Satel ETHM-1 Plus Handleiding

Satel Detector ETHM-1 Plus

Bekijk gratis de handleiding van Satel ETHM-1 Plus (41 pagina’s), behorend tot de categorie Detector. Deze gids werd als nuttig beoordeeld door 51 mensen en kreeg gemiddeld 4.1 sterren uit 26 reviews. Heb je een vraag over Satel ETHM-1 Plus of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/41
ETHM-1 Plus
Ethernet communication module
Firmware version 2.07 ethm1_plus_en 12 /20
SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk POLAND
tel. +48 58 320 94 00
www.satel.eu
IMPORTANT
The module should be installed by qualified personnel.
Read carefully this manual before proceeding to installation.
Changes, modifications or repairs not authorized by the manufacturer shall void your rights
under the warranty.
FreeRTOS is used in this device (www.freertos.org).
SATEL aims to continually improve the quality of its products, which may result in changes in
their technical specifications and software. Current information about the changes being
introduced is available on our website.
Please visit us at:
http://support.satel.eu
The declaration of conformity may be consulted at www.satel.eu/ce
The following symbols may be used in this manual:
- ; note
- . caution
CONTENTS
1 General............................................................................................................................. 2
2 Field of application............................................................................................................ 2
3 Electronics board.............................................................................................................. 3
4 Setting address................................................................................................................. 4
4.1 Module connected to INTEGRA / INTEGRA Plus control panel ................................. 4
4.2 Module connected to VERSA control panel ................................................................ 4
5 4 Installation ........................................................................................................................
6 Configuring the settings .................................................................................................... 6
6.1 Module connected to INTEGRA / INTEGRA Plus control panel ................................. 6
6.1.1 ETHM-1 ................................................................................................................ 6
6.1.2 INT-GSM functions ............................................................................................. 11
6.1.3 IP filter ................................................................................................................ 11
6.1.4 User functions .................................................................................................... 13
6.1.5 Virtual keypad .................................................................................................... 14
6.1.6 Macro commands ............................................................................................... 15
6.2 Module connected to VERSA control panel .............................................................. 25
6.2.1 LAN .................................................................................................................... 27
6.2.2 Messaging .......................................................................................................... 27
7 Remote programming / operating of control panel via module .......................................29
7.1 GUARDX program .................................................................................................... 29
7.1.1 settings Configuring the GUARDX program ....................................................... 30
7.1.2 Initiating connection from GUARDX program ..................................................... 31
7.1.3 Initiating connection from keypad (through control panel) .................................. 32
7.1.4 Initiating connection by SMS message ..............................................................32
7.1.5 Establishing connection via the SATEL server ................................................... 32
7.2 Web browser............................................................................................................. 33
7.3 cation INTEGRA CONTROL appli ............................................................................. 34
7.3.1 Configuring the settings in INTEGRA CONTROL application (Android) ............. 34
7.3.2 Configuring the settings in INTEGRA CONTROL application (iOS) ................... 36
7.3.3 Establishing the communication ......................................................................... 38
8 Specifications ................................................................................................................. 38


Product specificaties

Merk: Satel
Categorie: Detector
Model: ETHM-1 Plus
Gewicht: 64 g
Breedte: 68 mm
Diepte: 140 mm
Aantal per verpakking: 1 stuk(s)
Merkcompatibiliteit: Satel
Soort apparaat: Beveiligingsalarmsysteem
Stroomverbruik: 80 mA
Compatibele producten: INTEGRA, INTEGRA Plus, VERSA
Triggerstroom: 70 mA
Operating voltage: 12 V

Heb je hulp nodig?

Als je hulp nodig hebt met Satel ETHM-1 Plus stel dan hieronder een vraag en andere gebruikers zullen je antwoorden