Scotsman ID250B-1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Scotsman ID250B-1 (12 pagina's) in de categorie Ijsblokjesmachine. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
INTRODUCTION
This service manual is intended as a reference for
the installer, user, and service agent of this
Scotsman ice dispenser. It includes the necessary
information to install, start up, operate, clean and
maintain this unit.
This manual contains important information, read it before beginning installation or operation.
Keep it for future reference.
ID150, ID200, ID250
May 2002
Page 1
Table of Contents
INTRODUCTION · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Page 1
SPECIFICATIONS · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Page 2
FOR THE INSTALLER · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Page 3
INSTALLATION · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Page 4
WATER GLASS FILLER KIT · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Page 5
WATER GLASS KIT - CONTINUED · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Page 6
ICE DIVERTER KIT · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Page 7
INITIAL START UP · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Page 8
GATE RESTRICTOR PLATE · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Page 9
CLEANING AND SANITIZING · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Page 10
CLEANING AND SANITIZING · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Page 11
TROUBLESHOOTING · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Page 12
SPECIFICATIONS
The ID ice dispenser is a machine that stores
manually filled ice in an insulated, sanitary
container; upon demand it dispenses that ice into a
cup or glass.
NOTE: This ice stand is designed to dispense
cubed ice only. Flaked ice will not work.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to change
without notice.
ID150, ID200, ID250
May 2002
Page 2
Model Dimensions
w” x d” x h”
Basic
Electrical
Hopper
Capacity
Amps Cup
Clearance
Dispense
Actuation
Method
ID150B-1A 22 x 30 x 35 5/8 115/60/1 150 lb 3.0 10” Lever
ID2 0B-1A0 30 x 30 x 35 5/8 115/60/1 200 lb 3.5 10” Lever
ID 50B-1A2 30 x 30 x 39 5/8 115/60/1 250 lb 3.5 10” Lever
Note: Dispenser height includes cover (1 5/8”).
Options: Water glass filler kit ( ). Diverter kit for Scotsman Nugget Ice ( )KWGFID KNUGDIV
Adapters: Adapters are required for placing an ice machine onto the top of this dispenser. See sales
literature for adapter information.
FOR THE INSTALLER
This ice dispenser has been specifically designed
to provide protection against personal injury and
eliminates contamination of ice. To ensure
continued protection and sanitation, observe the
following:
·ALWAYS: disconnect power to the dispenser
before servicing or cleaning.
·NEVER: place hands inside of hopper or gate
area without disconnecting power to the
dispenser.
·Agitator rotation occurs automatically when
dispenser is energized!
·ALWAYS: be sure the removable lid is properly
installed to prevent unauthorized access to the
hopper interior and possible contamination of
the ice.
·ALWAYS: be sure the upper and lower front
panels are securely fastened.
·ALWAYS: keep area around the dispenser
clean of ice cubes.
·CAUTION: Dispenser cannot be used with
crushed or flaked ice.
Use of bagged ice, which has frozen into large
chunks, can void warranty.
The dispenser agitator is not designed to be an ice
crusher. Use of large chunks of ice which “jam up”
inside the hopper will cause failure of the agitator
motor and damage to the hopper. If bagged ice is
used, it must be carefully and completely broken
into small, cube-sized pieces before filling into the
dispenser hopper.
DESCRIPTION
Designed to be manually filled with ice from any
remote ice-making source, these dispensers will
dispense cubes (up to 1-1/4” in size), cubelets and
hard-chipped or cracked ice.
IMPORTANT: For dispensing compressed or
extruded style ice, an Ice Diverter Kit must be
installed on the dispensers (see ICE DIVERTER
KIT (KNUGDIV) in INSTALLATION
INSTRUCTIONS section of this manual. The Ice
Diverter Kit is part of the KBT46 adapter.
ID150, ID200, ID250
May 2002
Page 3


Product specificaties

Merk: Scotsman
Categorie: Ijsblokjesmachine
Model: ID250B-1

Heb je hulp nodig?

Als je hulp nodig hebt met Scotsman ID250B-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Ijsblokjesmachine Scotsman

Handleiding Ijsblokjesmachine

Nieuwste handleidingen voor Ijsblokjesmachine