Siemens WM10B260GC Handleiding

Siemens Vaatwasser WM10B260GC

Lees hieronder de 📖 handleiding in het Nederlandse voor Siemens WM10B260GC (16 pagina's) in de categorie Vaatwasser. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
1 2 3 4 5 6
¥Ê ɯ ¥Ê - °C (Temp.) Select the temperature ( = cold)
- - - - - ³¯¯¯* (spin speed) Select the spin speed (* depending on the model) or
- - - - (Rinse stop = no final spin, laundry soaks in the last
rinsing water, display panel - - - -)
³¤ - ¤ (Finished in) Programme end after
Status indicators Programme status indicators:
tüümüücü§Ê Wash, rinse, spin, programme duration or end
sChildproof lock a page 5
Programme selector for switching
the machine on and off and for
selecting the programme. Can be
turned in either direction.
Programme selector Display panel
Function/option buttons
Start/
Pause
Individual settings
ʑSignal
1. Activate the setting mode for the signal volume
2. a) Set the volume for button signals (depending on model)
2. b) Set the volume for information signals
Information on the display panel depending on model
§ ³Å: Turn the (cold water) tap on fully;
supply hose kinked/trapped;
water pressure too low; service, clean the filter a page 10,
§ ³µ: Detergent solution pump blocked; service, clean the detergent solution pump
a page 10.
Drainage hose/waste pipe blocked; service, clean the drainage hose at the siphon
a page 10.
§ ´: Water in the base tub, appliance leaking. Turn off the tap. Call the after-sales service.
sChildproof lock active; Deactivating a page 5.
Other
displays
Switch off the appliance, wait for 5 seconds and switch it back on again. If the display
appears again, call the after-sales service.
+
To activate the
setting mode
set to Âpress and
hold
turn one
position to
the right
press and hold for a
further 5 secs until the
display elements light up;
setting mode is activated
set to  to exit the setting
mode for the signal
volume
press repeatedly until
the desired volume is
reached
or
turn one
position to
the right
press repeatedly until the
desired volume is
reached
set to  to exit the
setting mode for the
signal volume
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load a page 7.
Observe the important information a page 9.
Load items of laundry of varying sizes.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Adding detergent and care products
Measure accordingly:
Amount of laundry, level of soiling, water hardness (ask your water
supply company) and manufacturer's instructions.
Models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in
the drum.
During operation: Open the detergent drawer with care.
Insert for liquid detergent (depending on model), page 10.
Your washing machine Intended use
Contents Page
ʋIntended use ...................................................................................... 1
ʋProgrammes ...................................................................................... 1
ʋSetting and adjusting the programme .......................................... 3
ʋWashing .......................................................................................... 3/4
ʋAfter washing ..................................................................................... 4
ʋIndividual settings ......................................................................... 5/6
ʋInformation on the display panel ................................................... 6
ʋProgramme overview ....................................................................... 7
ʋSafety instructions ............................................................................. 8
ʋConsumption values ......................................................................... 8
ʋImportant information ...................................................................... 9
ʋInsert for liquid detergent ................................................................ 9
ʋCleaning and care ......................................................................9/10
ʋMaintenance .....................................................................................10
ʋWhat to do if ... ................................................................................11
Environmental protection/Conservation tips
Always fill the washing machine with a maximum amount of
laundry for the particular programme.
Wash normally soiled laundry without a prewash.
Instead of ÊüCottons 90 °C, select the programme
ÊüCottons 60 °C and additional function ¢ eco. Comparable
cleaning result with significantly lower energy consumption.
Measure the detergent according to the manufacturer's
instructions and water hardness.
If the laundry is subsequently dried in a tumble drier, select the
spin speed according to the tumble drier manufacturer's
instructions.
Prepa- Before washing for the first time
Run a wash cycle without any laundry a page 9
Setting** and adjusting programmes 1
2
Washing
Compartment ~: fabric softener, starch
Compartment I: detergent for prewash
ʋFor use in the household only
ʋFor machine-washable fabrics and hand-washable wool
in detergent solution,
ʋTo be operated with cold drinking water and commercially
available detergents and care products which are suitable
for use in washing machines
ʋThe washing machine may be used by children over the
age of 8 years old and by persons with reduced physical,
sensory or mental capacity or by persons with a lack of
experience or knowledge if they are supervised or have
been instructed by a responsible person.
Do not leave children unattended near the washing
machine
Children must not be allowed to play with the
appliance.
Children may not carry out any cleaning or
maintenance work unless under supervision.
Keep pets away from the washing machine.
Dilute thick fabric softener and conditioner with water.
This prevents blockages.
Detergent drawer
with compartments I, II, ~
Control panel
Service flap
Washing machine door
Correct installation according to the
separate installation instructions.
Checking the machine
Never use a damaged machine.
Inform the after-sales service.
Connecting the mains
plug
Make sure your hands are dry.
Take hold of the plug only.
Turning the tap on
Washing
End of programme when...
... §Ê appears on the display panel.
Interrupting the programme
Programmes at high temperatures:
To cool the laundry: Select Rinse m.
Press Start/Pause .
Programmes at lower temperatures:
Select Spin or Empty l (if only emptying: set (spin
speed) to - - - -).
Press Start/Pause.
Changing the programme, if...
... a wrong programme has been selected by mistake:
Reselect the programme.
Press Start/Pause . The new programme starts from
the beginning.
Pausing/continuing the
programme...
... e.g. for soaking a page 9.
Press Start/Pause . - Æ- appears on the display panel;
washing machine door cannot be opened. To continue
the programme, press Start/Pause .
Individual settings
ʑFunction buttons
The spin speed and temperature can be changed before and during the selected
programme. The effects depend on the programme progress.
°C (Temp.)
You can change the displayed washing temperature. The maximum washing temperature
that can be selected depends on the programme that has been set.
(spin speed // ; (Rinse stop = no final spin))
You can change the spin speed shown or select ; (Rinse stop = no final spin, laundry
remains in the water after the last rinse, display panel - - - -). The maximum selectable spin
speed depends on the model and on which programme is currently selected.
(Finished in)
When you select the programme, the relevant programme duration is displayed. You can
delay the start of the programme before it begins. The "Finished in" time can be set in
increments of one hour up to a maximum of 24 hours. Press the (Finished in) button
repeatedly until the required number of hours is displayed (h = hour). Press Start/Pause .
ʑOption buttons a Programme overview, page 7
i speed For washing in a shorter time with a washing result comparable to that
of the standard programme. Maximum load
a Programme overview, page 7.
¢ eco For saving energy with a comparable washing effect to the standard
programme.
h Rinse+ Additional rinse cycle. For areas with very soft water or for further
enhancing the spin result.
ʑChildproof lock
s
on the display panel
You can lock the washing machine to prevent the functions you have
set from being changed inadvertently.
ON/OFF: after the start/end of the programme, press and hold the
Start/Pause button for approx. 5 seconds.
Note: The childproof lock can remain activated until you wish to start
the next programme, even after switching off the machine.
Then you can deactivate the childproof lock before starting the
programme and activate it again as necessary once the programme
has started.
ʑStart/ Pause
To start, pause and continue the programme and to activate/deactivate the childproof lock.
3
Switching off
Turn the programme selector to Off.
Turning the tap off
Not required for Aqua-Stop models
a Installation instructions, page 7.
Removing the laundry
Open the washing machine door and remove the laundry.
If - - - - (Rinse stop = no final spin) is active: Turn the
programme selector to Empty l or select a spin speed.
Press Start/Pause .
Remove any foreign objects - risk of rusting.
Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Congratulations – You have opted for a modern, high-quality
domestic appliance manufactured by Siemens. The washing machine
is distinguished by its economical consumption of water and energy.
Each appliance which leaves our factory is inspected thoroughly
to ensure that it functions properly and is in perfect condition.
For further information and a selection of our products go to our web
site: www.siemens-home.com
You can find the contact details for your nearest after-sales service
here or in the after-sales service directory (depending on model), see
also Installation Instructions, page 7.
GB 0844 8928999 Calls from a BT landline will be charged at up
to 3 pence per minute. A call set-up fee of up to 6 pence may apply.
IE 01450 2655 0,03€ per minute at peak. Off peak 0,0088per
minute.
Environmentally friendly waste disposal
All packaging must be disposed of in accordance with environmental
guidelines.
This appliance is certified in accordance with European Directive
2002/96/EC on waste electrical and electronic equipment (WEEE).
This directive provides the framework for the EU-wide collection and
reuse of used appliances.
Compartment II: detergent for main wash,
water softener, bleach, stain remover
Programmes
Detailed programme overview a page 7.
Temperature and spin speed can be selected individually, depending on the
selected programme and programme progress.
ÊüCottons Hard-wearing fabrics
+ Prewash oHard-wearing fabrics, prewash at 30 °C
Ï Easy-Care Easy-care fabrics
+ Prewash oEasy-care fabrics, prewash at 30 °C
ÍüMix Different types of laundry
5 Delicate/Silk Delicate washable fabrics
ÿ Wool ÉHand/machine-washable wool
Rinse Extra rinse with spin
Spin Extra spin with selectable speed
Empty rinsing water for - - - -c(Rinse stop = no final spin);
for this, set (spin speed) to - - - -
5 ecoSpeed 30’/15’ Short programmes
¬ Hygienic Hard-wearing fabrics
¼Sportswear Fabrics made from microfibre
g Shirts/Business Non-iron shirts
Jeans Dark-coloured fabrics
Select Start/Pause
If the function buttons are held for
longer, the appliance automatically
runs through the display options.
**If the s symbol flashes on the
display panel, the childproof lock
is active a Deactivating, page 5.
Function and option buttons a
Individual settings, page 5.
Washing machine
door handle
7
9511 / 9000877883 WM10B260GC
BSH Hausgeräte GmbH
Carl-Wery-Straße 34 81739 München GERMANY
Manufactured by BSH Hausgeräte GmbH under Trademark License of Siemens AG
Programme overview a Refer to the table of consumption values on page 8 and the instructions on page 9.
* reduced load when using the ispeed option.
Programmes without prewash - add detergent to compartment II, programmes with prewash - distribute the detergent between compartments I II and 4
Programmes °C max. Type of laundry Options; information
ÊüCottons ¥Ê - 90 °C
6 kg/
3,5 kg*
Hard-wearing fabrics, heat-resistant fabrics made of
cotton or linen
i speed*, hRinse+, ¢ eco
+ Prewash o
¬üHygienic ¥Ê - 60 °C
i speed*, hRinse+, ¢ eco; for particularly sensitive skin,
longer wash cycle at selected temperature, higher water level, addi-
tional rinse cycle
Ï Easy-Care ¥Ê - 60 °C 3 kg Easy-care fabrics made of cotton, linen, synthetic
fibers or blended fabrics i speed, hRinse+, ¢ eco
+ Prewash o
ÍüMix ¥Ê - 40 °C 2.5 kg Fabrics made of cotton or easy-care fabrics i speed, h Rinse+, ¢ eco; different types of laundry can be
washed together
cJeans ¥Ê - 40 °C 3 kg Dark-coloured fabrics made of cotton and dark easy-
care fabrics i speed, hRinse+, ¢ eco; Reduced rinse and final spin cycle
g Shirts/Business ¥Ê - 60 °C
2 kg
Non-iron shirts made of cotton, linen, synthetic fibres
or blended fabrics i speed, h Rinse+, ¢ eco
5 Delicate/Silk ¥Ê - 40 °C
For delicate, washable fabrics, e.g. made of silk,
satin, synthetic fibres or blended fabrics
(e.g. curtains)
i speed, h Rinse+, ¢ eco
:Wool É ¥Ê - 40 °C Hand or machine-washable fabrics made of wool or
containing wool
Particularly gentle wash programme to prevent shrinkage of
laundry. Longer programme breaks (fabrics rest in the detergent
solution)
¼Sportswear ¥Ê - 40 °C Fabrics made from microfibre i speed, hRinse+, ¢ eco
? ecoSpeed 30’/15’ ¥Ê - 40 °C 3,5 kg
2 kg
Easy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics
Short programme,
suitable for lightly soiled items
Additional programmes Rinse m, Spin , Empty l
11
8
Safety instructions
Read the instruction manual and installation instructions and all other information enclosed
with the washing machine and act accordingly.
Retain the documents for subsequent use.
Risk of electric shock – Never pull the cable to disconnect the mains plug.
Only plug in or disconnect the mains plug if your hands are dry.
Danger to life For worn-out appliances:
Disconnect the mains plug.
Sever the mains cable and discard along with the plug.
Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and risking their lives.
Danger of suffocation Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning Keep detergents and care products out of the reach of children.
Risk of explosion Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover/cleaning solvent may cause an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury The washing machine door can become very hot.
Be careful when draining hot detergent solution.
Do not climb onto the washing machine.
Do not lean on the open washing machine door.
Do not reach into the drum if it is still rotating.
Consumption values
Programme Load Electricity*** Water*** Programme duration***
ÊüCottons 20 °C 6 kg 0.30 kWh 68 l 2 @h
ÊüCottons 40 °C* 6 kg 0.95 kWh 68 l 2 @ h
ÊüCottons 60 °C 6 kg 1.60 kWh 68 l 2 @ h
ÊüCottons 90 °C 6 kg 2.45 kWh 76 l 2 @ h
ÏüEasy-Care 40 °C* 3 kg 0.70 kWh 46 l 1 B h
ÍüMix 40 °C 2.5 kg 0.40 kWh 44 l 1 h
Delicate/Silk 30 °C 2 kg 0.30 kWh 37 l B h
ÿüWool É30 °C 2 kg 0.20 kWh 43 l B h
*Programme setting for testing in accordance with currently applicable EN60456 standard.
Note on comparative tests: When testing the test programmes, wash the specified load using the
maximum spin speed.
Programme Additional
function Load Annual energy consumption Annual water consumption
ÊüCottons 40/60 °C ¢ eco** 6 kg/3 kg 153 kWh 10560 l
** Programme settings for testing and energy labelling in accordance with europian standard
60456 Ed5 with cold water (15 °C).
***The values may deviate from the specified values depending on water pressure, water hardness,
and inlet temperature, ambient temperature, type, amount and level of laundry soiling, detergent
used, fluctuations in the power supply and selection of options.
9
Important information
Before washing for the first time
Do not put any laundry in the machine. Turn the tap on. Pour into compartment II:
approx. 1 litre water
detergent (dosage according to the manufacturer's instructions for light soiling and the appropriate
degree of water hardness)
Turn the programme selector to Ï Easy-Care 60 °C and press Start/Pause . At the end of the
programme, turn the programme selector to Off.
Protecting the laundry and the machine
When measuring the amount of all detergents/additives and cleaning agents, always check the
manufacturer's instructions.
Empty pockets.
Look out for metal items (paperclips, etc.).
Wash delicates in a laundry bag (tights, curtains, underwired bras).
Fasten zips, do up any buttons.
Brush sand out of pockets and collars.
Remove curtain fittings or place in the laundry bag.
Loading laundry
Load items of laundry of varying sizes.
Take care not to trap items of laundry between the washing machine door and the rubber seal.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, select the i speed option.
Pretreat any stains as necessary.
heavy Do not load as much laundry. Select the programme with prewash.
Soaking Load laundry of the same colour
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions.
Turn the programme selector to Ê Cottons 30 °C and press Start/Pause . After approx. 10
minutes, press Start/Pause to stop the programme. Once the required soaking time has elapsed,
press Start/Pause again to continue the programme or to select a different programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liquid starch is used. Pour starch into the ~ fabric
softener compartment in accordance with the manufacturer's instructions (rinse first if necessary).
Dyeing/bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel. Always
follow the dye manufacturer's instructions. Do not use the washing machine for bleaching clothes.
I nsert for liquid detergent depending on model
Position the insert for dispensing liquid detergent:
Remove the detergent drawer completely a page 10.
Slide the insert forwards.
Do not use the insert (slide upwards):
For gel-type detergents and washing powder,
for programmes with Prewash (Vorwäsche) or the (Finished in)
function.
Cleaning and care
ʑMachine housing, control panel
Remove detergent residue immediately.
Wipe off with a soft, damp cloth.
Do not clean with a jet of water.
10
Cleaning and care
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove drawer completely.
2. To remove the insert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and dry it.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
ʑDrum
Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not steel wool.
ʑDescaling Make sure that there is no laundry in the machine.
This should not be necessary if the correct detergent dosage has been used. If it is necessary, however,
proceed according to the descaling agent manufacturer's instructions. Suitable descalers can be obtained via
our website or from our after-sales service (a page 1).
Maintenance
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
6. Open the service flap
7. Carefully unscrew the pump cover (residual water).
8. Clean the interior, pump cover thread and pump housing (the impeller in the
detergent solution pump must rotate).
9. Replace the pump cover and screw it on tightly.
10. Replace the service flap.
To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of
water into compartment II and start the Empty l programme.
Drainage hose at the siphon is blocked
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp and carefully remove the drainage hose (caution: residual
water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water inlet is blocked
Risk of electric shock
Do not immerse the Aqua-Stop safety device in water (it contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except for Spin c/ Empty l).
3. Press Start/Pause . Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter with a small brush.
and/or on standard and Aqua-Secure models:
Remove the hose from the rear of the appliance,
Take out the filter with a pair of pliers and clean it.
6. Connect the hose and check for leaks.
Risk of scalding
Allow the detergent solution to cool down.
Turn off the tap.
Risk of electric shock. Disconnect the mains plug.
Risk of explosion. No solvents.
11
What to do if...
ʑ
Water is leaking out. Attach/replace the drainage hose correctly.
Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not dispensed.
Start/Pause not selected?
Tap not turned on?
Filter blocked? Clean the filter a page 10.
Supply hose kinked or trapped?
ʑWashing machine door
cannot be opened.
Safety function active. Programme stopped? a page 4.
- - - - (Rinse stop = no final spin) selected? a page 3,4.
ʑProgramme does not start. Start/Pause or (Finished in) time selected?
Washing machine door closed?
Childproof lock active? Deactivating a page 5.
ʑDetergent solution is not
drained.
- - - - (Rinse stop = no final spin) selected? a page 3, 4.
Clean the detergent solution pump a page 10.
Clean the waste pipe and/or drainage hose.
ʑWater not visible in the
drum.
Not a fault - water below the visible area.
ʑSpin result not satisfactory.
Laundry wet/too damp.
Not a fault - the imbalance monitoring system has interrupted the spin
because the laundry is unevenly distributed.
Distribute large and small items of laundry evenly in the drum.
Speed selected too low? a page 5.
ʑThe programme duration
changes during the wash
cycle.
Not a fault - the programme cycle is optimised for the particular
washing process. This can cause changes in the programme duration
on the display panel.
ʑSpin cycle performed
several times.
Not a fault - unbalanced-load detection system is adjusting the
imbalance.
ʑResidual water in the 0
compartment for care
products.
Not a fault - the action of the care product is not affected.
Clean the insert if necessary a page 10.
ʑOdour formation in the
washing machine.
Run programme Ê Cottons 90 °C without laundry. Use standard
detergent.
ʑStatus display t flashing.
Appliance has detected a
detergent overload.
Too much detergent used?
Mix one tablespoonful of fabric softener with ½ litre water and pour
into compartment II (Not for outdoor fabrics, sportswear fabrics or
those made with down.)
Reduce the detergent dosage for the next wash cycle.
ʑLoud noises, vibrations and
“wandering” during the
spin cycle.
Are the appliance feet fixed?
Secure appliance feet a Installation instructions.
Transportation safety devices removed?
Remove transportation safety devices a Installation instructions.
ʑDisplay panel/indicator
lamps do not function
during operation.
Power cut?
Circuit breakers tripped? Switch the circuit breakers back on or
replace.
If the fault occurs repeatedly, call the after-sales service.
ʑProgramme sequence
longer than usual.
Not a fault - unbalanced-load detection system is adjusting the
imbalance by repeatedly redistributing the laundry.
Not a fault - foam detection system active - adds an additional rinse
cycle.
ʑThere are detergent
residues on the laundry.
Occasionally, phosphate-free detergents contain water-insoluble
residues.
Select Rinse m or brush down the laundry after washing.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
Turn the programme selector to Off and remove the mains plug from the socket.
Turn off the water supply and call the after-sales service a Installation instructions.
Instruction manual
Washing
machine
Observe the safety
instructions on
page 8.
en
Do not operate the washing machine until
you have read these instructions and the
separate installation instructions.


Product specificaties

Merk: Siemens
Categorie: Vaatwasser
Model: WM10B260GC

Heb je hulp nodig?

Als je hulp nodig hebt met Siemens WM10B260GC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Vaatwasser Siemens

Handleiding Vaatwasser

Nieuwste handleidingen voor Vaatwasser