Shure Centraverse CVO Handleiding

Bekijk gratis de handleiding van Shure Centraverse CVO (2 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 39 mensen en kreeg gemiddeld 4.6 sterren uit 5 reviews. Heb je een vraag over Shure Centraverse CVO of wil je andere gebruikers van dit product iets vragen? Stel een vraag

©20 Shure Incorporated13

27A20378 (Rev. )3

Model Variations

CVO-B/C: Cardioid, black

CVO-W/C: Cardioid, white

Centraverse Overhead Microphone

The Centraverse CVO is a professional low pro-

file electret condenser microphone designed for

overhead sound reinforcement applications. An in-

tegrated wire aiming hanger is included for optimal

placement above choirs and other ensembles with

minimal effort.

Note: Model availability depends on region.

See your local Shure dealer or distributor for

details.

45

Features

• Cardioid pickup pattern

• Commshield® technology guards against

unwanted RF interference from portable

wireless devices (smartphones, etc.)

• Superior Shure design and rugged, dependable

construction

• Attached 25 ft XLR cable

• Included snap-fit windscreen

Installation

1. Attach the wire hanger:

• Snap the wire into the groove on the microphone body.

• Guide the cable through the spiral at the end of the wire,

beginning at the bottom and working toward the exit.

2. Hang the microphone according to the guidelines for placement.

3. Aim the microphone toward the sound source by holding the wire

hanger in place and twisting the microphone body.

4. If necessary, tie a strong transparent thread or fishing line to the loop at

the end of the wire hanger and attach it to a ceiling anchor for additional

stability.

5. Connect the XLR cable to a mixer or P.A. system.

Note: This microphone requires +48V phantom power to operate.

.6 – 1 m

(2 – 3 ft.)

.6 – 1 m

(2 – 3 ft.)

1.8 – 3m

(6 – 9 ft.)

0.6 – 1m

(2-3 ft.)

Microphone Placement and Use

1. If using multiple Shure Centraverse overhead micro-3:1 Rule:

phones, the distance between the microphones should be three

times greater than the distance between the microphone and the

sound source.

2. Place the microphone in front of the choir, above Choir Installations:

their heads and aimed at the back row.

3. Use the supplied snap-fit windscreen to eliminate wind Windscreen:

noise and plosives. To install the windsreen, snap it into the first groove

on the microphone head. To remove the windscreen, locate the gap

in the ring and use your fingernail to pull the windscreen off from the

right-hand side.

Centraverse™ Series

Installed Sound Microphones

CVO

Product specificaties