Siemens RDG260KN Handleiding

Bekijk gratis de handleiding van Siemens RDG260KN (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over Siemens RDG260KN of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Operating Instructions

en

RDG200KN, RDG204KN

RDG260KN, RDG264KN

RDG2..KN – Room thermostat with KNX communications allowing users to set ideal

temperature, relative humidity and CO level (RDG204KN&RDG264KN). The thermostat offers2

the operating modes Comfort, Economy and Protection.

In addition, it can operate in Auto mode as per a schedule via KNX bus or local.

The fan operates either in Auto mode or at the selected speed in Manual mode.

Users can either use the factory settings or adjust settings as desired.

Main display Operating mode

Operating mode selection*Holiday mode

SchedulerProtection mode

Fan speed selectionEconomy mode

Escape

Comfort mode

Delete schedule

Cooling mode

Confirm parameters

Electric heater active

Number of schedules or slave alarms

Heating mode

Scheduler mode

Outside temperature

Manual changeover

Parameter

Auto mode

Digits for setpoint display

Temporary timer

Time bar for schedule

Fault

Additional user information, such as outside temperature, time of

day from KNX bus, relative humidity, or indoor air quality

Fresh air indication

Condensation in room

(dewpoint sensor active) or

humidity control active

Morning: 12-hour format; Afternoon: 12-hour format

Relative humidity

Degrees Celsius or Fahrenheit

Indoor air quality

CO2 values

Button lock

Value with thermometer: Digits for room temperature display

Automatic fan

Operating mode button * Fan mode button

Rotary knob

Fan speed I

Green leaf Protection hospitality mode or scheduler buttonFan Speed II

IAQ level indicator(Valid only for RDG2..4KN: Available from product

index G or higher versions)

Fan Speed III

* When P002 = 3, the icon is displayed as and the button can be used to switch unit between °C and °F. (scan the above QR

code for the latest version info).

Changing the room temperature

Turn the rotary knob clockwise to increase, or counterclockwise to decrease the current room

temperature setpoint.

Note: The setting range is 5...40 °C; it can be limited by parameters P013 and P016.

(for parameter settings, see Control parameters on page 2).

Adjusting the fan speed

Speed I

Press the right button repeatedly until the desired fan mode is reached.

In Auto mode , the fan speed is automatically selected by the thermostat

depending on setpoint and current room temperature.

In Manual mode, the fan operates independently and runs at the speed set by the

user: speed I / speed II / speed III.

Speed II

Speed III

Changing the operating mode

Comfort mode

Economy mode

Protection modeAuto mode

1. Comfort mode

In Comfort mode, the thermostat maintains the room temperature at the setpoint which can be adjusted

with the rotary knob.

2. Economy mode

In Economy mode, the thermostat maintains the room temperature at a lower or higher setpoint, thus saving

energy and money.

The thermostat can be set to Economy mode either by pressing the operating mode button if enabled

(P002 = 2), or via an external signal (switch or KNX bus command) such as keycard or presence detector.

The Economy setpoints are factory-set to 15 °C for heating and 30 °C for cooling. They can be adjusted via

parameters P019 and P020 (for parameter settings, see Control parameters on page 2).

3. Protection mode

In Protection mode, the thermostat stops operating. However, if the room temperature drops below 8 °C,

heating is switched on to protect the room against frost.

The thermostat switches to Protection mode when the window contact (local or on KNX) is activated.

The setpoints for Protection mode can be changed by your HVAC installer if desired:

Changes made by installer: Frost protection: _________ C Heating protection: __________C˚˚

4. Auto mode

In Auto mode, the thermostat automatically switches over between Comfort and Economy mode as per the

KNX bus or local schedule (enabled via P005).

If no schedule is available, Comfort replaces Auto.

Important: If setpoints are set to Off, there is no protective heating or cooling function.Risk of frost!

Green leaf indication

The green leaf indication is an energy-efficient setting and indicates the end user settings.

Green leaf: Settings are within the

preset energy-efficient range.

Red leaf: Settings exceed the preset energy-

efficient range.

End users can press the red leaf and return to

the

energy-efficient range.

IAQ level indication

Disable IAQ color indication by selecting P009 = 7 or 9.

 (Good air quality)

 (Fair air quality)

 (Bad air quality)

Reminder to clean filter, display of external faults

FIL **

AL1 **

AL2 **

AL3 **

This message reminds you to clean the filter on your HVAC equipment.

It appears after _______ "fan operating hours" and disappears when the thermostat is

manually set to Protection. These fault messages tell you an external fault has occurred **:

AL1 :AL2 : _______________________ __________________________

AL3 : _______________________

** Needs to be configured by HVAC installer

Scheduler

Set schedule



Press button once and then turn the rotary knob or press button continuously to select programming

mode PROG.

Press button once to enter scheduler mode .

Turn the rotary knob to select the weekday to be set, then press button once.

Turn the rotary knob to view existing schedules, then press button once to select the schedule that need

to be edited.

Comfort mode setting of selected schedule and icons and are displayed, then press button once.

The start time for Comfort flashes and can be changed by turning the rotary knob.

Press button once to confirm the adjusted value and enter the Economy mode setting for the schedule.

Icons and are displayed, then press button once. The start time for Economy flashes and can be

changed by turning the rotary knob.

Press button once to confirm the adjusted value. Then users can view other schedules by turning the

rotary knob and enter other schedule settings (same as edited schedule).

Note: User can press button to delete any schedule or (Esc) to cancel the change. The maximum number of set schedule is

three per day.

Product specificaties