Sanus NF206 Handleiding
Sanus
Niet gecategoriseerd
NF206
Bekijk gratis de handleiding van Sanus NF206 (6 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 42 mensen en kreeg gemiddeld 4.6 sterren uit 21.5 reviews. Heb je een vraag over Sanus NF206 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/6

Assembly Instructions for Natural Furniture: Model NF206
Thank you for choosing the Natural Furniture line from Sanus Systems. If you have any questions
regarding this or any other Sanus Systems product, contact us at 800.359.5520 or visit us at
www.sanus.com. Our customer service representatives will assist you with any issues regarding
assembly or missing parts. Check to make sure none of the parts are missing or defective. Never
use defective parts. Replacement parts for products purchased from an authorized dealer will be
shipped directly to you. Please call Sanus Systems before returning products to retail stores.
Supplied Parts List: (Not to Scale)
Sanus Systems 2221 Hwy 36 West. St. Paul, MN 55113
800.359.5520 www.sanus.com 05.12.06 (100038)
Front Frame - A
Qty. 1
Rear Frame - B
Qty. 1
Glass Top Shelf - C
Qty. 1
Glass Mid Shelf - D
Qty. 5
Cross Tube - E
Qty. 6
Cross Tube W/ Stud - F
Qty. 4
Plastic Wire Cover
30 in - G
Qty. 1
Plastic Wire Cover
21 in - H
Qty. 1
Wire Strap - I
Qty. 2
Three Hole Plate - J
Qty. 4

1.5 in. Washer - O
Qty. 6
Decorative Face Bolt - N
Qty. 6
Supplied Hardware: (Full Size)
1 in. Washer - L
Qty. 8
Allen Key - M
Qty. 1
Glass Protector - P
Qty. 4
Step 1: Attach Cross Tubes to Front Frame
NOTE: For ease of assembly, lay the Front Fame face down on a soft at surface after inserting the six Decorative
Face Bolts.
Insert six Decorative Face Bolts ( ) through the Front Frame ( ). Slide a Three Hole Plate ( ) over the Decorative Face N A J
Bolts; then, screw a Cross Tube (E) onto each Decorative Face Bolt, rmly hand tighten each Cross Tube.
Diagram 1
N
J
E
A
Allen Bolt - K
Qty. 10

Step 2: Attach Cross Tubes W/Stud to Front Frame
Place a 1 inch Washer ( ) on the threaded stud of each Cross tube W/Stud ( ) and screw them into the Front Frame ( ). L F A
Firmly hand tighten each Cross Tube W/Stud.
Diagram 2
F
L
A
Product specificaties
Merk: | Sanus |
Categorie: | Niet gecategoriseerd |
Model: | NF206 |
Heb je hulp nodig?
Als je hulp nodig hebt met Sanus NF206 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Sanus
1 April 2025
1 April 2025
1 April 2025
28 Maart 2025
27 Maart 2025
11 Februari 2025
7 Januari 2025
8 December 2024
17 November 2024
17 November 2024
Handleiding Niet gecategoriseerd
- Tovsto
- ANDYCINE
- Crunch
- Datacolor
- Nacon
- Sthor
- Valberg
- Highpoint
- AVM
- Make Noise
- Rocket Espresso
- Mixx
- Meriden
- Leen Bakker
- ILive
Nieuwste handleidingen voor Niet gecategoriseerd
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025
2 Augustus 2025