Sencor SWM 3777 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sencor SWM 3777 (52 pagina's) in de categorie Fm-transmitter. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/52
SWM 3777
USER’S MANUAL MP3/BT FM Modulator
NÁVOD K OBSLUZE MP3/BT FM modulåtor
NÁVOD NA OBSLUHU MP3/BT FM modulåtor
HASZNÁLATI ÚTMUTATÓ MP3/BT FM modulátor
INSTRUKCJA OBSŁUGI Modulator MP3/BT FM
EN - 1
DESCRIPTION OF EQUIPMENT
1
2
3
4
5
6
7
1 Previous track
2 USB charging port (max. 2.4A)
3 USB port for portable devices
4 Display panel
5 Next track
6Playback/pause/call answer/call back/change
frequency
7 TF memory card slot
EN - 2
SETTING UP AND PAIRING WITH FM RADIO
Before  rst use, be sure to read the safety instructions con-
tained in this user's manual carefully. Connect the modula-
tor to the car socket power supply (12 - 24V). The  rst dis-
played value on the display panel indicates the voltage in the
on-board network of a car, such as 12V. Tune any vacant
frequency on your car stereo and then press the “Change
frequency and mode” button to tune the same frequency
on the modulator (No.6 on the  gure). When this button is
pressed, the frequency number on the modulator display will
start fl ashing, the press the arrow buttons (No.1 and 5 in the
 gure) to set the desired frequency matching the one of your
FM car stereo. Hold down the button (No.1 and 5) to increase
the speed of searching for the desired frequency.
PAIRING VIA BLUETOOTH
Find the Bluetooth modulator name “SWM 3 ” on your 777
Bluetooth portable device to be paired (such as a mobile
phone) and start the pairing process. If you are requested to
enter a pairing code while your device and the modulator are
being paired, use the following code: “0000”.
Note: To ensure a stable Bluetooth connection, make sure
that the distance between the modulator and your connected
device is kept within 5m.
Attention: Some connected devices support common vol-
ume setting. If some of the connected devices do not sup-
port this feature, the volume setting will operate separately
on each device.
USB CHARGING INPUT
This input (No.2 on the fi gure “Device description") is de-
signed for connecting and charging portable devices. Maxi-
mum USB port load is 2.4 A.


Product specificaties

Merk: Sencor
Categorie: Fm-transmitter
Model: SWM 3777

Heb je hulp nodig?

Als je hulp nodig hebt met Sencor SWM 3777 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden