Sharp GX-BT3 Handleiding

Sharp Cradle/docking station GX-BT3

Lees hieronder de 📖 handleiding in het Nederlandse voor Sharp GX-BT3 (7 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7

MODEL

GX-BT3

WIRELESS BLUETOOTH® SPEAKER SYSTEM

This Quick Start Guide will help you to correctly install and operate your system.

If you require any advice or assistance

regarding your Sharp product, please visit

our web-site www.sharp.co.uk/support

Customers without internet access may

telephone 0845 880 0512 during office

hours (or (01) 676 0648 if telephoning from

Ireland).

1 Accessories

MUTE

ON/

S TAND-BY

TREBLE

AUDIO IN

BASS

PAIR IN G

VOL

X-BASS

BLUETOOTH

DIMMER

RRMCGA342AWSA

ECO MODE

GX-BT3

Remote control x 1 NFC tag x 2 Velcro tape

(hook type) x 2

Velcro tape

(loop type) x 3

3 Before using remote control

Before using the remote control, remove

the plastic shield from the battery holder.

Remote control Plastic shield

Battery holder

13J R KI 1

TINSEA457AWZZ

*TINSEA457AWZZLA*|

2 Power source

Wall socket

AC 100 - 240 V ~

50/60 Hz

4 Turn on your system

Press the ON/STAND-BY button to turn the

power on.

MUTE

ON/

STAND-BY

TREBLE

AUDIO IN

BASS

PAIRING

VOL

X-BASS

BLUETOOTH

DIM ME R

RRMCGA343AWSA

ECO M ODE

GX- BT 3

ON/

STAND-BY

GX-BT3_QG.indd 1

GX-BT3_QG.indd 1GX-BT3_QG.indd 1 2013-0

2013-0

2013-0 -17 0

-17 0

-17 0 :04:23

:04:23

92013-0 -17 0 :04:239 9

5 Bluetooth one touch connection via NFC

This audio system supports NFC-enabled device with Android

4.1, Jelly Bean and higher.

NFC tag set up■

The NFC tags can be placed anywhere convenient to you.

The velcro tapes supplied will help to secure the tags onto

the desired location.

Caution:

Make sure that the NFC tag is placed on a ﬂ at and level

surface.

If you choose not to use the velcro tape, do not place

the NFC tag near metal surface to avoid connection

interference during tagging.

Keep all small parts away from children as they may be

accidentally swallowed.

Peel the separator off the velcro tape (loop type) and

stick it on a desired surface.

Separator

Velcro

tape

(loop type)

Peel the separator off the velcro tape (hook type) and stick it to the

rear of the NFC tag. Then place the tag onto the desired location.

Separator

rear view of the NFC tag

Velcro tape

(hook type)

●

NFC connection for audio playback■

Check that:

Your device (smartphone/tablet) has an NFC function.

NFC function on your device is enabled.

Screen lock function of the device is off.

This unit is not in Eco mode.

Your device must be within 10 metres from the unit.

Touch your device

to the supplied NFC tag.

A pop-up window asking whether to proceed with the Bluetooth

connection appears on the device. Select <YES>.

The ‘connected’ message appears when the connection is

complete.

Playback will start automatically, otherwise press play (on re-

mote control or source device).

Sound will be heard from the speakers of this unit via audio

streaming.

Your device must be within 10 metres from the unit.

Various operation buttons (remote control only)Bluetooth

Press the button to play or pause.

Press the button to skip up.

Press and hold to fast forward.

Press the button to skip down.

Press and hold to fast reverse.

Notes:

To disconnect, simply touch your device to the tag again.

Regardless of which tag you used to establish Bluetooth

connection with this product, tapping your device to any

of the NFC tags again, will disconnect the con-Bluetooth

nection.

To listen to audio via Bluetooth connectivity without NFC

tag - refer “Pairing with other Bluetooth source devices”

on page 7.

It takes about 6-8 seconds for a Bluetooth enabled device

(eg. smartphone) to establish Bluetooth connection with

this unit via NFC or manual connection.

●

3

●

NFC tag

6 Listening to enabled devicesBluetooth

MU TE

ON/

STAN D-BY

TR EBLE

AUDI O IN

BASS

PAIRIN G

VOL

X-BASS

BLUET OOTH

DIMM ER

RRM CGA343AWSA

ECO MODE

PAIRING

BLUETOOTH

GX- BT 3

Pairing with other source devicesBluetooth

■

Press the ON/STAND-BY button to turn the power on.1

Press the BLUETOOTH button on the remote control or

FUNCTION button repeatedly on the main unit to select

Bluetooth function. (Pairing indicator blinks.)

Press and hold the PAIRING button for 3 seconds or more.

PAIRING indicator blinks quickly. The unit is now in pair-

ing mode and is ready to be paired with other Bluetooth

source device.

Perform pairing procedure on the source device to detect this

unit. “SHARP GX-BT3” will appear in the detected devices

list (if available) in the source device. (Refer the source device

operating manual for details).

Notes:

Place the devices to be paired within 1 metre (3 feet) of

each other when pairing.

Some source devices are unable to display lists of detect-

ed devices. To pair this unit with the source device, refer to

the source device operating manual for details.

●

Select “SHARP GX-BT3” from the source list. If Passcode* is

required, enter “0000”.

* Passcode may be called PIN Code, Passkey, PIN number

or Password.

Pairing indicator (blue) will stop blinking once the unit is suc-

cessfully paired with the source device. (Pairing information

is now memorised in the unit.)

Some audio source devices may connect with the unit au-

tomatically after pairing is completed, otherwise follow the

instructions in the source device operating manual to start

connection.

Press the play button on remote control or source device to

start streaming playback.Bluetooth

GX-BT3_QG.indd 2

GX-BT3_QG.indd 2GX-BT3_QG.indd 2 2013-0

2013-0

2013-0 -17 0

-17 0

-17 0 :04:25

:04:25

92013-0 -17 0 :04:259 9

Product specificaties

Merk:	Sharp
Categorie:	Cradle/docking station
Model:	GX-BT3
Kleur van het product:	Zwart
Gewicht:	2280 g
Breedte:	470 mm
Diepte:	172 mm
Hoogte:	172 mm
LED-indicatoren:	Ja
AC-adapterfrequentie:	50/60 Hz
AC-adapter ingangsspanning:	100 - 240 V
Bluetooth:	Ja
Near Field Communication (NFC):	Ja
Connectiviteitstechnologie:	Bedraad en draadloos
Type stroombron:	AC
Snelstartgids:	Ja
Gemiddeld vermogen:	20 W
Stroomverbruik (in standby):	0.4 W
Aantal luidsprekers:	2
Equalizer-instellingen:	Ja
Aanbevolen gebruik:	Universeel
Impedantie:	- Ohm
3,5mm-connector:	Ja
Gemiddeld vermogen subwoofer:	10 W
Audio-uitgangskanalen:	2.1 kanalen
Aantal drivers:	2
Frequentiebereik:	- Hz
AUX ingang:	Ja
Luidspreker soort:	2-weg
Meegeleverde subwoofer:	Ja
RMS-vermogen luidsprekers:	10 W
Afstandsbediening inbegrepen:	Ja
Productontwerp:	Soundbar
Regeling van bass-niveau:	Ja
Type product:	2.1 draagbaar luidsprekersysteem
Bass-optimalisatie:	Ja