Sennheiser EM 203 MF Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sennheiser EM 203 MF (40 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 104 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/40
Instructions for use
EM 203
DIVERSIT Y
AB
MENU
%uV
Y
N
SET
ESC
DEV RF
EM 10 46 RX
150
100
75
50
25
10
0
1000
300
100
30
10
0
B
MENU
uV Y
N
SET
ESC
EM 1046 RX
1000
300
100
30
10
0
DIVERS ITY
AB
MENU
%uV
Y
N
SET
ESC
DEV RF
EM 1046 RX
150
100
75
50
25
10
0
1000
300
100
30
10
0
POWER
REMOT E
LEVEL
+ 5V
+ 12V
- 12V
DC - A
DC - B
OL - A
OL - B
+ 20
dB
+ 12 dB u
0
MANIPULATION FUNCTION DISPLAY (RX)
2
CONTENTS
1 TECHNICAL OVERVIEW
1.1 Computer Control
1.2 Diversity
1.3 HIDYN plus® noise reduction system
1.4 Block diagrams
2 POSSIBLE TRANSMITTER/RECEIVER COMBINATIONS
2.1 EM 203 receiver/SK 2012 TV(HiDyn plus
®) and SKM 4031 HiDyn plus
®
2.2 EM 203 receiver/SK 50/250 UHF and SKM 5000 (HiDyn plus
®)
2.3 EM 203 receiver/SER 20 transceivers
3 PUTTING THE EM 203 TO WORK
3.1 Mains connection
3.2 Antenna connection
3.3 AF connection
3.4 Start-up procedure/operating indicators
4 AVAILABLE MODULES
4.1 EM 1046 RX RECEIVER MODULE
4.1.1 Adjustment
4.1.2 Receiver frequencies
4.1.3 Squelch
4.1.4 Selection RF signal/deviation/battery condition
4.1.5 Display-text/frequency/battery condition
4.1.6 Entry of brief text
4.1.7 System configurations and specifications
4.1.8 Remote monitoring of transmitter battery
4.1.9 Monitoring of audio signals
4.1.10 Stand-by
4.2 MONITOR
4.2.1 LED indicators
4.2.2 Monitor headphones
5TECHNICAL DATA
MANIPULATION FUNCTION DISPLAY (RX)
3
INTRODUCTION
The wireless Mikroport multi-channel sound transmission system EM
1046 is a transmitter/receiver system in a modular design. It offers
comfortable handling and can be relied on for dependable service.
• 3-channel diversity receiver EM 203 with microprocessor-controlled
receiver modules
• Ultimate flexibility in the selection of transmitter and receiver
frequencies thanks to easy-to-replace PROMs and EEPROMs.
The present manual shall help you to get acquainted with the EM 203
receiver.
• The chapter " " helps you to connect theSTART-UP PROCEDURE
unit to the mains and to put it to work.
• The chapter " " provides you withAVAILABLE MODULES
information on every single module. It explains how to adjust them
to satisfy your individual transmission requirements.
The necessary modules for this receiver system are incorporated into a
"Mainframe". For programming and servicing, the EM 1046 RX
receiver modules can be removed to the front. Output module, input
module and mains power supply module, however, are integral parts of
the system.
IMPORTANT INFORMATION
Each HF input is supplied with a wideband power distributor 1:3,
which intendedly does not affect the adjustment possibilities of the
EM 1046 RX receiver modules. In order to achieve sufficient sensitivity
and protection against subscriber's extention stations, an antenna with
booster and pre-selection is required. In general, Sennheiser's
AB 1036 TV antenna booster is used.
Refer programming of the EEPROMs in the receiver modules to
qualified service personnel or Sennheiser's Service Department,
30900 Wedemark, Germany.


Product specificaties

Merk: Sennheiser
Categorie: Niet gecategoriseerd
Model: EM 203 MF

Heb je hulp nodig?

Als je hulp nodig hebt met Sennheiser EM 203 MF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Sennheiser

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd