Sharp PN-ZL02A Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Sharp PN-ZL02A (10 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 109 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
• Thank you for purchasing a SHARP product.
Before using the product, please be sure to read this operation manual carefully. Before using the product, be sure to read and understand the
“SAFETY PRECAUTIONS” in the operation manual of the LCD MONITOR. After reading the manual, keep it in a convenient location where it
can be accessed at any time.
As for how to use the product, refer to the manual of the LCD MONITOR.
TIPS
- This product was shipped after strict quality control and inspection; however, if breakage or a malfunction should be found, contact your
SHARP dealer or your nearest customer contact.
- Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a third party, nor for
any other malfunctions or damage to this product arising during use, except where indemnity liability is recognized under law.
- This product and its accessories may be upgraded without advance notice.
Operation Manual
TOUCH PEN
Applicable models
(as of August 2017)
LCD MONITOR
PN-60TB3/PN-60TW3A/PN-70TB3/PN-70TW3A/
PN-L603B/PN-L603WA/PN-L703B/PN-L703WA
(Available models differ according to region.)
CAN ICES-3 (A) / NMB-3 (A)
IMPORTANT:
To aid reporting in case of loss or theft, please record the
product’s model and serial numbers in the space provided.
The numbers are located in the rear of the product.
Model No.:
Serial No.:
U.S.A. ONLY
WARNING:
FCC Regulations state that any unauthorized changes or modiî‚ż cations to this equipment not expressly approved by the
manufacturer could void the user’s authority to operate this equipment.
NOTE:
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
FCC CAUTION
Changes or modi cations not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
U.S.A. ONLY
This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this device.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC
radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has
very low levels of RF energy that are deemed to comply without testing of speciî‚ż c absorption ratio (SAR).
U.S.A. AND
CANADA ONLY
PN-ZL01A
PN-ZL02A
CINSE1459MP51(1)
Supplied Components
Speciî‚żcations
Model PN-ZL01A/PN-ZL02A
Wireless communication method 2.4 GHz, Bluetooth Low Energy, FHSS method
As a part of our policy of continuous improvement, SHARP reserves the right to make design and speciî‚żcation changes for product improvement
without prior notice. The performance speciî‚żcation î‚żgures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
Printed in China
17J CN1
If any component should be missing, please contact your dealer.
â–ˇ Pen tip: 2 â–ˇ Touch pen (PN-ZL02A): 1
□ Touch pen battery (LR-03 (“AAA” size)): 1
â–ˇ Operation manual (this manual): 1
PN-ZL01A only
PN-ZL02A only
â–ˇ ID labels: 4 x 2
â–ˇ Touch pen adapter (PN-ZL05): 1
â–ˇ Touch pen adapter screw
(step screw M3): 1
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
* Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your
clothing. In order to avoid these problems, make sure to observe the precautions below:
• Use the specied batteries only.
• Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the compartment.
WARNING:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may
be required to take adequate measures.


Product specificaties

Merk: Sharp
Categorie: Niet gecategoriseerd
Model: PN-ZL02A
Kleur van het product: Black, Stainless steel
Bluetooth: Ja
Certificering: CE
Vorm: Cylinder
Netwerkstandaard: IEEE 802.15.4
Merkcompatibiliteit: Sharp
Compatibiliteit: PN-60TB3, PN-60TW3A, PN-70TB3, PN-70TW3A, PN-L603B, PN-L603WA, PN-L703B, PN-L703WA
Type batterij: AAA

Heb je hulp nodig?

Als je hulp nodig hebt met Sharp PN-ZL02A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Sharp

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd