Savage Vlogger Ringlight Handleiding

Bekijk gratis de handleiding van Savage Vlogger Ringlight (1 pagina’s), behorend tot de categorie Statief. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 4.8 sterren uit 3 reviews. Heb je een vraag over Savage Vlogger Ringlight of wil je andere gebruikers van dit product iets vragen? Stel een vraag

®

VLOGGER RINGLIGHT

SETUP & USAGE

1.

5.6.7.8.

2.3.4.

®

1) Mount light to any light stand with a 5/8” spigot and tighten using the knurled knob on the side of the light stand adapter.

2) Attach the AC power cord into the back right of the ringlight and then plug into any household socket.

3) To turn on, tap the On/Off button on the front of the panel. The ringlight should illuminate.

4) Press the brightness button (B+) to brighten or the dimming button (B -) to dim.

5) To color correct the light, tap the “Mode” button two times. To gradually warm the light, press and hold nger on the “Mode” button. The light will then begin

to warm until reaching 2700K. Leave nger on the “Mode” button and the light will begin to cool down to daylight or 5700K. When any desired color

temperature is achieved, remove nger from the “mode” button and the color correction adjustment will stop. Most rooms have multiple ambient light sources.

There is often daylight coming in from a window, an incandescent lamp on and possibly even uorescent strips on overhead. All of these light sources have

different color temperatures but all usually fall between 3200K and 5500K. The color temperature adjustment can be used to match any available light in the

room. Simply stop the color correction adjustment when the light produced from the ringlight appears to match the light in the room. The feature can also be

used for other effects like warming a subject’s face.

6) For vlogging/seles, slide the mirror into the shoemount in the inner center of the ringlight. Tighten the knurled knob to secure the mirror.

7) Mount up to two cell phones to record from multiple devices if desired. Thread the two included bendable arms into the 1/4”-20 threaded holes inside the

shoe mounts on the right and left inside bottom of the ringlight. Thread the silver ball head onto the top of each bendable arm until secure.

8) The cell phone holders are adjustable and t almost any size phone. Simply press the side of the cell phone against the top of the cell phone holder until

the phone slips into place. The cell phone holder’s tension spring will hold the phone securely. Do not transport the ringlight with cell phones attached as the

vibration could allow the phone to detach from the holder.

ATTACH AC POWER CORDPRESS POWER BUTTONBRIGHTENDIM

COLOR CORRECTION ADJUSTMENTATTACH MIRROR & TIGHTEN KNURLED KNOBATTACH BENDABLE ARMS INTO FEMALE THREADSINSERT PHONE INTO HOLDER

MOUNT TO LIGHTSTAND & TIGHTEN KNOB

Thank you for purchasing the Savage Vlogger Ringlight.

Please read this instruction manual before use, and keep for later reference.

professionalphotographymadesimple

800.624.8891 savageniversalcomU.

Product specificaties