Siemens WM10E164ME Handleiding

Siemens Wasmachine WM10E164ME

Lees hieronder de 📖 handleiding in het Nederlandse voor Siemens WM10E164ME (16 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

1 2 3 4 5 6

Programme has ended when...

... Start Pause flashes and the indicator light comes  /b

on.

Interrupting the programme

Programmes at high temperatures:

– Cool washing: Select / Spin.Rinse c

– Select /Pause. Start

Programmes at lower temperatures:

– Rinse (deactivate (Rinse Plus) button) or / Spin c 

select .C Empty

– Select /Pause. Start

Changing the programme, if ...

... you have selected the wrong programme by mistake:

– Reselect the programme.

– Select Start/Pause. The new programme starts from

the beginning.

Correct installation according to the

separate Installation instructions.

Check the machine

– Never use a damaged machine.

– Inform the after-sales service.

Connect the mains plug

Make sure your hands are dry.

Take hold of the plug only.

Turn the tap on

Compartment II: detergent for the main wash, water softener,

bleach, stain remover

Sorting and loading laundry

Follow the manufacturer's care information.

According to the information on the care labels.

According to type, colour, soiling and temperature.

Do not exceed the maximum load –> .page 7

Observe the important information –> page 6.

Insert large and small items of laundry.

Close the washing machine door. Take care not to trap items of laundry

between the washing machine door and the rubber seal.

Add detergent and care products

Measure accordingly:

Amount of laundry, soiling, water hardness (ask your water supply

company) and manufacturer's instructions.

Pour liquid detergent into the appropriate dispenser and place in the drum.

Your washing machine

Congratulations ä you have opted for a modern, high-quality

domestic appliance manufactured by Siemens. This washing

machine is distinguished by its economical water and energy

consumption.

Each machine that leaves our factory has been inspected thoroughly

to ensure that it functions properly and is in perfect condition.

For further information and a selection of our products go to our web

site: www.siemens-home.com

Environmentally friendly waste disposal 

All packaging must be disposed of in accordance with

environmental guidelines.

This appliance is certified in accordance with European Directive

2002/96/EEC on waste electrical and electronic equipment

(WEEE).

This directive provides the framework for the EU-wide collection and

reuse of used appliances.

Intended use

Contents Page

ʋIntended use .......................................................................................1

ʋProgrammes .......................................................................................1

ʋSetting and adjusting the programme ...........................................3

ʋWashing ...........................................................................................3/4

ʋAfter washing ......................................................................................4

ʋIndividual settings ..........................................................................5/6

ʋImportant information ...................................................................... 6

ʋOverview of programmes ................................................................7

ʋSafety instructions .............................................................................8

ʋConsumption values .........................................................................8

ʋCare .....................................................................................................9

ʋInformation on the indicator lights ..................................................9

ʋMaintenance .................................................................................... 10

ʋWhat to do if... .................................................................................. 11

Protection of the environment/Conservation tips

– Always fill the washing machine with a maximum amount of

laundry for the relevant programme.

– Wash normally soiled laundry without a prewash.

– Instead of , choose the programmecCottons 90 °C

cCottons 60 °C eco with the additional function j Perfect.

Comparable cleaning result with significantly lower energy

consumption.

– Measure the detergent according to the manufacturer's

instructions and water hardness.

– If the laundry is then dried in the tumble dryer, select the spin

speed according to the instructions of the dryer manufacturer.

Preparation Before washing for the first time

Wash once without any laundry –> page 9.

Setting and adjusting a programme

Spin

speed*

Programme selector Start/

Pause

Programme selector for

switching the machine on

and off and for selecting

the programme. Can be

turned in either direction.

Programmes

Detailed overview of programmes –> .page 7

The spin speed can be selected individually, irrespective of

the selected programme and programme progress.

cCottons Hard-wearing fabrics

+ Prewash

Hard-wearing fabrics, prewash at

30 °C

 Mix Different types of laundry

@ Super 15’ Short programme

2Rinse/ Spin Laundry washed by hand,c

2c(Rinse Plus) button activated;

if only using the spin cycle, deactivate

the button

C Empty Drain rinsing water for 

/ WoolÿHand/machine-washable wool

Delicate/ Silk Delicate washable fabrics

IEasy-Care Easy-care fabrics

Additional functions and spin

speeds –> Individual settings,

page 5.

Select Start/Pause

Washing

Detergent drawer with

compartments , , III~

Washing machine

door

Compartment : fabric softener, starch~c

Compartment I: detergent for prewash

ʋFor domestic use only

ʋFor washing machine-washable fabrics and hand-

washable wool in detergent solution

ʋTo be operated with cold drinking water and commer-

cially available detergents and care products which are

suitable for use in washing machines

– Do not leave children unattended near the

washing machine.

– The washing machine is not to be used by

children or persons not familiar with the

operating instructions.

– Keep pets away from the washing machine.

Dilute viscous fabric softener and fabric conditioner with water.

This prevents blockages.

Individual settings

ʑc(Spin speed in rpm/without final spin) –> model-dependent

Before and while the selected programme is running, the spin speed or  (without final rinse,

laundry soaks in the last rinsing water) can be set. The effects depend on the programme

progress.

The maximum selectable spin speed depends on the model and on which programme is

currently selected.

ʑAdditional functions –> and overview of programmes, see page 7

ispeed Perfect For washing in a shorter time with a washing outcome comparable to

that of the standard programme. Maximum load –> Overview of

programmes, page 7.

j Perfect For saving energy with a washing performance comparable to that of eco

the standard programme.

 (Easy-iron) Special spin sequence with subsequent fluffing. More gentle final spin

- residual moisture in the laundry slightly increased.

2c(Rinse Plus) Additional rinse cycle. For areas with very soft water or for further

enhancing the spin result.

ʑStart/Pause

For starting or interrupting the programme.

ʑSignal

1 step

2. Setting the

volume for...

1. Activate the

setting mode for

signal volume

Set to 1 step Press and 

hold +Release

Button signals Information signals

Set to 

Setting the

volume**

Setting the

volume**

1 step

direct

** you may need to select the function several times.

1000

900

800

600



Visually

impaired mode*

ON-OFF

Option:

ON-OFF Set to 

*Short signal - function on.

Long signal - function off.

1 step

1000

900

800

600



1000

900

800

600



1000

900

800

600



Important information

Protecting the laundry and the machine

– Empty pockets.

– Look out for metal items (paperclips, etc.).

– Wash delicates in a laundry bag (tights, curtains, underwired bras).

– Fasten zips, do up any buttons.

– Brush sand out of pockets and collars.

– Remove curtain fittings or place in the laundry bag.

Laundry with varying degrees of soiling

Wash new items of clothing separately.

light Do not prewash. If required, choose the additional function ispeed

Perfect.

Pretreat any stains as necessary.

intense Do not load as much laundry. Choose a programme with prewash.

Soaking Load laundry of the same colour

Pour soaking agent/detergent into compartment in accordance with the manufacturer's II

instructions. Turn the programme selector to and select /Pause. cCottons cold Start

After approx. 10 minutes, press Start/ , to pause the programme. Once the required  Pause

soaking time has elapsed, press Start/Pause, again to continue the programme, or select

a different programme.

Starching Laundry must not be treated with fabric softener

Starching is possible in all wash programmes if liquid starch is used. Pour starch into the fabric

softener compartment in accordance with the manufacturer's instructions (rinse first if ~

necessary).

Dyeing/bleaching

Dye should only be used in normal household quantities. Salt may damage stainless steel.

Always follow the dye manufacturer's instructions. Do use the washing machine for not

bleaching clothes.

All buttons are sensitive and need

only to be touched lightly.

If you press and hold the spin

speed button, the appliance

automatically cycles through the

setting options.

Additional

functions

Drum

Control panel

Service flap

Status

indicator

Removing the washing

Open the washing machine door and remove the washing.

If (without final spin) is active: Turn the programme 

selector to or select the spin speed. CEmpty

Select /Pause. Start

– Remove any foreign objects - risk of rusting.

– Leave the washing machine door and detergent

drawer open so that any residual water can

evaporate.

Turning the tap off

Not required for Aqua-Stop models –> refer to installation

instructions

Switching off

Turn the programme selector to .Off

(*model-dependent)

Overview of programmes –> refer to the table of consumption values on page 8 and notes on page 6.

Programmes °C max. Type of laundry Additional functions; information

cCottons cold, 40, 60, 90 °C 7 kg/

4 kg*

Hard-wearing fabrics, heat-resistant fabrics made of

cotton or linen i j 2speedPerfect*, ecoPerfect, (Easy-iron), (Rinse Plus)

+ 

Prewash 40 °C

I Easy-Care cold, 40, 60 °C

3 kg

Easy-care fabrics made of cotton, linen, synthetic

fibres or blended fabrics i j 2speedPerfect, ecoPerfect, (Easy-iron), (Rinse Plus)

 Mix 40 °C Fabrics made of cotton or easy-care fabrics i j 2speedPerfect, ecoPerfect, (Easy-iron), (Rinse Plus);

different types of laundry can be washed together

 Delicate/Silk cold

2 kg

For delicate, washable fabrics, e.g. made of silk,

satin, synthetic fibres or blended fabrics (e.g. cur-

tains)

i j 2speedPerfect, ecoPerfect, (Easy-iron), (Rinse Plus):

No spin between rinse cycles

/ ÿ Wool cold, 30 °C Hand or machine-washable fabrics made of wool or ä

containing wool

Particularly gentle wash programme to prevent shrinkage of laun-

dry. Longer programme breaks (fabrics rest in the detergent solu-

tion)

@ Super 15’ 30 °C Easy-care fabrics made of cotton, linen, synthetic

fibres or blended fabrics

Short programme, approx. 15 minutes,

suitable for lightly soiled laundry

Additional

programmes 2Rinse / Spin, Empty c C

*Reduced load for additional Perfect functionispeed

As a , with a maximum spin speed, is ideal.short programme  Mix 40 °C,

Programmes without prewash - add detergent to compartment , programmes with prewash - distribute the detergent between compartments and .II I II

0210 / 9000444121 WM10E164ME

Siemens-Electrogeräte GmbH

Carl-Wery-Str. 34

81739 München / Deutschland

Safety instructions

– Read the instruction manual and installation instructions and all other information enclosed

with the washing machine and act accordingly.

– Retain the documents for subsequent use.

Risk of electric shock – Never pull the cable to disconnect the mains plug.

– Never insert/disconnect the mains plug with damp hands.

Danger to life For worn-out appliances:

– Disconnect the mains plug.

– Sever the mains cable and discard along with the plug.

– Destroy the lock on the washing machine door. This will prevent

children from locking themselves in and risking their lives.

Danger of suffocation – Keep packaging, film and packaging parts out of the reach of

children.

Risk of poisoning – Keep detergents and care products out of the reach of children.

Risk of explosion – Items of laundry pretreated with cleaning agents containing

solvents, e.g. stain remover/cleaning solvent may cause an

explosion after being loaded into the washing machine.

Rinse items of laundry thoroughly by hand beforehand.

Risk of injury – The washing machine door can become very hot.

– Be careful when draining hot detergent solution.

– Do not climb onto the washing machine.

– Do not lean on the open washing machine door.

– Do not reach into the drum if it is still rotating.

– Be careful when opening the detergent drawer while the machine

is in operation.

Consumption values

Programme Additional

function Load Electricity con-

sumption** Water** Programme

duration**

cCottons 30 °C ** 7 kg 0.55 kWh 60 l 2:36 h

cCottons 40 °C ** 7 kg 0.69 kWh 60 l 2:36 h

cCottons 60 °C ** 7 kg 1.33 kWh 60 l 2:39 h

cCottons eco60 ºC j Perfect* 7 kg 1.05 kWh 47 l 3:08 h

cCottons 90 °C 7 kg 2.00 kWh 64 l 2:47 h

I Easy-Care 40 °C ** 3 kg 0.55 kWh 55 l 1:37 h

 Mix 40 °C ** 3 kg 0.48 kWh 32 l 1:03 h

cDelicate/Silk 30 °C 2 kg 0.21 kWh 31 l 0:41 h

/ ÿ Wool, cold 2 kg 0.10 kWh 39 l 0:40 h

/ ÿ Wool 30 °C 2 kg 0.19 kWh 39 l 0:40 h

* Programme setting with maximum spin speed for testing according to or in accordance with IEC 60 456.

** The values deviate from the indicated values depending on water pressure, water hardness, water inlet temperature, room tem-

perature, type and amount of washing and degree of soiling, utillised detergent, fluctuations in the mains voltage and selected

additional functions.

Care

Before washing for the first time

Do not load any laundry into the machine. Turn on the tap. Add the following to compartment

II:

– approx. 1 litre water

– detergent (dosage according to the manufacturer's instructions for light soiling and the

appropriate degree of water hardness)

Set the programme selector to and select /Pause. At the end of IEasy-Care 60 °C Start

the programme, turn the programme selector to .Off

Machine housing, control panel

– Wipe with a soft, damp cloth.

– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).

– Remove detergent and cleaning agent residue immediately.

– Do not clean with a jet of water.

Cleaning the detergent drawer...

...if it contains detergent or fabric softener residues.

1. Pull out, press insert down, remove draw completely.

2. To remove the insert: press the insert upwards from below with your

finger.

3. Clean the detergent dispenser tray and insert with water and a brush and

dry it.

4. Attach the insert and engage (connect the cylinder to the guide pin).

5. Push in the detergent drawer.

Leave the detergent drawer open so that any residual water can

evaporate.

Drum

Leave the washing machine door open so that the drum can dry out.

Rust stains - use chlorine-free cleaning agent, not steel wool.

Descaling Ensure there is no laundry in the machine

Descale the appliance according to the descaler manufacturer's instructions. This should not

be necessary if the correct dosage of detergent is used.

Information on the indicator lights model-dependent

A signal sounds and indicator lights for the spin speed flash:

Close the washing

machine door properly;

laundry may be caught.

Detergent solution pump

blocked; Clean the

detergent solution pump

–> page 10.

Drainage hose/waste pipe

blocked; Clean the drainage

hose at the siphon

–> page 10.

Open the tap completely,

supply hose kinked or

trapped;

Clean the filter

–> page 10,

Water pressure too low.

Motor fault. Call the after-

sales service.

Water in the base tub,

appliance leaking. Call the

after-sales service.

– Disconnect the Risk of electric shock.

mains plug.

– No solvents.Risk of explosion.

Maintenance

Detergent solution pump

Turn the programme selector to and disconnect the mains plug.Off

1. Open and remove the service flap.

2. For models with a drainage hose: Remove the drainage hose from the retainer and pull it

from the housing. Remove the container.

Remove the sealing cap, allow the detergent solution to flow out.

Replace the sealing cap and place the drainage hose in the retainer.

2* For models without a drainage hose: Carefully unscrew the pump cover until the

detergent solution begins to flow out. When the service flap is half full, close the pump cover

and empty the service flap. Repeat the above steps until all the detergent solution has

completely drained out.

3. Carefully unscrew the pump cover (residual water).

4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent

solution pump must rotate).

5. Replace the pump cover and screw it in place tightly.

6. Place the service flap back on and close.

To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into

compartment and start the programme.II C Empty

Drainage hose at the siphon

Turn the programme selector to and disconnect the mains plug.Off

1. Loosen the hose clamp, carefully remove the drainage hose (residual water).

2. Clean the drainage hose and siphon connecting piece.

3. Reattach the drainage hose and secure the connection with the hose clamp.

Filter in the water supply

Risk of electric shock.

Do not immerse the HydroSafe safety device in water (contains an electric valve).

Reduce the water pressure in the supply hose:

1. Turn off the tap.

2. Select any programme (except for ).2R inse/ cSpin// CEmpty

3. Select Start/Pause. Let the programme run for approximately 40 seconds.

4. Turn the programme selector to . Disconnect the mains plug. Off

Clean the filter:

1. Depending on model:

Disconnect the hose from the tap.

Clean the filter using a small brush.

and/or for Standard and Aqua-Secure models:

Remove the hose on the rear of the appliance,

Remove the filter with pliers and clean.

2. Connect the hose and check for leaks.

–Risk of scalding.

Allow the detergent solution to cool down.

– Turn off the tap.

What to do if...

Water is leaking out. – Attach/replace the drainage hose correctly.

– Tighten the screw connection of the supply hose.

ʑNo water supply.

Detergent not dispensed.

– /Pause not selected?Start

– Tap not turned on?

– Filter blocked? Clean the filter –> page 10.

– Supply hose kinked or trapped?

ʑWashing machine door

cannot be opened.

– Safety function active. Wait approx. 2 minutes.

– (without final spin) selected? –> page 3, 4.

ʑProgramme does not

start.

– Pause selected?Start/

– Washing machine door closed?

ʑDetergent solution is not

drained.

– (without final spin) selected? –> page 3, 4.

– Clean the detergent solution pump –> page 10.

– Clean the waste pipe and/or drainage hose.

ʑWater not visible in the

drum.

– Not a fault - water below the visible area.

ʑUnsatisfactory spin

result.

Laundry wet/too damp.

– Not a fault - the unbalanced-load detection system has cancelled

the spin cycle because of uneven distribution of the laundry.

Distribute small and large items of laundry evenly inside the

drum.

– (Easy-iron) selected –> page 5.

– Too low a speed selected? .–> page 5

ʑSpin cycle performed

several times.

– Not a fault - unbalanced load detection system adjusts the

imbalance.

ʑResidual water in the

compartment for care

products.

– Not a fault - the action of the care product is not affected.

– Clean the insert if necessary .–> page 9

ʑOdour formation in the

washing machine.

– Run programme without laundry. Use cCottons 90 °C

standard detergent.

ʑFoam escaping from the

detergent drawer.

– Too much detergent used?

If foam is escaping from the detergent drawer:

Mix 1 tablespoon of fabric softener with ½ litre of water and pour

into compartment II (not with outdoor or down fabrics).

– Reduce the detergent dosage for the next wash cycle.

ʑIntense noise formation,

vibrations and “walking”

during the spin cycle.

– Are the appliance feet fixed?

Secure the appliance feet . –> Installation instructions

– Transportation safety devices removed?

Remove the transportation safety devices –> Installation

instructions.

ʑThe indicator lights do

not function during

operation.

– Power cut?

– Fuses tripped? Reset/change the fuse.

– If the fault occurs repeatedly, call the after-sales service.

ʑProgramme sequence

longer than usual.

– Not a fault - unbalanced load detection system adjusts

imbalance by repeatedly distributing the laundry.

– Not a fault - foam detection system active - adds an additional

rinse cycle.

ʑDetergent residues on

the laundry.

– Occasionally, phosphate-free detergents contain water-insoluble

residues.

– Select / Spin or brush out the laundry after washing. Rinsec

If you cannot correct a fault yourself or a repair is required:

– Turn the programme selector to and remove the mains plug from the socket.Off

– Turn off the water supply and call the after-sales service –> Installation instructions.

Instruction manual

Washing

machine

Observe the safety

instructions on

page 8.

Read these instructions and the separate installation

instructions before operating the washing machine.

Product specificaties

Merk:	Siemens
Categorie:	Wasmachine
Model:	WM10E164ME
Apparaatplaatsing:	Vrijstaand
Kleur van het product:	Wit
Breedte:	600 mm
Diepte:	590 mm
Hoogte:	947 mm
Type lader:	Voorbelading
Deurkleur:	Wit
Trommelinhoud:	55 l
Energieverbruik wassen:	- kWu
Waterconsumptie per cyclus:	47 l
Onbalanscontrolesysteem:	Ja
Maximale centrifugesnelheid:	1000 RPM
Minimum centrifugesnelheid:	600 RPM
Deur openingshoek:	180 °
Nominale capaciteit:	7 kg
Wasprogramma's:	Hygiene/anti-allergy, Black