Shop-Vac 5985200 Handleiding

Shop-Vac Stofzuiger 5985200

Lees hieronder de 📖 handleiding in het Nederlandse voor Shop-Vac 5985200 (12 pagina's) in de categorie Stofzuiger. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
User manual
Please review before operating vac.
Manual del usuario
Por favor lea esta manual antes de usar la aspiradora.
Series SS11, SS12, SS14, SS16
Wet/Dry Vacuum
Household and Workshop Use
Series SS11, SS12, SS14, SS16
Aspiradora para aspiración de residuos
Líquidos/Sólidos
Para Uso Doméstico y Comercial
ATTENTION!
Read all safety rules carefully
before attempting to operate.
Retain for future reference.
¡ATENCIÓN!
Lea cuidadosamente todas
las normas de seguridad
antes de utilizar la aspira-
dora. Conserve esta man-
ual para consultas futuras.
¡PELIGRO!
Nunca opere esta unidad ante
la presencia de materiales o
vapores inflamables dado que
los artefactos eléctricos pro-
ducen arcos o chispas que
pueden causar un incendio o
una explosión.
¡NO DEJE LA ASPI-
RADORA FUNCIO-
NANDO SIN VIGI-
LANCIA!
DANGER!
Never operate this unit when
flammable materials or vapors
are present because electri-
cal devices produce arcs or
sparks that can cause a fire
or explosion.
NEVER OPERATE
UNATTENDED!
SHOP-VAC CORPORATION
2323 Reach Road, P.O. Box 3307
Williamsport, PA 17701-0307
(570) 326-3557
www.shopvac.com
SHOP-VAC CANADA
1770 Appleby Line
Burlington, Ontario L7L 5P8
(905) 335-9730
www.shopvac.ca
Shop Vac-México, S.A. de C.V.
Av. Mariano Otero #5095, Local 1 PB
Col. La Calma
Zapopan, Jalisco C.P. 45070
MÉXICO
52 (33) 3188 6388
Patents Issued and Pending.
Brevets délivrés et en instance.
Patentes registradas y en trámite.
© 2013 Shop-Vac Corporation. All Rights Reserved.
© Shop-Vac Corporation, 2013. Tous droits réservés.
© 2013 Shop-Vac Corporation. Todos los derechos reservados. 87548-19
Manuel d’utilisation
Veuillez lire avant d’utiliser l’aspirateur.
Séries SS11, SS12, SS14, SS16
Aspirateur pour déchets secs et humides
Pour Utilisation Domestique ou dans les Entrepôts
ATTENTION!
Lisez attentivement les in-
structions sur la sécurité
avant d’utiliser cet appareil.
Conservez ce manuel pour
vous y reporter ultérieurement.
DANGER!
N’utilisez jamais cet aspira-
teur en présence de vapeurs
ou de matières inflammables.
Les appareils électriques
produisent des arcs ou des
étincelles qui peuvent causer
un incendie ou une explosion.
NE JAMAIS FAIRE
FONCTIONNER SANS
SURVEILLANCE!
BRAND/MARQUE/MARCA
in sketches B and C may be used
to connect this plug to a 2-pole
receptacle as shown in sketch B
if a properly grounded outlet is not
available. The temporary adaptor
should be used only until a properly
grounded outlet ( can be sketch A)
installed by a qualified electrician.
The green colored rigid ear, lug or
the like extending from the adaptor
must be connected to a permanent
ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be
held in place by a metal screw.
IN CANADA, THE USE OF A TEMPORARY ADAPTOR IS NOT PERMITTED BY THE CANADIAN
ELECTRICAL CODE. Make sure that the appliance is connected to an outlet having the same
configuration as the plug. No adaptor should be used with this appliance.
This appliance must be grounded. If it should malfunction or break down, grounding provides
a path of least resistance for electric current to reduce the risk of electric shock. This appli-
ance is equipped with a cord having an equipment-grounding conductor and grounding plug.
The plug must be inserted into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING – IMPROPER CONNECTION OF THE EQUIP-
MENT-GROUNDING CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE PERSON IF
YOU ARE IN DOUBT AS TO WHETHER THE OUTLET IS PROPERLY GROUND-
ED. DO NOT MODIFY THE PLUG PROVIDED WITH THE APPLIANCE – IF IT
WILL NOT FIT THE OUTLET, HAVE A PROPER OUTLET INSTALLED BY A
QUALIFIED ELECTRICIAN.
This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks
like the plug illustrated in . A temporary adaptor that looks like the adaptor illustrated sketch A
GROUNDING INSTRUCTIONS
UNPACKING AND SET-UP
1. Pull lid latches in an outward motion, remove tank cover and any accessories that may have
been shipped in the tank.
2. Attach caster system following the instructions and illustrations in this manual.
3. Before replacing tank cover, please refer to Dry Pick Up or Wet Pick Up Operation in this
manual to ensure you have the proper filters installed for your cleaning operation.
4. Replace tank cover, and apply pressure with thumb to each latch until it snaps tightly in
place. Make sure all lid latches are clamped securely.
5.
Insert machine hose end into inlet of tank. Twist slightly to tighten the connection (Figure A).
When using the appliance at a distance where an extension cord becomes necessary, a 3-conductor
grounding cord of adequate size must be used for safety, and to prevent loss of power and overheating.
Use the table below to determine A.W.G. wire size required. To determine ampere rating of your vacuum,
refer to nameplate located on rear of motor cover. Before using appliance, inspect power cord for loose
or exposed wires and damaged insulation. Make any needed repairs or replacements before using
your appliance. Use only three-wire outdoor extension cords which have three-prong grounding-type
plugs and three-pole receptacles which accept the extension cord’s plug. When vacuuming liquids, be
sure the extension cord connection does not come in contact with the liquid.
NOTE: STATIC SHOCKS ARE COMMON IN DRY AREAS OR WHEN THE RELATIVE HUMIDITY OF THE AIR IS
LOW. THIS IS ONLY TEMPORARY AND DOES NOT AFFECT THE USE OF THE APPLIANCE. TO REDUCE THE
FREQUENCY OF STATIC SHOCKS IN YOUR HOME, THE BEST REMEDY IS TO ADD MOISTURE TO THE AIR
WITH A CONSOLE OR INSTALLED HUMIDIFIER.
EXTENSION CORDS
When using an electrical appliance, basic precautions should always be followed, including the
following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before
servicing. Connect to a properly grounded outlet only. See Grounding Instructions.
2. Do not expose to rain – store indoors.
3. Do not allow to be used as a toy. Close attention is necessary when used by or near chil-
dren.
4. Use only as described in this manual. Use only Manufacturer’s recommended attachments.
5. Do not use with damaged cord or plug. If appliance is not working as it should, has been
dropped, damaged, left outdoors or dropped into water, contact Shop-Vac Corporation for
assistance.
6. Do Not: pull or carry by cord, use cord as a handle, close a door on cord or pull cord around
sharp edges or corners. Do not run appliance over cord. Keep cord away from heated sur-
faces.
7. Do not unplug by pulling on cord. To unplug, grasp the plug: not the cord.
8. Do not handle plug or appliance with wet hands.
9. Do not put any object into openings. Do not use with any openings blocked; keep free of dust,
lint, hair and anything that may reduce air flow.
10. Keep hair, loose clothing, fingers and all parts of body away from openings and moving
parts.
11. Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot
ashes.
12. Do not use without dust bag and/or filters in place.
13. Turn off all controls before unplugging.
14. Use extra care when cleaning on stairs.
15. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where
they may be present.
16. Do not use your cleaner as a sprayer of flammable liquids such as oil base paints, lacquers,
household cleaners, etc.
17. Do not vacuum toxic, carcinogenic, combustible or other hazardous materials such as
asbestos, arsenic, barium, beryllium, lead, pesticides or other health endangering materials.
Specially designed units are available for these purposes.
18. Do not pick up soot, cement, plaster or drywall dust without cartridge filter and collection
filter bag in place. These are very fine particles that may pass through the foam and affect the
performance of the motor or be exhausted back into the air. Additional collection filter bags are
available.
19. Do not leave the cord lying on the floor once you have finished the cleaning job. It can become
a tripping hazard.
20. Use special care when emptying heavily loaded tanks.
21. To avoid spontaneous combustion, empty tank after each use.
22. The operation of a utility vac can result in foreign objects being blown into eyes, which can
result in eye damage. Always wear safety goggles when operating vacuum.
23. STAY ALERT. Watch what you are doing and use common sense. Do not use vacuum cleaner
when you are tired, distracted or under the influence of drugs, alcohol or medication causing
diminished control.
24. WARNING! Do NOT use this vacuum cleaner to vacuum lead paint debris because this may
disperse fine lead particles into the air. This vacuum cleaner is not intended for use under EPA
Regulation 40 CFR Part 745 for lead paint material cleanup.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING – DO NOT LEAVE VACUUM UNATTENDED WHEN IT IS PLUGGED IN AND/OR OPERATING. UNPLUG UNIT WHEN NOT IN USE.
Volts Total length of cord in feet
120V
Ampere Rating
More Not More
Than Than
0 - 6
6 - 10
10 - 12
12 - 16
25 50 100 150
AWG
18
18
16
14
16
16
16
12
16
14
14
14
12
12
Not ommendedrec
6. Attach the extension wands (not standard with all
models) to the accessory end of the hose. Twist
slightly to tighten the connection (Figure A).
7. Attach one of the cleaning accessories (depending on
your cleaning requirements) to the extension wands.
Twist slightly to tighten the connection (Figure A).
8. Plug the cord into the wall outlet. Your cleaner is ready for use.
I = ON, O =OFF
NOTE: MANY MORE USEFUL TOOLS ARE AVAILABLE AT YOUR LOCAL DEALER OR SHOP-VAC®
WEBSITE: WWW.SHOPVAC.COM (U.S.A.), WWW.SHOPVAC.CA (CANADA).
A
WARNING – ALWAYS DISCONNECT THE PLUG FROM
THE WALL OUTLET BEFORE REMOVING THE TANK COVER.
When using the reusable dry filter to pick up dust and dry
material, you must install foam sleeve and reusable dry
filter to ensure proper filtration. If the vacuum has been
used to pick up liquids, the foam sleeve must be cleaned
and dried before installing for dry pick up. With tank cover
in an upside down position, slide foam sleeve down over lid
cage pulling until foam sleeve completely covers lid cage
(Figures 38, 39). Center the reusable dry filter on lid cage
(Figure 40), slide mounting ring down over filter until ring is
positioned against the ribs of the lid cage (Figure 41). The
reusable dry filter should always be in position over the foam
sleeve for dry pick up. To remove the filter for cleaning, remove mounting ring
and filter from lid cage . To clean the reusable dry filter, shake off (Figure 42)
excess dirt and dust or (depending on the condition of the filter) rinse with water.
Allow the filter to dry completely and re-install. DO NOT MACHINE WASH OR DRY.
(Not standard with all models)
INSTALLING FOAM SLEEVE AND REUSABLE
DRY FILTER
42
38 39
41
40
Not all units are equipped with the same caster system. Follow the instruc-
tions, which apply to your specific unit.
Without Caster Feet
You will find four casters with your wet/dry vacuum. Assemble as follows:(Figure 1)
1. With cord disconnected from receptacle and tank cover removed, turn tank upside down so
that bottom is facing up.
2. Insert casters into bottom of tank by placing stem
of caster into holes provided. Apply pressure and
twisting motion until casters snap into place
(Figure 2).
3. Return tank to upright position.
CASTER SYSTEM ASSEMBLY
TOOL HOLDER
(Not standard with all models)
If your tool holder looks like the one pictured in , follow these instructions. Figure 32
1. With rear of unit facing you, take tool holder and position it with tabs facing rear of unit
(Figure 33).
2. Place “J” shaped tabs into the slots on cord wraps (Figure 34).
3. Press down until tabs snap into place.
4. Press down on center of tool holder until tab latches on bottom lid (Figure 35).
If your tool holder looks like the one pictured in , follow these instructions.Figure 36
1. With rear of unit facing you, take tool holder and slide over notches on rear of tank (Figure 37).
2
1
If your caster feet look like the ones pictured in Figure 12, follow these instructions.
You will find four caster feet , four casters and four screws with your (Figure 12) (Figure 13)
wet/dry vacuum. Assemble as follows:
1. With cord disconnected from receptacle and tank cover removed, turn tank upside down so
that bottom is facing up.
2. With front of tank facing you, take caster feet marked with the letter A and place (Figure 14)
in slots on left front and right rear of tank also marked with the letter A . Secure (Figure 15)
with screws provided (Figure 16).
3. Take caster feet marked with the letter B and place in slots on right front and (Figure 17)
left rear of tank also marked with the letter B . Secure with screws provided(Figure 18)
(Figure 19).
4. If flat washers are included in hardware package place flat washer over stem of caster before
installing casters into feet. Flat washers are not required with all units.NOTE:
5. Insert casters into feet by placing stem of caster into holes provided. Apply pressure and
twisting motion until casters snap into place . Return tank to upright position.(Figure 20)
With Caster Feet
If your caster feet look like the ones pictured in Figure 3, follow these instructions.
You will find four caster feet , four casters , and four screws with your (Figure 3) (Figure 4)
wet/dry vacuum. Assemble as follows:
1. With cord disconnected from receptacle and tank cover removed, turn tank upside down
so that bottom is facing up.
2. Remove any webbing that attaches the caster feet to each other.
3. With front of tank inlet facing you, take caster feet marked with the letter A (Figure 5) and
insert stem of caster foot into holes on left front and right rear of tank also marked with
letter A (Figure 6). Make sure caster feet are fully inserted into tank bottom and secure with
screws provided (Figure 7).
4. Take caster feet marked with the letter B and insert stem of caster foot into (Figure 8)
holes on right front and left rear of tank also marked with the letter B Make (Figure 9).
sure caster feet are fully inserted into tank bottom and secure with screws provided
(Figure 10).
5. Insert casters into feet by placing stem of caster into holes provided. Apply pressure and
twisting motion until casters snap into place (Figure 11).
6. Return tank to upright position.
With Rear Caster Dolly/Tool Holder
You will find four casters , two caster feet , rear caster dolly/tool holder (Figure 21) (Figure 22)
(Figure 23), and four screws with your wet/dry vacuum. Assemble as follows:
1. With cord disconnected from receptacle and tank cover removed, turn tank upside down so
that the bottom is facing up.
2. Take rear caster dolly and place into slots (on rear of tank, opposite of drain) and secure with
screws provided (Figure 24).
3. If flat washers are included in hardware package place flat washer over stem of caster before
installing casters into feet. Flat washers are not required with all units.NOTE :
4. Insert casters into bottom of rear caster dolly by placing stem of caster into holes provided.
Apply pressure and twisting motion until casters snap into place (Figure 25).
5. With tank drain facing you, take caster foot marked with the letter A and (Figure 26)
place in slot on left side of tank also marked with the letter A. Secure with screw provided
(Figure 27).
6. Take caster foot marked with the letter B and place in slot on right side of tank (Figure 28)
also marked with the letter B. Secure with screw provided (Figure 29).
7. Insert casters into feet by placing stem of casters into holes provided. Apply pressure and
twisting motion until casters snap into place (Figure 30).
8. Return tank to upright position.
9. Place tool basket with curved surface against tank on rear (not standard with all models)
caster dolly assembly (Figure 31).
21
22
23
A
A
A
B
AB
24
31
30
29
28
25
26
27
DRY PICK UP
B
A
A
A
A
A
A
B
B
BB
A
A
B
B
1312
17
14
18
15 16
19
20
33
34
32
37
35
36
(Not standard with all models)
NOTE: If foam sleeve is in position over lid cage, it must be removed before installing cartridge
filter.
INSTALLING THE CARTRIDGE FILTER
B
B
87
3
B
B
B
B
A
A
9
4
10
A
A
5
11
A
A
A
A
6
The cartridge filter can be used for wet or dry pick up;
installation is the same for both. When picking up large
quantities of liquid please refer to the Wet Pick Up Operation
section in this manual. Use the cartridge filter in posi-
tion over the lid cage for most general dry material pick
up. With the tank cover in an upside down position, slide
44
43

Product specificaties

Merk: Shop-Vac
Categorie: Stofzuiger
Model: 5985200

Heb je hulp nodig?

Als je hulp nodig hebt met Shop-Vac 5985200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Stofzuiger Shop-Vac

Shop-Vac

Shop-Vac SSP16 Handleiding

22 Juni 2023
Shop-Vac

Shop-Vac K250-C Handleiding

19 Juni 2023
Shop-Vac

Shop-Vac 92LSQ650 Handleiding

18 Juni 2023
Shop-Vac

Shop-Vac ESSSQ550 Handleiding

13 Juni 2023
Shop-Vac

Shop-Vac 9626510 Handleiding

12 Juni 2023
Shop-Vac

Shop-Vac 5985000 Handleiding

7 Juni 2023
Shop-Vac

Shop-Vac 92MSQ650 Handleiding

5 Juni 2023
Shop-Vac

Shop-Vac 5989500 Handleiding

2 Juni 2023
Shop-Vac

Shop-Vac 85S200 Handleiding

28 Mei 2023
Shop-Vac

Shop-Vac 5985200 Handleiding

23 Mei 2023

Handleiding Stofzuiger

Nieuwste handleidingen voor Stofzuiger

Philips

Philips PowerPro Duo FC6172 Handleiding

20 April 2024
Ecovacs

Ecovacs DEEBOT YEEDI Y1 PRO PLUS Handleiding

20 April 2024
Clever Clean

Clever Clean 970346 Handleiding

18 April 2024
Worx

Worx WX031.9 Handleiding

17 April 2024
Airflo

Airflo AFV30 Handleiding

17 April 2024
Electrolux

Electrolux SuperCyclone ZSC6930 Handleiding

17 April 2024
LG

LG CordZero A900BM Handleiding

17 April 2024
Di4

Di4 Aspirovac Compact Handleiding

15 April 2024
Di4

Di4 Aspirovac Silence 3.0 Handleiding

15 April 2024
Di4

Di4 Aspirovac Cyclone 1.5 Handleiding

15 April 2024