Shure 596LB Handleiding

Bekijk gratis de handleiding van Shure 596LB (2 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 14 mensen en kreeg gemiddeld 4.8 sterren uit 7 reviews. Heb je een vraag over Shure 596LB of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Model 596LB User Guide

©2 Shure Incorporated013

27D2756 (Rev. )6

Printed in U.S.A.

DYNAMIC HAND-HELD COMMUNICATIONS MICROPHONE

GENERAL

The Shure Model 596LB is a compact, hand-held dynamic,

low-impedance communications microphone with a 200 to

5,000 Hz frequency response. Designed especially for voice

communications use, it is an economical unit for applica-

tions in budget-restricted paging and other installations. The

microphone is compatible with many popular paging ampli-

fier inputs. Its tailored frequency response provides clear, in-

telligible operation. The ARMO-DUR case is small, light

and sturdy, and fits comfortably in the palm of the hand. It

has a long-life push-to-talk switch, and a durable coiled ca-

ble for years of reliable performance. The 596LB has a

low-impedance output.

The 596LB is furnished with a sturdy mounting bracket for

permanent installation.

Features

•Omnidirectional pickup pattern for optimum off-axis operation

•Frequency response from 200 to 5,000 Hz, tailored for voice

communications

•Economical-the perfect choice for modest paging installations

•Rugged and dependable under most operating conditions

•Silver-plated switch contacts for long-term low contact resis-

tance and reliable performance

•Long-life vinyl-jacketed coil-cord for years of trouble-free

operation

•Output impedance matches most paging amplifier inputs

•Virtually indestructible ARMO-DUR case

•Sturdy, convenient mounting button for attaching to equipment

or nearby surface using supplied mounting bracket

MOUNTING

The 596LB is provided with a rear-case hang-up button for

use with a mounting bracket on or near associated equip-

ment. The bracket has mounting holes with clearance for

No. 6 or No. 8 screws (not supplied).

CONNECTIONS

The internal switch connections of the 596LB are shown in

Figure 1. The 596LB has a four-conductor, coiled-cord cable

(two conductors shielded) and a double-pole, double-throw,

push-button switch to control the microphone circuit and an

external relay or switching circuit. The RED and BLACK un-

shielded leads control the relay or switching circuit.

Refer to the following tables and to the wiring diagram below.

WIRING DIAGRAM

FIGURE 1

The 596LB can be wired for balanced-line operation and is

recommended for use where long cable lengths are

required, or conditions where severe hum pickup may exist.

The 596LB can be fed directly into a standard

low-impedance amplifier input, or a Shure A95 Series Line

Matching Transformer (at the equipment end of the cable)

can be used for coupling the 596LB to the input of a

high-impedance amplifier. A two-conductor shielded cable

can be used for extending only the microphone circuit. If

both the microphone and the remote circuit are to be

extended, a four-conductor with two shielded conductors

should be used.

The microphone circuit of the 596LB is normally open when

the microphone switch button is not depressed.

INPUT TYPEWIRE

COLOR

FUNCTION XLR

CONNECTOR

1/4 IN. PHONE

PLUG

WHITEAUDIOPIN 2TIP

UNBALANCEDGREENAUDIO GROUNDPIN 3SLEEVE

SHIELDCHASSIS GROUNDPIN 1SLEEVE

WHITEAUDIO +PIN 2TIP

BALANCEDGREENAUDIO –PIN 3RING

SHIELDCHASSIS GROUNDPIN 1SLEEVE

RED

BLACK

WHITE

GREEN

N.C.

MK1

C4

.001

S1

W2

W3

W1

W6

SWITCH

CLOSURE

AUDIO –

AUDIO +

SHIELD

SWITCH

CLOSURE

Product specificaties