BC 12.0 WL BC 12.0 WL
FIRST START
CONTENTS
INSTALLATION MOUNT
INSTALLATION WIRELESS SPEED TRANSMITTER
INSTALLATION WIRELESS CADENCE TRANSMITTER
1
2
Emission frequency: 112 kHz, Max power < 11.37 dBm
Emission frequency: 112 kHz, Max power < 11.37 dBm
EU-DECLARATION OF CONFORMITY
We, SIGMA-ELEKTRO GmbH, Dr.-Julius-Leber-Str. 15,
D-67433 Neustadt/Weinstraße declare under our responsibility
that the product BC 12.0 WR are compliant with the essential
requirements of the EMC Directive 2014/30/EU and the RoHS
Directive 2011/65/EU. The declaration of conformity can be
found at: ce.sigmasport.com/bc120wr
We, SIGMA-ELEKTRO GmbH, Dr.-Julius-Leber-Str. 15,
D-67433 Neustadt/Weinstraße declare under our responsibility
that the product BC 12.0 WL and the transmitters STS-S-3 and
STS-C-3 are compliant with the essential requirements and
other relevant requirements of the RED Directive 2014/53/EU
and the RoHS Directive 2011/65/EU. The declaration of
conformity can be found at: ce.sigmasport.com/bc120wl
EU-KONFORMITÄTSERKLÄRUNG
Wir, SIGMA-ELEKTRO GmbH, Dr.-Julius-Leber-Str. 15,
D-67433 Neustadt/Weinstraße, erklären, dass der Fahrrad-
computer BC 12.0 WR bei bestimmungsgemäßer Verwendung
den grundlegenden Anforderungen gemäß der EMC Directive
2014/30/EU und der RoHS Directive 2011/65/EU entspricht.
Sie  nden die Konformitäts-Erklärung unter folgendem Link:
ce.sigmasport.com/bc120wr
Wir, SIGMA-ELEKTRO GmbH, Dr. Julius Leber Str. 15,
D-67433 Neustadt/Weinstraße erklären, dass der Fahrrad-
computer mit Funkübertragung BC 12.0 WL und die Sender
STS-S-3 und STS-C-3 bei bestimmungsgemäßer Verwendung
den grundlegenden Anforderungen gemäß RED Directive
2014/53/EU und der RoHS Directive 2011/65/EU entsprechen.
Sie  nden die Konformitäts-Erklärung unter folgendem Link:
ce.sigmasport.com/bc120wl
FEDERAL COMMUNICATION COMMISSION
INTERFERENCE STATEMENT
Caution: If any changes or modi cations not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
The grantee is not responsible for any changes or
modi cations not expressly approved by the party
responsible for compliance. Such modi cations could
void the user’s authority to operate the equipment.
The RF Exposure Compliance distance is 5 millimeters.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
FCC ID STS-S-3: M5LSPD3STS
FCC ID STS-C-3: M5LCAD3STS
INDUSTRY CANADA STATEMENT
This device complies with Innovation, Science and Economic
Development Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)
Le présent appareil est conforme aux CNR Innovation,
Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) il ne doit pas produire de brouillage et
(2) l’ utilisateur du dispositif doit étre prêt à accepter tout
brouillage radioélectrique reçu, même si ce brouillage est
susceptible de compromettre le fomctionnement du dispositif.
CAN ICES-3(B)/NMB-3(B)
The device meets the exemption from the routine evaluation
limits in section 2.5 of RSS 102 and compliance with RSS-102
RF exposure, users can obtain Canadian information on RF
exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes
d’évaluation dans la section 2.5 de RSS 102 et la conformité
à l’exposition de RSS-102 rf, utilisateurs peut obtenir
l’information canadienne sur l’exposition et la conformité de rf.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. This
equipment should be installed and operated with a minimum
distance of 5 millimeters between the radiator and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant
en même temps qu’aucune autre antenne ou émetteur. Cet
équipement devrait être installé et actionné avec une distance
minimum de 5 millimètres entre le radiateur et votre corps.
CE INFORMATION
EN
You can  nd the CE declaration at:
ce.sigmasport.com/bc120wr
ce.sigmasport.com/bc120wl
DE
Sie nden die Konformitäts-Erklärung unter
folgendem Link:
ce.sigmasport.com/bc120wr
ce.sigmasport.com/bc120wl
FR
Vous trouverez la déclaration CE à l’adresse :
ce.sigmasport.com/bc120wr
ce.sigmasport.com/bc120wl
IT
La dichiarazione CE è disponibile all‘indirizzo:
ce.sigmasport.com/bc120wr
ce.sigmasport.com/bc120wl
ES
Puede encontrar la declaracn de conformidad CE en:
ce.sigmasport.com/bc120wr
ce.sigmasport.com/bc120wl
PT
Pode encontrar a declaração CE em:
ce.sigmasport.com/bc120wr
ce.sigmasport.com/bc120wl
NL
U kunt de CE-certi cering vinden op:
ce.sigmasport.com/bc120wr
ce.sigmasport.com/bc120wl
PL
Deklaracja CE znajduje się na stronie:
ce.sigmasport.com/bc120wr
ce.sigmasport.com/bc120wl
CZ
ES prohlášení najdete na adrese:
ce.sigmasport.com/bc120wr
ce.sigmasport.com/bc120wl
SP 1
CLICK!
1
Cable mount
Art.-Nr. 00531
2
Magnet
Art.-Nr. 00537
3
Cable ties
6
Power Magnet
Art.-Nr. 00538
5
Mount
Art.-Nr. 00535
4
Speed transmitter
Art.-Nr. 00541
8
Cadence magnet
Art.-Nr. 00539
7
Cadence transmitter
Art.-Nr. 00542
1
+
2
+
3
SPEED
CADENCE
3
+
4
+
5
+
6 3
+
4
+
5
+
6
+
7
+
8
or
or
max
90 cm
35"
max
90 cm
35"
max
90 cm
35"
STEM
6 mm
(0,24 inch)
8 mm
(0,3 inch)
Max. 10 mm
(0,4 inch)
or
UKCA STATEMENT
Wireless Model
We, SIGMA-ELEKTRO GmbH, declare that the equipment above
has been tested in our facility and found compliance with the
requirement limits of applicable standards, in accordance with
the Radio Equipment Regulations 2017 and the Restriction
of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012. The test record, data
evaluation and Equipment Under Test (EUT) con gurations
represented herein are true and accurate under the standards
herein speci ed.
Wired Model
We, SIGMA-ELEKTRO GmbH, declare that the equipment above
has been tested in our facility and found compliance with the
requirement limits of applicable standards, in accordance
with the Electromagnetic Compatibility Regulations 2016 and
the Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012. The
test record, data evaluation and Equipment Under Test (EUT)
con gurations represented herein are true and accurate under
the standards herein speci ed.
optional
Max. 5 mm
(0,2 inch)
www.sigmasport.com
Press 5 sec.
BC 12.0 WR
BC 12.0 WL
INSTRUCTION MANUAL
BC 12.0 wired BC 12.0 wireless BC 12.0 WL CAD
Spoke/
Speiche
WIREDWIRELESSWIRELESS
CADENCE
Transmitter parallel
to wheel /Funk-Sender
parallel zum Rad
Transmitter parallel
to crank arm /
Funk-Sender parallel
zum Pedalarm
EN
Computer WIRED:
Battery type: CR 2450, 3V
Battery life: 3 to 4 years
(When used for 1 hour per day)
Computer WIRELESS:
Battery type: CR 2450, 3V
Battery life: 2 years
(When used for 1 hour per day)
Transmitter:
Battery type: CR 2032, 3V
Battery life: 1.5 years
(When used for 1 hour per day)
DE
Computer KABELGEBUNDEN:
Batterietyp: CR 2450, 3V
Batterielebensdauer: 3 bis 4 Jahre
(Bei einer Benutzung von 1 Stunde pro Tag)
Computer KABELLOS:
Batterietyp: CR 2450, 3V
Batterielebensdauer: 2 Jahre
(Bei einer Benutzung von 1 Stunde pro Tag)
Sender:
Batterietyp: CR 2032, 3V
Batterielebensdauer: 1,5 Jahre
(Bei einer Benutzung von 1 Stunde pro Tag)
FR
Compteur AVEC FIL :
Type de pile : CR 2450, 3V
Autonomie : 3 à 4 ans
(1 heure dutilisation par jour)
Compteur SANS FIL:
Type de pile : CR 2450, 3V
Autonomie : 2 ans
(1 heure dutilisation par jour)
Emetteur :
Type de pile : CR 2032, 3V
Autonomie : 1,5 an
(1 heure dutilisation par jour)
IT
Computer DOTATO DI CAVI:
Tipo di batteria: CR 2450, 3V
Durata della batteria: da 3 e 4 anni
(a fronte di un utilizzo di 1 ora al giorno)
Computer SENZA CAVI:
Tipo di batteria: CR 2450, 3V
Durata della batteria: 2 anni
(a fronte di un utilizzo di 1 ora al giorno)
Sensore:
Tipo di batteria: CR 2032, 3V
Durata della batteria: 1 anno e mezzo
(a fronte di un utilizzo di 1 ora al giorno)
ES
Ordenador CON CABLE:
Tipo de batería: CR 2450, 3V
Duración de la batea: 3 a 4 años
(Con un uso de 1 hora diaria)
Ordenador INALÁMBRICO:
Tipo de batería: CR 2450, 3V
Duración de la batea: 2 años
(Con un uso de 1 hora diaria)
Transmisor:
Tipo de batería: CR 2032, 3V
Duración de la batea: 1,5 año
(Con un uso de 1 hora diaria)
PT
Computador COM FIOS:
Tipo de pilha: CR 2450, 3V
Vida útil da pilha: entre 3 e 4 anos
(numa utilização de 1 hora por dia)
Computador SEM FIOS:
Tipo de pilha: CR 2450, 3V
Vida útil da pilha: 2 anos
(numa utilização de 1 hora por dia)
Transmissor:
Tipo de pilha: CR 2032, 3V
Vida útil da pilha: 1,5 anos
(numa utilização de 1 hora por dia)
NL
Computer MET KABEL:
Batterijtype: CR 2450, 3V
Batterijduur: 3-4 jaar
(Bij gebruik van 1 uur per dag)
Computer ZONDER KABEL:
Batterijtype: CR 2450, 3V
Batterijduur: 2 jaar
(Bij gebruik van 1 uur per dag)
Zender:
Batterijtype: CR 2032, 3V
Batterijduur: 1,5 jaar
(Bij gebruik van 1 uur per dag)
PL
Komputer PRZEWODOWY:
Typ baterii: CR 2450, 3 V
Żywotność baterii: 3 do 4 lat
(przyytkowaniu przez 1 godzinę dziennie)
Komputer BEZPRZEWODOWY:
Typ baterii: CR 2450, 3 V
Żywotność baterii: 2 lat
(przyytkowaniu przez 1 godzinę dziennie)
Nadajnik:
Typ baterii: CR 2032, 3 V
Żywotność baterii: 1,5 roku
(przyytkowaniu przez 1 godzinę dziennie)
CZ
ComputerSKABELOVÝMPŘIPOJENÍM:
Typ baterie: CR 2450, 3V
Životnost baterie: 3až 4roky
(při použíní 1 hodinu denně)
BEZDRÁTOVÝcomputer:
Typ baterie: CR 2450, 3V
Životnost baterie: 2 roky
(při použíní 1 hodinu denně)
Vysílač:
Typ baterie: CR 2032, 3V
Životnost baterie: 1,5 roku
(při použíní 1 hodinu denně)
SIGMA-ELEKTRO GmbH
Dr.-Julius-Leber-Straße 15
67433 Neustadt/Weinstraße, Germany
kundenservice@sigmasport.com
Max. 10 mm
(0,4 inch)
Power Magnet
Battery already installed / Batterie bereits eingebaut /
Pile déjà installée / Batteria già installata /
Batería p1-ya instalada / Bateria já instalada /
Batterij reeds geïnstalleerd / Bateria już zainstalowana /
Baterie je již nainstalována
VIDEOS &
FURTHER
INFORMATION
EXAMPLE OF SETTING PROCEDURE:
1. Open menu: Press and hold A button until the menu opens
2. Toggle to SETTINGS page with the B or the C button
3. Open the SETTINGS menu by pressing the A button
4. Toggle in the SETTINGS menu to the DEVICE settings with the B or the C button
5. Open settings by pressing the A button
6. Toggle to WHEELSIZE 1 setting by pressing the B or the C button
7. Press A button to start adjustment of the WHEELSIZE 1
8. Change value by pressing the B or the C button
9. Conrm adjusted value by pressing A button
Note: Do steps No. 8 and No. 9 until all numbers are adjusted
10a. Go back to former menu level: Toggle to back page by pressing the B or the C button
Conrm with the A button
10b. Close menu: Press and hold the A button (3 sec.)
VOORBEELD VAN INSTELPROCEDURE:
1. Open menu: houd de A-knop ingedrukt totdat het menu opent
2. Wissel maar de INSTELLINGEN pagina met de B of C knop
3. Open het INSTELLINGEN menu door op de A-knop te drukken
4. Wissel in het INSTELLINGEN menu met de B of C knop naar de APPARAAT-instellingen
5. Open instellingen door op de A-knop te drukken
6. Wissel naar WIELMAAT 1 door op de B of C knop te drukken
7. Druk op de A-knop om de WIELMAAT 1 aan te passen
8. Wijzig de waarde door op de B of C knop te drukken
9. Bevestig de ingestelde waarde door op de A-knop te drukken
Opmerking: voer stappen nr. 8 en nr. 9 uit totdat alle waarden zijn aangepast
10a. Ga terug naar het vorige menuniveau: wissel naar pagina terug door op de B of C knop te drukken
Bevestig met de A-knop
10b. Sluit menu: houd de A-knop ingedrukt (3 s)
BEISPIEL EINSTELLVORGANG:
1. Menü öffnen: Die A-Taste gedrückt halten, bis sich das Menü öffnet
2. Mit der Taste B oder C zur Seite EINSTELLUNGEN wechseln
3. Das Menü EINSTELLUNGEN öffnen Sie mit der A-Taste
4.
Innerhalb der EINSTELLUNGEN mit den Tasten
B
oder
C
zum Menüpunkt GERÄTE-Einstellungen wechseln
5. Die Einstellungen öffnen Sie mit der A-Taste
6. Wechseln Sie durch einen Druck auf die Taste B oder C zur Einstellung „WHEELSIZE 1“
7. Drücken Sie die A-Taste, um den Wert für „WHEELSIZE 1“ einzustellen
8. Ändern Sie den Wert, indem Sie die Taste B oder C drücken
9. Den ausgewählten Wert bestätigen Sie durch Drücken der A-Taste
Anmerkung: Wiederholen Sie die Schritte 8 und 9, bis alle Zahlenwerte eingestellt sind
10a. Um zu einem früheren Menülevel zu gelangen, drücken Sie die Taste B oder C
Mit der A-Taste bestätigen
10b. Menü schließen: A-Taste gedrückt halten (3 Sek.)
EJEMPLODECÓMOSEAJUSTA:
1. Abrir el menú: pulsa y mantén pulsado el botón A hasta que dicho menú se abra
2. con el botón PasaalapáginaAJUSTES B o C
3. Abre el menú AJUSTES pulsando el botón A
4. usando el botón EnelmenúAJUSTES,pasaalosajustesdeldispositivo B o C
5. Abre los ajustes pulsando el botón A
6. Pasa al ajuste del TAMAÑO DE RUEDA 1 pulsando el botón B o C
7. Pulsa el botón A para iniciar el ajuste del TAMAÑO DE RUEDA 1
8. Cambia el valor pulsando el botón B o C
9. Conrma la opción ajustada pulsando el botón A
Nota: completa los pasos 8 y 9 hasta que todos los números estén ajustados
10a. Volver al nivel de menú anterior: vuelve a la página anterior pulsando el botón B o C
Conrma usando el botón A
10b. Cerrar menú: presiona y mantén pulsado el botón A (3 seg.)
ESEMPIO DI PROCEDURA DI IMPOSTAZIONE:
1. tenere premuto il pulsante Aprire il menu: A nché non si apre il menu
2. ScorrerenoallapaginaIMPOSTAZIONIcon il pulsante B o C
3. Aprire il menu IMPOSTAZIONI premendo il pulsante A
4. ScorrerenelmenuIMPOSTAZIONInoalleimpostazionidelDISPOSITIVO con il pulsante B o C
5. Aprire le impostazioni premendo il pulsante A
6. Scorrerenoall‘impostazioneCIRCONFERENZARUOTA1 premendo il pulsante B o C
7. Premere il pulsante A per iniziare a regolare la CIRCONFERENZA RUOTA 1
8. Cambiare il valore premendo il pulsante B o C
9. Confermare il valore regolato premendo il pulsante A
Nota: eseguire i passaggi n. 8 e n. 9 nché non sono stati regolati tutti i valori
10a. Tornare al livello di menu precedente: scorrere no all‘ultima pagina premendo il pulsante B o C
Confermare con il pulsante A
10b. Chiudere il menu: tenere premuto il pulsante A (3 sec.)
PRZYKŁADPROCEDURYUSTAWIANIA:
1. Otwórz menu: naciśnij i przytrzymaj przycisk A do momentu otwarcia menu
2. PrzejdźdozakładkiSETTINGS, naciskając przycisk B lub C
3. Otwórz menu SETTINGS, naciskając przycisk A
4. WmenuSETTINGSprzejdźdozakładkiustawieńDEVICE, naciskając przycisk B lub C
5. Otwórz ustawienia, naciskając przycisk A
6. PrzejdźdoustawieniaWHEELSIZE1, naciskając przycisk B lub C
7. Naciśnij przycisk A, aby rozpocząć ustawianie WHEELSIZE 1
8. Zmień wartość, naciskając przycisk B lub C
9. Zatwierdź ustawioną wartość, naciskając przycisk A
Uwaga: powtarzaj krok 8 i 9 do momentu ustawienia wszystkich cyfr
10a.
Przejdź do poprzedniego poziomu menu: przejdź do poprzedniej zakładki, naciskając przycisk
B
lub
C
Zatwierdź, naciskając przycisk A
10b. Zamknij menu: naciśnij i przytrzymaj przycisk A (3 sek.)
EXEMPLEDEPROCÉDUREDERÉGLAGE:
1. appuyer sur le bouton Ouvrirlemenu: A et le maintenir enfoncé jusqu‘à ce que le menu s‘ouvre
2. BasculerverslapagePARAMÈTRES avec le bouton B ou C
3. Ouvrir le menu PARAMÈTRES en appuyant sur le bouton A
4. DanslemenuPARAMÈTRES,basculerverslesparamètresdelAPPAREIL avec le bouton B ou C
5. Ouvrir les paramètres souhaités en appuyant sur le bouton A
6. BasculerversleparamètreTAILLEDEROUE1 en appuyant sur le bouton B ou C
7. Appuyer sur le bouton A pour débuter le réglage de la TAILLE DE ROUE 1
8. Modier la valeur en appuyant sur le bouton B ou C
9. Conrmer la valeur réglée en appuyant sur le bouton A
 Remarque: effectuer les étapes n° 8 et n° 9 jusqu‘à ce que toutes les valeurs soient réglés
10
a.
Revenir au niveau de menu précédent : basculer vers la page précédente en appuyant sur le bouton
B
ou
C
Conrmer avec le bouton A
10b. Fermer le menu: appuyer sur le bouton A et le maintenir enfoncé (3 sec.)
EXEMPLO DE PROCEDIMENTO DE DEFINIÇÃO:
1. Abrir menu: manter premido o botão A até abrir o menu
2. com o botão Comutar para a página DEFINIÇÕES B ou C
3. Abrir o menu DEFINIÇÕES premindo o botão A
4. com o botão ComutarnomenuDEFINIÇÕESparaasdeniçõesdoDISPOSITIVO B ou C
5. Abrir denições premindo o botão A
6. ComutarparaadeniçãoTAMANHODERODA1 premindo o botão B ou C
7. Premir o botão A para iniciar o ajuste do TAMANHO DE RODA 1
8. Alterar valor premindo o botão B ou C
9. Conrmar o valor ajustado premindo o botão A
Nota: execute os passos 8 e 9 até todos os números estarem ajustados
10a. Voltar para o nível de menu anterior: comutar para a página anterior premindo o botão B ou C
Conrmar com o botão A
10b. Fechar menu: manter premido o botão A (3 seg)
PŘÍKLADPOSTUPUNASTAVENÍ:
1. Otevřenímenu: Stiskněte a podržte tlačítko A, dokud se menu neotevře
2. PřepnětenastránkuNASTAVENÍ pomocí tlačítka B nebo C
3. Otevřete menu NASTAVENÍ stisknutím tlačítka A
4. VmenuNASTAVENÍpřepněte pomocí tlačítka B nebo C nanastaveníZAŘÍZENÍ.
5. Otevřete nastavení stisknutím tlačítka A
6. PřepnětenanastaveníVELIKOSTKOLA1 stisknutím tlačítka B nebo C
7. Stisknutím tlačítka A zahájíte nastavení VELIKOSTI KOLA 1
8. Změňte hodnotu stisknutím tlačítka B nebo C
9. Potvrďte nastavenou hodnotu stisknutím tlačítka A
Poznámka: Opakujte kroky 8 a 9, dokud nebudou nastavena všechna čísla
10a. Vraťte se na předchozí úroveň menu: Přepněte na předchozí stránku stisknutím tlačítka B nebo C
Potvrďte tlačítkem A
10b. Zavření menu: Stiskněte a podržte tlačítko A (3 s)
Setting the wheel size:
EXAMPLE
OF A SETTING
1 13 3 3
21 2 2
BATTERY CHANGE
BC 12.0 WR/WL
SETTINGS MENU
1x = WS (mm)
km/h: WS = mm
mph: WS = mm
Note: 1 inch = 25.4 mm
1
6
x
1
.
7
5
x
2
16" 1253 49,3
18" 1411 55,6
20" 1590 62,6
22" 1770 69,7
24" 1907 75,1
26" 2085 82,1
27" 2195 86,4
27.5" 2180 85,8
28" 2200 86,6
29" 2300 90,5
700C 2095 82,5
mm inch
FUNCTIONS / SETTINGS
MENU BASIC BIKE FUNCTIONS DISPLAY OVERVIEW
SPEED TRANSMITTER (BC 12.0 WL) CADENCE TRANSMITTER (BC 12.0 WL)
10
CENT
10
CENT
10
CENT
SPEED SPEED
3 sec. 3 sec.
1x
1x 1x 1x 1x
1x 1x
1x 1x
1x 1x 1x 1x 1x 1x
1x 4x
A A
A
C A A C
A A
C C
CCCCCC
C C
1x A
Backlight ON
Bike 1 or 2
selected
KMH or MPH
selected
Higher/lower
average speed
1
2
3
4
DE
1: Hintergrundbeleuchtung AN;
2: Über/Unter Durchschnittsgeschwindigkeit;
3: Rad 1 oder 2; 4: KMH oder MPH
FR
1: Rétroéclairage MARCHE;
2: Vitesse moyenne plus élevée/plus basse;
3: Vélo 1 ou 2 sélectionné; 4:
KMH ou MPH lection
IT
1
: Sfondo illuminato ON;
2
:
Velocità media maggiore/minore;
3: Bici 1 o 2 selezionata; 4: KMH o MPH selezionati
ES
1
: Retroiluminacn ON;
2
: Velocidad media mayor/menor;
3
: Seleccionada la bici 1 o 2;
4
: Seleccionado Km/h o Mp/h
PT
1: Retroiluminação LIGADA;
2: Velocidade média superior/inferior;
3: Bike 1 or 2; 4: KMH ou MPH selecionado
NL
1
: Achtergrondverlichting AAN;
2
: Hogere/lagere gemiddelde snelheid;
3
: Fiets 1 of 2 geselecteerd;
4
: KMH of MPH geselecteerd
PL
1
: Światło tylne WŁ;
2
: Wyższa/niższa prędkość przeciętna;
3: Wybrano rower 1 lub 2; 4: Wybrano KM/H lub MPH
CZ
1: Zadní světlo ZAP; 2: Vyšší/nižší průměrná rychlost;
3:běr kola 1 nebo 2; 4:běr KM/H neboLE/H
EN
182210 / 1
...
1x
A
SPEED
Battery:
CR 2450
Battery:
CR 2032
Battery:
CR 2032
CAD E NCE
Long press = Menu
Short press = SET/OK
Short press = Toggle left / Value decrease
Short press = Toggle right / Value increase
Long press = Tour data reset
= Backlight on/off
Long press = Select bike 1/2 (BC 12.0 WR)
Sync reset transmitter (BC 12.0 WL)
MENU Button:
LEFT Button:
RIGHT Button:
EN
A: MENÜ-Taste:
Kurz dcken = SET/OK
Lange dcken = Menü
B: LEFT-Taste:
Kurz dcken = Zuck
bttern / Wert verringern
C: RIGHT-Taste:
Kurz dcken = Vorrts
bttern / Wert erhen
Lange dcken =
Tourdaten zurücksetzen
A+B = Hintergrund-
beleuchtung on/off
A+C = Auswahl Fahrrad 1/2
(BC 12.0 WR)
Reset Sensoren
(BC 12.0 WL)
DE
A: Bouton MENU:
Pression longue = Menu
Pression brève = SET/OK
B: BoutonGAUCHE:
Pression brève = Page
pdente/Diminuer la
valeur
C: BoutonDROIT:
Pression bve = Page
suivante/Augmenter valeur
Pression longue = Réinitialiser
données du tour
A+B = Rétroéclairage
marche/arrêt
A+C pression longue =
lection du vélo 1/2
(BC 12.0 WR) Émetteur
de réinitialisation de
synchronisation
(BC 12.0 WL)
FR
A: Pulsante MENU:
Pressione prolungata = Menu
Pressione breve = SET/OK
B: Pulsante SINISTRO:
Pressione breve = Scorrere
a sinistra/diminuire il valore
C: Pulsante DESTRO:
Pressione breve = Scorrere
a destra/aumentare il valore
Pressione prolungata =
Reset dati dell‘escursione
A+B = Sfondo illuminato
on/off
A+C
Pressione prolungata =
Selezionare bici 1/2
(BC 12.0 WR)
Sincronizzare reset
trasmettitore
(BC 12.0 WL)
IT
A: Bon de MENÚ:
Pulsación prolongada = Menú
Pulsación breve = SET/OK
B: Bon IZQUIERDO:
Pulsación breve = Mover a
la izquierda / reducir valor
C: Bon DERECHO:
Pulsación breve = Mover a
derecha / Aumentar valor
Pulsación prolongada =
Resetear datos de recorrido
A+B = Retroiluminación
on/off
A+C
– Pulsación prolongada =
Seleccionar bici 1/2
(BC 12.0 WR) Resetear
la sincronización del
transmisor
(BC 12.0 WL)
ES
A: Boo MENU:
Pressão longa = Menu
Pressão curta = DEFINIR/OK
B: Boo ESQUERDO:
Pressão curta = Comutar
para a esquerda/Diminuir valor
C: Boo DIREITO:
Pressão curta = Comutar
para a direita/Aumentar valor
Pressão longa = Repor
dados de percurso
A+B = Ligar/Desligar
retroiluminão
A+C Pressão longa =
Selecionar bicicleta
1/2 (BC 12.0 WR)
Repor sincronização
do transmissor
(BC 12.0 WL)
PT
A: MENU-knop:
Lang indrukken = Menu
Kort indrukken = SET/OK
B: LINKER knop:
Kort indrukken = Wisselen
van scherm naar links/
Waarde verlagen
C: RECHTER knop:
Kort indrukken = Wisselen
van scherm naar rechts /
Waarde verhogen
Lang indrukken = Ritdata reset
A+B = Achtergrondverlichting
aan/uit
A+C Lang indrukken =
Selecteer fiets 1/2
(BC 12.0 WR)
Handmatige
synchronisatie met
sensoren
(BC 12.0 WL)
NL
A: Przycisk MENU:
długie naciśncie = Menu
krótkie naciśnięcie = SET/OK
B: Lewy PRZYCISK:
krótkie naciśnięcie =
przełącz w lewo/zmniejsz
wartość
C: Prawy PRZYCISK:
krótkie naciśnięcie = przełącz
w prawo/zwiększ wartość
długie naciśnięcie = resetowa
nie danych trasy
A+B = wł/w światło tylne
A+C długie naciśncie =
wybierz rower 1/2
(BC 12.0 WR)
synchronizuj resetuj
nadajnik (BC 12.0 WL)
PL
A: Tlačítko MENU:
Dlouhé stisknutí = Menu
Krátké stisknutí = NASTAVIT/OK
B: LEVÉ tlačítko:
Ktké stisknutí = Přepnu
vlevo/Sžení hodnoty
C: PRAVÉ tlačítko:
Ktké stisknutí = Přepnu
vpravo/Zvýše hodnoty
Dlouhé stisknutí = Reset
dat jízdy
A+B = Zap./vyp. zadho
světla
A+C Dlouhé stisknutí =
Výběr kola 1/2
(BC 12.0 WR)
Synchronizace resetu
snímače (BC 12.0 WL)
CZ
A
B C
A
B
+
A B
+
A C
C
BUTTON OVERVIEW
1.
EN
IT
NL
DE
ES
PL
FR
PT
CZ
EXAMPLE VALUE:
WS = 2135 mm
CHOOSE YOUR SPECIFIC WHEEL SIZE /
WÄHLE DEINE SPEZIFISCHE RAGRÖSSE
2.
3. 4. 5.


Product specificaties

Merk: Sigma
Categorie: Sporthorloge
Model: BC 12.0 WL

Heb je hulp nodig?

Als je hulp nodig hebt met Sigma BC 12.0 WL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Sporthorloge Sigma

Handleiding Sporthorloge

Nieuwste handleidingen voor Sporthorloge