Scosche NN1498B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Scosche NN1498B (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
IN-DASH INSTALLATION KIT FOR SELECT
If you have any further questions call: TECH HELP 1-800-621-3695x3
© 2005 SCOSCHE INDUSTRIES, INC. SI 7/05 - NN1498 (3000003)
NN1498B
WIRE CODES
For Factory Wiring Codes go to: www.scosche-cars.com
LIABILITY DISCLAIMER
This instruction booklet is based on carefully documented data and research of automobile dash disassembly, wire harness/codes
and information pertaining to installation of this kit in the listed vehicles. Manufacturer cannot be held responsible for discrepancies/
inconsistencies that may occur due to the automobile manufacturing changes or options, or damage that may occur in the
automobile during the installation of components while using this booklet.
2004 NISSAN MAXIMA
5651 MOUNTING PANEL
INTRODUCTION
NOTES:
•See your vehicle’s instructions for any special tools your installation might require.
•Read all instructions accompanying your car stereo/cassette player for proper wiring and mounting instructions.
This premium installation kit is for 2004 Nissan Maxima vehicles. Included are all the parts you need to mount your car
stereo, cassette, or CD player into your vehicle’s dash. Refer to the individual instruction in this manual to remove your
vehicle’s factory radio and assemble the kit.
CAUTION:
DISCONNECT YOUR VEHICLE’S NEGATIVE BATTERY TERMINAL BEFORE THE INSTALLATION
TO HELP PREVENT ELECTRICAL DAMAGE. WE RECOMMEND THE USE OF A VOLT/OHM METER
OVER A TEST LIGHT TO CHECK WIRING. A TEST LIGHT OR GROUNDED WIRE PROBE CAN
CAUSE DAMAGE TO THE VEHICLE'S COMPUTER AND/OR DIAGNOSTIC SYSTEMS. AVOID ALL
FACTORY AIRBAG WIRING - AIRBAGS CAN ACCIDENTALLY DEPLOY CAUSING SERIOUS
INJURY OR DEATH.
5404 POCKET
5403 REAR
MOUNTING
SUPPORT
1. Unscrew the shifter knob.
2. Using a panel removal tool, pop out the shifter panel. Disconnect and remove.
3. Remove two (2) screws from under this panel.
4. Using a panel removal tool, pop out the CD player panel from bottom to top. Disconnect and remove.
5. Remove six (6) screws from behind this panel.
6. Using a panel removal tool, pop the navigation screen panel. Disconnect and remove.
7. Remove two (2) screws from the radio. Disconnect and remove
RADIO REMOVAL
NOTE:
Keep all hardware from A/C controls and pocket to be used to reattach to kit panel.
A. ATTACHING A/C CONTROLS
Reattach the A/C controls to the kit panel using existing hardware.
B. ATTACHING POCKET
Reattach factory pocket to kit panel using existing hardware.
C. ATTACHING CLIPS
Carefully remove spring clips from dash panel and reattach
to kit panel.
POCKET ASSEMBLY
5651
MOUNTING
KIT PANEL
RADIO’S
SUPPLIED
TRIMPLATE
RADIO’S
MOUNTING
SLEEVE
REAR MOUNTING
SUPPORT BRACKET
DIN
RADIO
NOTE:
REAR SUPPORT AVAILABLE
SEPARATELY. REAR
SUPPORTING THE RADIO ADDS
TO THE INSTALLATIONS
STRUCTURAL INTEGRITY.
2
MOUNTING THE RADIO
BEND TABS
OUTWARD
5324 REAR
MOUNTING
SUPPORT
NOTE: Nissan factory bracket modification.
The factory Maxima brackets must be slightly modified to allow proper clearance for the DIN radio
mounting sleeve. The factory radio bolt "indents" on the inside of the factory bracket must be flattened out
in order to provide clearance for the DIN radio's mounting sleeve. Use a hammer or blunt object to faltten
out (2) indents on each bracket. (See Illustration)
LEFT
FACTORY
BRACKET
(INSIDE)
FATTEN
INDENTS
(INSIDE)
FATTEN
INDENTS
RIGHT
FACTORY
BRACKET


Product specificaties

Merk: Scosche
Categorie: Niet gecategoriseerd
Model: NN1498B

Heb je hulp nodig?

Als je hulp nodig hebt met Scosche NN1498B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Scosche

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd