Sennheiser HDA 200 Handleiding

Sennheiser Hoofdtelefoon HDA 200

Lees hieronder de 📖 handleiding in het Nederlandse voor Sennheiser HDA 200 (1 pagina's) in de categorie Hoofdtelefoon. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

HDA 200 Audiometric Headphone

Closed dynamic headphones designed for extended high frequency testing.

Features

♦Excellent passive attenuation (based on Peltor TM Ear Defenders)

♦Very high quality sound reproduction

♦Convenient single sided cable

♦Padded headband and additional adjustable/removable cushions for increased comfort

♦Soft, replaceable circumaural ear pads

♦Color coded ear cups, right (red) left (blue)

Technical Data

Frequency response 20 to 20,000 Hz< >

PTB calibrated see table

Transducer principle dynamic, closed

Nominal impedance 40 Ohm

Characterisitic SPL 100 dB at 1 kHz, 1 mW

Max permanent load 500 mW

Couplin circumaurag l

Caliper pressure 10 N

Weight (with cable) 330 g

Cable approx. 3 m, single-sided, open-ended

Connectio yellon w + L

black – L

red + R

white – R

Standard L Pa e Ma um SPLSP ssiv xim

frequencies (dB 20 Pa attenuation (<10 min. @µ)

(Hz) @ .5 Vrms (dB) 5 V RMS)

Sennheiser Electronic Corporation One Enterprise Drive PO Box 987, Old Lyme, C 0637T 1

Tel: 860-434-9190 Fax: 860-434-1759 Web site: www.sennheiserusa.com

HDA200 is PTB approved. Physikalisch-Technische

Bundesanstalt, Braunschweig, Germany. PTB is equivalent to

the National Bureau of Standards.

125 112.5 14.3 132 3±

250 113.0 15.9 132 3±

500 112.0 22.5 132 3±

750 1.0 - 131 311 ±

1,000 108.5 28.6 129 3±

2,000 104.0 124 -± 3

3,000 104.0 124 332.0 ±

4,000 104.0 45.7 124 3±

5,000 106.5 - 127 ± 3

6,000 107.5 - 125 ± 3

8,000 105.5 43.8 125 5±

9,000 105.0 - 123 ± 5

10,000 102.5 - 122 ± 5

11,200 102.0 - 123 ± 5

12,500 103.0 - 118 5±

14,000 98.5 - 119 5±

16,000 100.0 - 120 ± 5

• All measurements are done on a calibrated coupler

B&K 4153 (artificial ear) with the standard cone

YJ0304 above the adapter plate, type DB 0843.

• The pressure of the headband shall be 10N ± 1N.

• The RMS input voltage to the headphone is 0.5 V.

• The measurements are done with steady state sine

wave signals.

• The output impedance of the signal source shall be

<1 Ohm.

• Climatic conditions:

Tem rature 20pe T= º C

Humidit H=50%rey l

Atmospheric pressure P=approx. 100kPa

All data are influenced by temperature, humidity and static pressure.

HDA 200 Frequency Response Test Conditions

32.0

Product specificaties

Merk:	Sennheiser
Categorie:	Hoofdtelefoon
Model:	HDA 200
Kleur van het product:	Zwart
Gewicht:	330 g
Snoerlengte:	3 m
Connectiviteitstechnologie:	Bedraad
Headset type:	Stereofonisch
Impedantie:	40 Ohm
Frequentiebereik koptelefoon:	20 - 20000 Hz
Gevoeligheid koptelefoon:	100 dB
Driver type:	Dynamisch
Type product:	Headset