Seville Classics Mesh Utility Shoe Rack 3 Tier Handleiding

Seville Classics Niet gecategoriseerd Mesh Utility Shoe Rack 3 Tier

Lees hieronder de 📖 handleiding in het Nederlandse voor Seville Classics Mesh Utility Shoe Rack 3 Tier (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

STEPS TO STACK THE RACK

1. Build another rack following the instructions above.

However, do not install the LEVELING FEET (B) on the second

(top) unit.

______________________________________________________

2. Screw the STACKING PINS (G) into the legs of the top unit.

Remove all CAPS (C) from the original (base) unit.

______________________________________________________

3. Lift the top unit up and onto the base unit, lining up the pins

with the holes at the four top corners so that they can be

inserted into each other. Be sure everything is in alignment and

then press down firmly on the top unit so that it sits tightly into

and onto the base unit.

WEIGHT CAPACITY PER SHELF: 13 6 kg/ 30 lb .

ASSEMBLY INSTRUCTIONS

3-TIER ADJUSTABLE SHOE RACK (Model No. 1 ) 5890

www.sevilleclassics.com

NOTE: Drawing shows 2 units

stacked vertically. Do not exceed

maximum height of 2 stacked units.

WARNING: Do not sit on the rack. Do

not drop heavy items on the rack.

Place heavier items on the lower

shelves and lighter ones on the top

shelves. Do not move the rack while

loaded.

TF150617

Important: Retain for future reference, read carefully.

A 2x

B 4x

C 4x

D 3x

E 12x

F 1x

G 4x

Please make sure you have all the parts before assembly

STEPS TO ASSEMBLE THE RACK

Unpack and remove all parts from the box. If there are missing or broken parts, please

contact our CUSTOMER SERVICE.

Made in China

1. Screw the LEVELING FEET (B) into the legs of each

SIDE FRAME (A). Insert the CAPS (C) into the top holes

of each side frame.

_______________________________________________________

2. Using four SCREWS (E) and the HEX KEY (F) loosely secure

the bottom SHELF (D) to each side frame. Once all the screws are

in place, tighten down all the screws.

Note: The counter sink holes should face outward so the screw

head will be flat when tightened.

Tip: The shelf can be assembled tilted or flat. Rotate shelf 180

degrees before installation to adjust the position.

_____________________________________________________

3. Once all shelves are securely in place, adjust the leveling feet

by screwing them in or out to obtain a level rack.

Product specificaties

Merk:	Seville Classics
Categorie:	Niet gecategoriseerd
Model:	Mesh Utility Shoe Rack 3 Tier
Kleur van het product:	Zilver
Gewicht:	3175 g
Breedte:	673 mm
Diepte:	307 mm
Hoogte:	485 mm
Soort:	Open
Aantal schappen:	4 schappen
Materiaal:	Metaal
Spiegel:	Nee