Satel KNX-USB Handleiding
Satel
Smarth home
KNX-USB
Bekijk gratis de handleiding van Satel KNX-USB (6 pagina’s), behorend tot de categorie Smarth home. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.9 sterren uit 2.5 reviews. Heb je een vraag over Satel KNX-USB of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6
KNX-USB
KNX-USB interface
Firmware version 1.00 knx-usb_ 9 en 11/1
SATEL sp. z o.o. ul. Budowlanych 66 - POLAND • • 80 298 Gdańsk •
tel. +48 58 320 94 00
www.satel.eu
IMPORTANT
Changes, modications or repairs not authorized by the manufacturer shall void your rights
under the warranty.
SATEL aims to continually improve the quality of its products, which may result in changes in
their technical specications and software. Current information about the changes being
introduced is available on our website.
Please visit us at:
http://www.satel.eu
The declaration of conformity may be consulted at www.satel.eu/ce
The following symbols may be used in this manual:
- note;
- caution.
The KNX-USB interface enables communication between the KNX bus and a computer for
programming and monitoring devices on the bus by using the ETS program (version 5.5
or newer).
Furthermore, the KNX-USB interface can work in the bus logging mode, in which the history
of events generated on the KNX bus is saved to the interface non-volatile memory. The KNX-
USB Soft program allows you to enable / disable the bus logging mode and manage the
interface memory. Information saved in the KNX-USB interface memory allows you to
reproduce the telegram trac on the KNX bus in o-line mode.
You can download the "KNX-USB Soft" program from www.satel.eu.
1. Features
Communication with the KNX bus via integrated bus connector.
Power supply from the KNX bus or from the computer USB port.
Galvanic isolation of the KNX system and computer.
Data transmission between the interface and the computer acc. to USB 2.0 standard.
LEDs indicating the device status.
Easy to connect and use.
2. Description
LEDs:
green LED indicating connection to the KNX bus: –
ON OK, –
ashing – data exchange in progress.
green LED indicating connection to the computer: –
ON OK, –
Product specificaties
| Merk: | Satel |
| Categorie: | Smarth home |
| Model: | KNX-USB |
Heb je hulp nodig?
Als je hulp nodig hebt met Satel KNX-USB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Smarth home Satel
14 Maart 2025
Handleiding Smarth home
- V-Tac
- Tesla
- Airlive
- Theben
- Sungrow
- Inkbird
- Lenovo
- Blebox
- Speed-Link
- Adurosmart
- Philips
- Logicom
- Schellenberg
- EKO
- Delta Dore
Nieuwste handleidingen voor Smarth home
15 Juli 2025
14 Juli 2025
14 Juli 2025
6 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
4 Juli 2025