Shimano HP-NX10 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Shimano HP-NX10 (1 pagina's) in de categorie Fietsaccessoire. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
Before riding the bicycle, check that the ring is turned to the
“FREE” side (in the clockwise direction) as far as it will go and
that the red “ ” mark is aligned with the center of the frame.
When the ring is in this position, the handlebar should turn
smoothly.
If you try to ride the bicycle while the ring is turned to the
“STOP” position, it will not be possible to turn the handlebar in
the normal way, and a serious accident may result.
The handlebar will also not turn in the normal way while the
ring is set to somewhere between the “FREE” and “STOP”
positions. If you try to ride the bicycle with the ring in this
condition, a serious accident may result.
Never turn the ring to the “STOP”. position while riding, as this
will stop the handlebar from turning normally, which could
cause a serious accident.
Do not hang any luggage in the area of the handlebar while
riding, as there is the danger that the luggage might touch the
ring and move it away from the “FREE” position and toward
the “STOP” position.
Avoid putting a child’s seat forward of the bicycle seat, as the
child might accidentally touch the ring while sitting in this seat.
Do not leave the bicycle alone while a child is sitting in the
child’s seat otherwise the bicycle may fall over and serious
injury to the child may result.
Make sure you fully understand how the ring operates before
you ride the bicycle. If you have any questions regarding
operation, please contact your nearest bicycle shop.
SERVICE INSTRUCTIONS SI-9470A
HP-NX10 Handlebar stopper
METHOD OF USE
Moving the ring to “STOP” when parking the bicycle
STOP
FREE
Check that the
handlebar turns
smoothly.
Turn the ring clockwise
as far as it will go.
Moving the ring to “FREE” before riding the bicycle
Please note: Specifi cations are subject to change for improvement without notice. (English)
© Aug. 2009 by Shimano Inc. XBC. SZK. Printed in Japan
Before use, read these instructions carefully, and follow them for correct use.
The handlebar stopper is activated by turning the ring to the “STOP”
position (counterclockwise). In this condition, the handlebar will turn if
you force it to turn, but it will make a cracking sound. Never ride the
bicycle in this condition, as it is extremely dangerous.
The handlebar can be unlocked by turning the ring to the “FREE” position
(clockwise). Check that the red “ ” mark is aligned with the center of the
frame and that the handlebar turns smoothly before riding the bicycle.
These service instructions
explain how to use and maintain
the Shimano bicycle parts which
have been used on your new
bicycle. For any questions
regarding your bicycle or other
matters which are not related to
Shimano parts please contact
the place of purchase or the
bicycle manufacturer.
If the handlebar still moves after the
ring has been turned
counterclockwise, turn the ring again
while moving the handlebar slightly
until it locks.
Ring
Center of frame
Red “ ” mark on ring
2
1
WARNING


Product specificaties

Merk: Shimano
Categorie: Fietsaccessoire
Model: HP-NX10

Heb je hulp nodig?

Als je hulp nodig hebt met Shimano HP-NX10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fietsaccessoire Shimano

Handleiding Fietsaccessoire

Nieuwste handleidingen voor Fietsaccessoire