Sennheiser MEB 114 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sennheiser MEB 114 (4 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
PRODUCT SPECIFICATION
SpeechLine Wired
MEB 114 (-S) - Boundary Microphone
1/4
FEATURES
• Award winning design
• Optimized for speech
• Sturdy housing
• Made in Germany
The sturdy on-table boundary layer microphone MEB 114
constitutes an improvement for any conferencing system.
In its -S version it additionally features a programmable
microphone button (PTT, PTM, toggle on/off, permanent
on), and a bi-color LED ring for status indication.
A camera or media control system can be triggered via
the TTL logic out on the bottom side. Thanks to its rugged
housing and its high-quality microphone capsule the MEB
114 ensures the best speech intelligibility.
DELIVERY INCLUDES
• Boundary microphone
• Quick guide
• Safety guide
• Microphone cable (3 m )
ARCHITECT‘S SPECIFICATION
The microphone shall be a cardioid pre-polarized conden-
ser on-table boundary layer microphone designed for use
in conference applications. The high-quality microphone
capsule shall be optimized for speech intelligibility. The
frequency response shall be 40 Hz - 20,000 Hz and sensi-
tivity shall be 10 mV/Pa. Nominal impedance at 1 kHz shall
be 200 Ω. Equivalent noise level shall be 26 dB(A) or 39 dB
weighted as per CCIR 468-3. Dynamic range shall be
111 dB (A). Maximum SPL shall be 140 dB.
The microphone shall provide a tiny 3-pin XLR. The
microphone shall operate on 48 V phantom power. Current
consumption shall be 1.5 mA. The microphone shall have
a rugged housing; dimensions shall be 85 x 100 x 25 mm
(3.35“ x 3.94“ x 0.98“). Weight shall be 291 grams (10.27
oz). Operating temperature shall range from -10 °C to +50
°C (+14 °F to +122 °F).
The microphone shall be the Sennheiser MEB 114.
The Sennheiser MEB 114 microphone shall also be avai-
lable as a variant (-S) with a programmable microphone
button (Toggle on/off, PTM, PTT and permanent on) and
a bi-color LED ring for status indication. The current
consumption of the -S version shall be 5.3 mA.
The microphone shall provide a TTL logic connector with
logic inputs and outputs. The logic output voltage shall be
high level > 2.4 and low level < 0.4 V, the logic input volta-
ge shall be high level > 2.0 V and low level < 0.8 V.
The microphone shall be the Sennheiser MEB 114-S.
MEB 114 MEB 114-S
PRODUCT SPECIFICATION
SpeechLine Wired
MEB 114 (-S) - Boundary Microphone
2/4
SPECIFICATIONS
MEB 114 MEB 114-S
Transducer principle pre-polarized condenser microphone pre-polarized condenser microphone
Acoustic principle boundary layer microphone boundary layer microphone
Pick-up pattern cardioid cardioid
Frequency response 40 Hz – 20 kHz 40 Hz bis 20 kHz
Nominal impedance at 1 kHz 200 Ohm 200 Ohm
Sensitivity 10 mV/Pa 10 mV/Pa
Maximum sound pressure level 140 dB 140 dB
Equivalent noise level 29 dB (A) 29 dB (A)
Equivalent noise level weighted
as per CCIR 468-3
39 dB (CCIR) 39 dB (CCIR)
Dynamic range 111 dB (A) 111 dB (A)
Phantom power P 24-48 P 24-48
Current consumption 1.5 mA 5.3 mA
Connector tiny XLR 3 Mic: tiny XLR 3
Logic: clip contact
Pin assignment 1 = gnd
2 = Audio +
3 = Audio -
1 = gnd
2 = Audio +
3 = Audio -
Logic connector trigger signal at the logic connector:
Logic in (LED control)
GND
Logic out (switch signal)
Logic out high level output voltage > 2.4 V
low level output voltage > 0.4 V
Logic in high level input voltage > 2.0 V
low level input voltage > 0.8 V
LED light ring color red / green
Microphone modes Toggle on/off
Push to mute
Push to talk
permanent on (external LED control)
Weight 291 g 291 g
Dimensions (WxDxH) 85 x 100 x 25 mm
(3.35“ x 3.94“ x 0.98“)
85 x 100 x 25 mm
(3.35“ x 3.94“ x 0.98“)
Operating temperature -10 °C to +50 °C
(+14° F to +122° F)
-10 °C to +50 °C
(+14° F to +122° F)
PRODUCT SPECIFICATION
SpeechLine Wired
MEB 114 (-S) - Boundary Microphone
3/4
PRODUCT VARIANTS
MEB 114 B black Art. No. 505612
MEB 114 W white Art. No. 505613
MEB 114-S black Art. No. 505615
MEB 114-S W white Art. No. 505616
POLAR PATTERN
0°
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
250 Hz
125 Hz
1000 Hz
500 Hz
4000 Hz
2000 Hz
16000 Hz
8000 Hz
MEB 114
MEB 114-S
FREQUENCY RESPONSE


Product specificaties

Merk: Sennheiser
Categorie: Microfoon
Model: MEB 114

Heb je hulp nodig?

Als je hulp nodig hebt met Sennheiser MEB 114 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon Sennheiser

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon