Shure SE215 Pro Handleiding

Shure Headset SE215 Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor Shure SE215 Pro (4 pagina's) in de categorie Headset. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

General Description

Shure Sound Isolating™ Earphones, deliver a detailed soundstage free from

outside noise. The powerful and stylish Shure SE earphones come with a

detachable cable, adapters, a durable carrying case, and interchangeable

Sound Isolating sleeves for a comfortable and personalized fit.

Wearing the Earphones

The following are some suggested ways of wearing the earphones.

Over the ear in back

Wear the cable over the ear and secure it behind the head to help keep the

earphones in place during physical activity.

Tighten the cable and take up slack by raising the cable cinch.

Detachable Cable

You may need to detach the cable from the earphones to attach optional

components or to replace the cable if it becomes damaged. To prevent acci-

dental separation, the connector has a snug fit. Take special care to prevent

damage to the earphone and connector.

• Do not use pliers or other tools.

• Grasp the connector and the earphone as close as possible to where

they join.

• Pull straight apart—do not twist. Cable is a snap fit, not threaded.

Note: If you pull at an angle, the connector will not detach.

• Do not pull on the cable or put any pressure on the earphone nozzle.

• Listen for a click when connecting.

• When reattaching the cable, match the "L" and "R" markings. For clear

cables and earphones, match the color dots (Red=Right, Blue=Left).

Audible click when properly connected

Inserting the Earphones

Insert the earphones so they form a tight seal. The fit of the earphone can greatly affect sound quality.

SE215M

Shure Earphones

Important: If there seems to be a lack of low frequency response (bass), this means that the earphone sleeve is not forming a tight seal. Gently push the earphone

deeper into the ear canal or try a different sleeve.

Warning: Do not push the earphone sleeve beyond the ear canal opening.

Changing Sleeves

• Twist and pull to remove the sleeve from the nozzle.

• Slide on a new sleeve so that it completely covers the barb and the

nozzle.

Caution: If the barb or any of the nozzle is exposed, the sleeve is not prop-

erly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure

proper fit and performance, use only sleeves supplied by Shure (unless using

custom molded sleeves).

Removing the Earphones

Grasp the body of earphone and gently twist to remove. Do not pull on cable to remove earphone.Note:

Shure IncorporatedSE215M Shure Earphones

2017/10/092/4

Choosing a Sleeve

Select an earphone sleeve that provides the best fit and sound isolation. It

should be easy to insert, fit comfortably, and easy to remove.

Soft Flex Sleeves: In small, medium, and large

sizes. Made from pliable rubber.

Soft Foam Sleeves: Compress the foam sleeve

between your fingers and insert into the ear canal.

Hold in place for about ten seconds while the foam

expands.

Triple-Flange Sleeves: If desired, use scissors to

trim the stem on the sleeve.

Using the Remote

Use the remote to control compatible media phone players.

• Click the center button once.Answer/End Call:

• When answering calls speak in a normal manner.

• Answer/end calls on most phones by pressing the center button once.

Please read your mobile device's user guide for more information on how to

use the answer/end button, check for additional features, or to troubleshoot

usage problems.

NOTE: On some phones it might be necessary to adjust the volume when

switching from phone call to music.

For more information about compatible models go to: www.shure.com

Maintenance and Cleaning

Careful maintenance ensures a tight seal between the sleeve and nozzle,

improving sound quality and product safety.

• Keep the earphones and sleeves as clean and dry as possible.

• To clean sleeves, remove them from earphones, gently rinse in warm

water and air dry. Foam sleeves require a longer drying time. Inspect for

damage and replace if necessary. Ear sleeves must be completely dry

before reusing.

• Wipe the earphones and sleeves with mild antiseptic to avoid infections.

Do not use alcohol-based disinfectants.

• Do not expose earphones to extreme temperatures.

• Replace sleeves if they do not fit properly.

• Do not attempt to modify this product. Doing so will void the warranty

and could result in personal injury and/or product failure.

Cleaning the Earphone Nozzle

If you notice a change in sound quality, remove the sleeve and check the

nozzle of your earphone. If nozzle is blocked, clear obstruction by using wire

loop end of cleaning tool.

If no obstruction is found or if sound quality does not improve, replace the

sleeve with a new sleeve.

Cleaning Tool

Wire Loop

Caution: When cleaning, do not force any object through the earphone

nozzle! This will damage the earphone sound filter.

Warning: The cleaning tool is only to be used to clean the earphones. Any

other use, such as using the tool to clean ears or foam sleeve, could result

in injury.

The cable connectors to the earphones may collect debris or other deposits

that can affect audio quality. If this happens, disconnect the cables and clean

them using a dry cotton swab.

Specifications

Transducer Type

Single High-Definition MicroDriver

Sensitivity

at 1 kHz

107 dB SPL/mW

Shure IncorporatedSE215M Shure Earphones

3/42017/10/09

Product specificaties

Merk:	Shure
Categorie:	Headset
Model:	SE215 Pro
Kleur van het product:	Transparant
Gewicht:	30 g
Snoerlengte:	1.62 m
Connectiviteitstechnologie:	Bedraad
Meegeleverde kabels:	Audio (3,5 mm)
Ruisonderdrukking:	Ja
Opbergetui:	Ja
Draagwijze:	In-ear
Aanbevolen gebruik:	Podium/studio
Headset type:	Stereofonisch
Impedantie:	17 Ohm
Frequentiebereik koptelefoon:	22 - 17000 Hz
3,5mm-connector:	Ja
Microfoontype:	In lijn
Temperatuur bij opslag:	-29 - 74 °C
Gevoeligheid koptelefoon:	107 dB
Oordopjes:	Ja
Kleur kabel:	Zwart
Afneembare kabel:	Ja
Driver type:	Dynamisch
Meegeleverde Audio adapters:	6,3 mm
Bedrijfstemperatuur (T-T):	-18 - 57 °C
Type product:	Headset