Siemon VP-BLNK Handleiding

Siemon Niet gecategoriseerd VP-BLNK

Lees hieronder de 📖 handleiding in het Nederlandse voor Siemon VP-BLNK (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 139 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

To assist safe installations, comply with the following:

A. Use caution when installing or modifying

telecommunications circuits.

B. Never touch uninsulated wire terminals unless

the circuit has been disconnected.

C. Never install this device in a wet location.

D. Never install wiring during a lightning storm.

VPOD Blank Panel Installation Instructions

Parts Description Required Tools

Rev. A 10/08 100.17753.00

To assist safe installations, comply with the following:

A. Use caution when installing or modifying

telecommunications circuits.

B. Never touch uninsulated wire terminals unless

the circuit has been disconnected.

C. Never install this device in a wet location.

D. Never install wiring during a lightning storm.

Make sure both cabinets

that the Blank will be

installed between, are level and

properly bayed together using all

(4) baying brackets. See Baying

Instructions.

1Install the (4) shoulder

bolts provided onto the

inside of the VPOD Frame as

shown, using the 5/32” Allen Tool.

(2) bolts on the top and (2) bolts

on the bottom.

2Place the Blank over the (4)

shoulder bolts and hook

the back plate into place.

Global Headquarters

Watertown, Connecticut USA

Tel: (1) 866-548-5814

For a complete listing of our global offices visit our web site www.siemon.com

5/32 Allen Tool

VPOD Vertical Blank Panel

(4) Shoulder Bolts

Product specificaties

Merk:	Siemon
Categorie:	Niet gecategoriseerd
Model:	VP-BLNK
Kleur van het product:	Zwart
Materiaal behuizing:	Metaal
Producten per pallet:	1 stuk(s)
Rackcapaciteit:	45U