Sanwa STD5000M Handleiding
Pagina's 26 Niet gecategoriseerd
Bekijk de handleiding van Sanwa STD5000M gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
DRAWING No.STD5000M 03-0908 2040 2040
INSTRUCTION MANUAL
STD5000M
CALIBRATOR & STANDARD
0
8 2040 2040DRAWING No.STD5000M 03-0908 2040 2040
CONTENTS
[1] SAFETY PRECAUTIONS – Before use, read the following safety precautions.
…………
1
1-1 Explanation of Warning/Caution Symbols
……………………………………………………
1
1-2 Warning/Caution Instructions for Safe Use
……………………………………………………
1
[2] GENERAL
……………………………………………………………………………………………
3
[3] MAIN FEATURES
……………………………………………………………………………………
3
[4] NAMES OF PARTS
…………………………………………………………………………………
4
[5] HANDLING
……………………………………………………………………………………………
7
[6] OPERATION
…………………………………………………………………………………………
7
6-1 Generating a Voltage (DCV, ACV)
……………………………………………………………
8
6-2 Generating a Current (DCA, ACA)
……………………………………………………………
8
6-3 Generating OHM1 Resistance
………………………………………………………………
9
6-4 Generating OHM2 Resistance
………………………………………………………………
9
6-5 Generating a Frequency (Hz)
………………………………………………………………
10
6-6 Standby Operation (STBY)
…………………………………………………………………
10
6-7 Memory Operation (MEMORY)
……………………………………………………………
11
6-8 Generating an AC FREQUENCY
…………………………………………………………
12
6-9 Generating a CURRENT
……………………………………………………………………
12
6-10 OUTPUT Switch Operation
…………………………………………………………………
12
6-11ALARM RESET (DCV, 50V UP ACV) Operation
…………………………………………
13
6-12 OUTPUT Terminal Operation
………………………………………………………………
13
6-13 FAN Switch Operation
………………………………………………………………………
13
[7] GROUNDING TERMINAL (Case Guard Terminal)
……………………………………………
13
[8] GENERAL SPECIFICATIONS
……………………………………………………………………
14
[9] PERFORMANCE
……………………………………………………………………………………
15
[10] CALIBRATION
………………………………………………………………………………………
22
[11] AFTER-SALE SERVICE
…………………………………………………………………………
23
[12] OTHER
………………………………………………………………………………………………
23
08 2040 2040
− 1 −
DRAWING No.STD5000M 01-0909 2040 2040
[1]
SAFETY PRECAUTIONS – Before use, read the following safety precautions.
Thank you for purchasing Multi-Calibrator Model STD500M. This instruction manual explains how to
use your multi-calibrator safely. Before use, please read this manual thoroughly. After reading it, keep it
together with the product for reference to it when necessary.
The instructions given under “ WARNING” and “ CAUTION” must be followed to prevent
accidental burn or electric shock.
1-1 Explanation of Warning/Caution Symbols
Thesymbolsusedinthismanualandattachedtotheproductareusedtoinformtheuserof
particularlyimportantinformationforsafetyasfollows.
The WARNING messages are intended to prevent accidents to operating personnel such as burn
and electric shock.
The CAUTION messages are intended to prevent damage to the instrument.
The symbol indicates the presence of high voltage. To prevent the danger, do not touch the
OUTPUT terminal carrying this symbol.
1-2 Warning/Caution Instructions for Safe Use
WARNING 1•Confirm that the AC power source to be used matches the AC voltage
specified on the rear panel of the instrument.
•Confirm that there is no damage on the exterior or no irregularities in the
internal functioning of the instrument.
•If any irregularity is suspected, do not use the instrument.
WARNING 2
•Do not use the instrument if it does not function even after the fuse has
been replaced or if the newly replaced fuse is blown.
WARNING 3
•To prevent an electric shock, do not use the instrument with a wet hand,
under high atmospheric humidity (80% or more) or when water drops
are attached.
WARNING 4
•Do not touch the OUTPUT terminals to prevent an electric shock due to
the high voltage that may be output from them.
•When measurement leads are connected to the OUTPUT terminals, be
careful in handling of the leads to avoid the risk of electric shock.
•When measurement leads are connected to the OUTPUT terminals and
these are generating high voltage, do not place the metallic parts
(without the protection covers) on the other ends of the measurement
leads on a flammable object with low insulation resistance. Otherwise, a
fire hazard may result.
WARNING 5
•Be careful in handling the instrument when the generated voltage is 70
V DC or 33 Vrms AC (46.7 Vpeak) or more. Otherwise, there is a risk of
electric shock.
WARNING 6
•Do not use the instrument while its case is uncovered.
WARNING 7
•For safety, calibrate and inspect the instrument at least once a year.
Product specificaties
| Merk: | Sanwa |
| Categorie: | Niet gecategoriseerd |
| Model: | STD5000M |
Heb je hulp nodig?
Als je hulp nodig hebt met Sanwa STD5000M stel dan hieronder een vraag en andere gebruikers zullen je antwoorden