Shimano BR-R650 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Shimano BR-R650 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
=
A B
1
2
11
2
2
=
A B
4
3
43
4
3
R55C2
R
FORWARD
R55C2
FORWARD
L
A A
+ = 3 -- 4 mm
A B
+ = 3 -- 4 mm
A B
Remove the xing bolt.
• Cutthecableatthelengthatwhichitisnotpulledtight
whenthehandlebaristurnedallthewaytotheleftand
right.
• Ifasqueakingnoiseoccursafteralongperiodofuse,
lubricatetheparts.
Technical Service Instructions
Inordertorealizethebestperformance,werecommendthatthe
followingcombinationbeused.
Brakelever
CaliperBrake
Brakecable
Installation of the brake lever
Installation of the brake
Replacement of the cartridge shoe
1.
5mmAllenkey
Wheninstallingthecomponentstocarbonframe/handlebarsurfaces,
verifywiththemanufacturerofthecarbonframe/partsfortheir
recommendationontighteningtorqueinordertopreventovertightening
thatcancausedamagetothecarbonmaterialand/orundertightening
thatcancauselackofxingstrengthforthecomponents.
2.
Cablehook Innercableend
Outercasing
Outercasing
Innercableend
Installationbolt
Cablehook
A
Tape
Outercasing
Afteradjustingthebrakeshoepositionsothattheshoe
surfaceandtherimsurfaceareasshownintheillustration,
tightentheshoexingbolt.
Depressthebrakeleverabout10timesasfarasthegripand
checkthateverythingisoperatingcorrectlyandthattheshoe
clearanceiscorrectbeforeusingthebrakes.
Direction of
rim rotation
Direction of
rim rotation
Toe-in
0.5 mm
Note:
Note:
TheBR-R650allowstheangleofcontactbetweenthe
shoeandtherim(toe-in)tobeadjusted.Adjustingthe
toe-inmakesitpossibletoobtainsmootherbraking
operation.
1 mm or more
Shoe xing bolt
4mmAllenkey
3.
Open
Closed
Quickrelease
lever
Cableadjustmentbolt
Shoe
insertion
direction
Shoeholder Shoeholder
Shoe Shoe
Front Front
Sameatfrontandrear
For the left
Sameatfrontandrear
For the right
Shoe
Depress about
10 times
BR-R650 CaliperBrake
ST-6600/ST-5600
Theusualpositionduring
installationiswhenthehead
ofthecenteringadjustment
boltisasshowninthe
illustration.
Centeringadjustmentbolt
Fixing bolt
2mmAllenkey
5mmAllenkey
Fixing bolt Fixing bolt
BR-R650
Temporarilysecuretheoutercasingtothehandlebar(by
usingtapeorsimilarmaterial).
SI-8F60A-002
Tightening torque:
6 – 8 N·m
{52 – 69 in. lbs.}
Tightening torque:
8 – 10 N·m {69 – 87 in. lbs.}
Tightening torque:
5 – 7 N·m {43 – 61 in. lbs.}
Cable bolt tightening torque:
6 – 8 N·m {52 – 69 in. lbs.}
Tightening torque:
1 – 1.5 N·m {9 – 13 in. lbs.}
2. 6.
Brake shoe setting position Check
4.
Thenwrapthehandlebarwithhandlebartape.
Compressthearch,andsetwhiletheshoeisinrmcontact
withtherim
1.
Installation of the brake itself
Turnthecableadjustmentbolttoreadjusttheshoeclearance.
Makeaminoradjustmentbyusingthecenteringadjustment
bolt.
Setthequickreleaselevertotheclosedposition;thenadjust
theshoeclearance(asshownintheillustrationbelow)and
securethecable.
5.
4.
3.
Readjustment of the shoe clearance
Centering of the brake shoe
Cable connection
1.
4.
2.
3.
Tighten the xing bolt.
Removetheshoebyslidingitalongthegrooveoftheshoe
holder.
Therearetwodifferenttypesofshoeandshoeholdertobe
usedintheleftandrightpositionsrespectively.Slidethenew
shoesintothegroovesontheshoeholderswhiletakingnote
ofthecorrectdirectionsandboltholepositions.
3mmAllenkey
• Improperuseofyourbicycle'sbrakesystemmayresultina
lossofcontroloranaccident,whichcouldleadtoasevere
injury.Becauseeachbicyclemayhandledifferently,besureto
learntheproperbrakingtechnique(includingbrakelever
pressureandbicyclecontrolcharacteristics)foryourbicycle.
 Consultyourbicycledealerandthebicycle'sownersmanual,
andpracticeyourridingandbrakingtechnique.
• Ifthefrontbrakeisappliedtoostrongly,thewheelmaylock
andthebicyclemayfallforward,andseriousinjurymayresult.
• Securelytightenthecaliperbrakemountingnutstothe
speciedtighteningtorque.
•Uselocknutswithnyloninserts(self-lockingnuts)fornut-
typebrakes.
•Forsunkennuttypebrakes,usesunkennutsofthe
appropriatelengthwhichcanbeturnedsixtimesormore;
whenre-installing,applysealant(lockingadhesive)tothe
nutthreads.
 Ifthenutsbecomelooseandthebrakesfalloff,theymayget
caughtupinthebicycleandthebicyclemayfallover.
 Particularlyifthishappenswiththefrontwheel,thebicycle
maybethrownforwardandseriousinjurycouldresult.
• Brakesdesignedforuseasrearbrakesshouldnotbeusedas
frontbrakes.
• Obtain and read the service instructions carefully prior to
installing the parts.Loose,wornordamagedpartsmaycause
thebicycletofalloverandseriousinjurymayoccurasaresult.
WestronglyrecommendonlyusinggenuineShimano
replacementparts.
• Becarefulnottoallowanyoilorgreasetogetontothebrake
shoes.Ifanyoilorgreasedogetontheshoes,youshould
replacetheshoes,otherwisethebrakesmaynotwork
correctly.
• Checkthebrakecableforrustandfraying,andreplacethe
cableimmediatelyifanysuchproblemsarefound.Ifthisisnot
done,thebrakesmaynotworkcorrectly.
• Alwaysmakesurethatthefrontandrearbrakesareworking
correctlybeforeyouridethebicycle.
• Therequiredbrakingdistancewillbelongerduringwet
weather.
 Reduceyourspeedandapplythebrakesearlyandgently.
• Iftheroadsurfaceiswet,thetireswillskidmoreeasily.Ifthe
tiresskid,youmayfalloffthebicycle.Toavoidthis,reduce
yourspeedandapplythebrakesearlyandgently.
• ReadtheseTechnicalServiceInstructionscarefully,andkeep
theminasafeplaceforlaterreference.
General Safety Information
WARNING
NOTE:
• IfusingSHIMANO'sroadbrakeshoesincombinationwith
ceramicrims,thebrakeshoeswillwearmorequicklythan
normal.
• Ifthebrakeshoeshaveworndownuntilthegroovesareno
longervisible,theyshouldbereplaced.
• Differentbrakeshoeshavetheirowncharacteristics.Askthe
placeofpurchasefordetailswhenpurchasingthebrakeshoes.
• Partsarenotguaranteedagainstnaturalwearordeterioration
resultingfromnormaluse.
• FormaximumperformancewehighlyrecommendShimano
lubricantsandmaintenanceproducts.
• Foranyquestionsregardingmethodsofhandlingor
maintenance,pleasecontacttheplaceofpurchase.
−Toavoidseriousinjuries:
SI-8F60A-002-00
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
*ServiceInstructionsinfurtherlanguagesare
availableat:http://techdocs.shimano.com
Pleasenote:specificationsaresubjecttochangeforimprovementwithout
notice.(English)
©Nov.2010byShimanoInc.XBCIZMPrintedinMalaysia.


Product specificaties

Merk: Shimano
Categorie: Niet gecategoriseerd
Model: BR-R650

Heb je hulp nodig?

Als je hulp nodig hebt met Shimano BR-R650 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Shimano

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd