SE Electronics guitaRF Handleiding
SE Electronics
Niet gecategoriseerd
guitaRF
Bekijk gratis de handleiding van SE Electronics guitaRF (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 23 mensen en kreeg gemiddeld 4.8 sterren uit 12 reviews. Heb je een vraag over SE Electronics guitaRF of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/5
guitaRF™ ASSEMBLY + USE
guitaRF™ aS SEMBLY Ma Nua L
sE Electronics guitaRF™ Assembly + Use
Thank you for purchasing an sE Electronics guitaRF! We hope it helps
make your records and live shows sound great, and makes recording
guitars & bass (and anything else!) that much easier for you.
STEP ONE
w the vertical standoff into the
om of the lter, making sure the
side of the standoff is aligned with
back of the lter. Use the included
nch to adjust the tightening nut on
standoff (a) to make sure they’re
ned properly.
STEP TWO
Making sure the at side of the
standoff is facing the screw on the
back of the base stand, insert the
standoff (with the lter attached) into
the base, and tighten it securely in
place with one of the two included
smaller screws (b).
(b)
(a)
Alternatively, the guitaRF can be mounted
to any standard mic stand thread, 5/8” or
3/8” (with the included 3/8” adapter).
guitaRF™ aS SEMBLY Ma Nua L
sE Electronics guitaRF™ Assembly + Use
STEP THREE
Use the second of the smaller screws
(c) to tighten the vertical adjustment
rod (d) to the hardware. This screw/
rod can be used to raise or lower the
condenser or ribbon hung from the
guitaRF hardware, with (e) used to
move it towards or away from the lter.
(c)
(d)
(e)
(f)
(g)
STEP FOUR
Attach the hardware to the top of
the guitaRF with the included larger
screw (f), rubber washer on top of the
bracket, and paper washer underneath.
This screw can be used to rotate the
hardware mount relative to the lter.
STEP FIVE
Insert your dynamic or small-capsule
mic into the pass-through hole of the (g)
guitaRF. It should t snugly.
Screw your condenser or ribbon’s mic
clip (or shockmount) onto the hanging
vertical adjustment rod (d), and then use
(c) (e) (f) , and to ne-tune the position of
the hanging mic relative to the dynamic/
small-capsule mic.
Product specificaties
| Merk: | SE Electronics |
| Categorie: | Niet gecategoriseerd |
| Model: | guitaRF |
Heb je hulp nodig?
Als je hulp nodig hebt met SE Electronics guitaRF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd SE Electronics
9 Juli 2023
1 Juli 2023
1 Juli 2023
10 Juni 2023
10 Juni 2023
Handleiding Niet gecategoriseerd
- Corsair
- Globo
- Graphite
- Deity
- Viomi
- YA-MAN
- Advantix
- Cambium Networks
- Wagner SprayTech
- Solplanet
- Avanti
- Clean Paper
- CDN
- Itho
- Badiona
Nieuwste handleidingen voor Niet gecategoriseerd
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025