Sanus F42A Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sanus F42A (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
I N S T A L L A T I O N I N S T R U C T I O N S
Decorative Display Frame and
Optical Filter Kit
32", 42", and 50"
32", 42", and 50" Installation Instructions
2
DISCLAIMER
CSAV, Inc., and its affiliated corporations and subsidiaries
(collectively, "CSAV"), intend to make this manual accurate and
complete. However, CSAV makes no claim that the information
contained herein covers all details, conditions or variations, nor
does it provide for every possible contingency in connection
with the installation or use of this product. The information
contained in this document is subject to change without notice
or obligation of any kind. CSAV makes no representation of
warranty, expressed or implied, regarding the information
contained herein. CSAV assumes no responsibility for
accuracy, completeness or sufficiency of the information
contained in this document.
IMPORTANT WARNINGS AND
CAUTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: IMPROPER INSTALLATION CAN LEAD TO
ACCESSORY OR DISPLAY FALLING CAUSING SERIOUS
PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is
the installer’s responsibility to make sure the combined
weight of all components attached to display does not exceed
the weight capacity of the display mount!
INTRODUCTION
TOOLS REQUIRED FOR INSTALLATION
• No tools are required for this installation
INSPECT MOUNT BEFORE ASSEMBLY
Carefully inspect mount assembly for shipping damage
(see Figure 1). If damage is apparent, call your carrier
claims agent and do not continue with installation until
the carrier has reviewed the damage.
NOTE: Thoroughly read and understand all assembly
instructions before starting installation.
Table 1: PARTS
ITEM QTY.DESCRIPTION
10 FRAME, Decorative Display 1
20 INSTRUCTIONS, Installation 1
30 LENS, Optical (when ordered sepreately) 1
WARNING: USING IMPROPER HARDWARE CAN
LEAD TO MOUNT AND/OR DISPLAY FALLING. Use
only hardware provided with mount. DO NOT
substitute!
10
30
20
Installation Instructions 32", 42", and 50"
3
For the frame to properly fit it must completely cover the bezel
on the display.
Use the figure below and the Display Compatability Tables on
page 4 to determine if frame will work with display.
The frame will fit the display if the top, side and bottom bezels
on display all measure less than 4 ½" (114mm).
To make sure frame fits display:
1. Measure width of upper bezel on display.
2. Measure the distance from the top of display to the inside of
the upper bezel (Edge of screen).
3. Record measurement.
4. Measure width of side bezels on display.
5. Measure the distance from the right or left of display to the
inside of the right or left bezel (edge of screen).
NOTE: Right and left bezels should be the same so only one
side needs to be measured.
6. Record measurement.
NOTE: The left and right side bezels will be the same width so
you only have to do this on one side of your TV.
7. Measure the width of lower bezel on display.
8. Measure the distance from the bottom of display to the
inside of the bottom bezel (edge of screen).
9. Record measurement.
NOTE: Depending on the brand and model of display, this
measurement may or may not be the same as the width
of the upper bezel.
Figure 1
Display Size Compatability Tables
TELEVISIONS MAXIMUM ALLOWABLE DIMENSIONS
Diagonal Dim. Height (inches / mm) Width (inches / mm)
32 23 31/32 (609mm) 37 3/32 (942mm)
42 28 57/64 (734mm) 45 13/16 (1164mm)
50 32 27/32 (834mm) 52 25/32 (1341mm)
Step 1
Step 2
Step 3


Product specificaties

Merk: Sanus
Categorie: Niet gecategoriseerd
Model: F42A

Heb je hulp nodig?

Als je hulp nodig hebt met Sanus F42A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Sanus

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd