Sanus SOA-EDM1 Handleiding

Sanus Niet gecategoriseerd SOA-EDM1

Lees hieronder de 📖 handleiding in het Nederlandse voor Sanus SOA-EDM1 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

6901-602184 00

OPTION 1:

Mount with Screws OPTION 2: Mount with Command™ Picture Hanging Strips from 3M®

Align the channel

for plug insertion.

Align the channel

for plug insertion.

TOOL NEEDED (for Option 1 Install)

Phillips Screwdriver

SOA-EDM1 INSTALLATION INSTRUCTION

WAL L side

ALL side

WAL L side

ALL side

WAL L side

Base Screws (Option 1 Install)

Command™

Picture

Hanging Strips

from 3M®

(Option 2 Install)

PARTS INCLUDED

WE’RE HERE TO HELP

Call us at: 800-359-5520

Or, chat at: SANUS.com/chatSO

Our US-based install experts are standing by to help.

30 seconds

1 hour

WAL L side

WALL sid e

WAL L s

ide

WALL sid e

WAL L side

WALL sid e

ALL si de

WALL sid e

ALL si d

WALL side

ALL si de

WALL sid e

WALL side

WALL sid e

WALL si de

WALL sid e

WALL si de

WALL sid e

ALL si de

WALL sid e

WALL si de

WALL sid e

ALL si de

WALL s ide

WALL sid e

WALL si de

WALL sid e

WALL si de

WALL s ide

WALL sid e

Secure the base in place using

the two screws provided.

The screws are designed to

work with wood stud or drywall

only, without anchors. Predrilling

is not necessary.

CAUTION:

Avoid damage to the base.

DO NOT overtighten the screws.

WALL sid e

WALL sid

WALL side

Lightly clean both wall and dot mount surfaces with isopropyl alcohol.

DO NOT use household cleaners as they may leave behind residues

which can affect adhesion.

Remove one liner and

press the pair of strips

onto the back of the base.

Separate the strips and

press together until

they click.

Remove the other liner.

Press the base firmly against the surface for 30 seconds.

Remove the base by lifting up at the bottom of the base.

Now press the strip on the wall for 30 seconds to ensure

adhesive hold.

Wait 1 hour before reattaching the base. Line up

the strips and press until they click.

A D

B E

C F

Milestone Global Headquarters • 6436 City West Parkway • Eden Prairie, MN 55344 USA

Milestone AV Technologies and its a liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this

product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or su ciency of the information contained in this document.