Samsung UN32F5000AF Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Samsung UN32F5000AF (2 pagina's) in de categorie Televisie. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
defaults.
Channel Menu
Memorizing Channels
If you are not using a cable box or satellite box, when you first set up
your TV using , the TV memorized the channels that were Plug & Play
available over the air or through your cable system and added them to
the . The and functions described Channel List Antenna Auto program
below let you re-run the channel memorization function without having to
re-run the procedure.Plug & Play
Antenna (Switch to Cable / Switch to Air
t
)
Before your television can memorize the available channels, you must
select your TV's signal source, (using an antenna) or . Select Air Cable
Menu > > > or . After you have selected the Channel Antenna Air Cable
signal source, go on to the Auto Program function.
✎Selecting the signal source using the function also Antenna
determines the signal source the TV is tuned to. For example, if you
receive your TV signal over the air, and you select , you will Cable
see only snow. You must select to see a picture.Air
Auto Program
The function memorizes all channels that are available Auto Program
over the air or through your cable system and adds them to the Channel
List.
✎If your TV is connected to a cable box or satellite box, you do not
need to run . You will use the tuner in the box, not the Auto Program
tuner in the TV, to select channels.
To start , follow these steps:Auto Program
1. Push MENU
m
→Channel →Auto Program →ENTER
E
on your
remote. The Antenna Source screen appears.
2. On the Antenna Source screen, select the source of your TV signal.
Air
If your TV is connected to an antenna choose , and then press Air
ENTER
E
. The TV will automatically start memorizing channels.
Cable
If your TV is connected to a cable outlet, choose , and then Cable
press ENTER
E
. Go to Step 3.
Auto
If you choose , and then press Auto ENTER
E
, the TV will
automatically select the correct Antenna source. Go to Step 3.
3. On the Cable Type screen, use the buttons to select the ◄/►/▲/▼
type of digital and analog cable systems you have: , , or STD HRC
IRC STD Start. Most systems are (Standard). When done, select ,
and then press ENTER
E
. The TV will start memorizing channels.
✎Channel memorization can take up to 45 minutes, depending on
your cable system.
✎Memorized channels are added to the list. These Added Channels
are the channels you will see when you use the Channel buttons on
your remote.
Clear Scrambled Channel
This function filters out scrambled channels after is Auto Program
completed. This process may take 20~30 minutes.
✎Press the ENTER
E
button to stop . Clear Scrambled Channel
✎This function is only available in mode. Cable
Managing Channels
Channel List
See your list of Added channels, Favorite channels, or channels you've
scheduled for viewing. Add or delete Favorite channels, add or delete
channels from the list, schedule channels or programs Added Channels
for viewing. Select a channel to watch on the , All Channels Added
Channels Favorite, or screen by pressing the buttons, and then ▲/▼
pressing the ENTER
E
button.
✎If you use a cable box or satellite box, you cannot use the Channel
List functions.
Added Channels
6 Air
6-1 ♥ TV #6
7-1 ♥ TV #7
8 Air
9 Air
9-1 ♥ TV #9
10 Air
10-1 ♥ TV #10
11-1 ♥ TV #11
Air Zoom Select ''T Tools ► Next Program
Channel List Screens icons are listed on the left side. Select an
icon using the buttons to view each list.▲/▼
■
All Channels: Shows all currently available channels including
those you deleted from the list.Added Channels
■
Added Channels: Shows all Added Channels. These are the
channels that appear when you press the button.CH
■*
Favorite: Shows all favorite channels.
■
Programmed: Shows all channels and programs currently
scheduled using .Timer Viewing
✎Remote control buttons active on the screen.Channel List
xGreen ( ): Enlarges or shrinks a channel number.Zoom
xYellow ( ): Move the cursor to a channel. Press the Yellow Select
button to select the channel. A
c
mark appears. Repeat to select
additional channels. Then, open the Tools menu and apply a
function to the channels you selected.
x
T
(Tools Channel List): Displays the Tools menu. (The Tools
menus may differ depending on the situation.)
x► ( ): Displays next programs. Next Program
Display Icons Used in the Channel List Screens
Icons Meaning
c
A selected channel.
*
A Favorite channel.
)
A reserved program.
(
A program currently being broadcast.
The Channel List Tools Menu
OChannel List →
t
The Channel List Tools menu contains most of the functions you can use
on the , , and List screens. To All Channel Added Channels Favorite
view, select a list screen, select a channel, and then press the TOOLS
button.
■
Add / Delete Added : Delete a channel from or add a channel to the
Channels list.
To delete channels from the list, follow these steps:Added Channels
1. Added ChannelsSelect one or more channels in the list using the
▲/▼ buttons and the Yellow ( ) button on your remote.Select
2. Press the TOOLS button on your remote. The Tools menu appears.
3. DeleteSelect in the Tools menu, and then press the ENTER
E
button.
✎You can adjust and store settings for each external device you have
connected to an input on the TV. Picture Sizes available by Input
Source are listed below:
Input Source Picture Size
ATV, AV, Component (480i, 480p) 16:9, Zoom1,
Zoom2, 4:3
DTV (1080i, 1080p), Component (1080i,
1080p), HDMI (720p, 1080i, 1080p)
16:9, Wide Fit, 4:3,
Screen Fit
■
Digital Clean View: If the broadcast signal received by your TV is
weak, you can activate the feature to reduce any Digital Clean View
static and ghosting that may appear on the screen.
✎When the signal is weak, try all the options until Digital Clean View
the TV displays the best picture.
■
MPEG Noise Filter: Reduces MPEG noise to provide improved
picture quality.
■
HDMI Black Level: For HDMI signals, select the black level to adjust
the screen depth. Low make blacks look darker.
✎Available only in mode (RGB signals).HDMI
■
Film Mode: Sets the TV to automatically sense and process film
signals from all sources and adjusts the picture for optimum quality.
✎Available in ATV, DTV (interlace), AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
■
LED Clear Motion: Removes drag from fast scenes with a lot of
movement to provide a clear picture.
Picture Reset
Resets the picture settings to their factory defaults.
Sound Menu
Mode
t
■
Standard: Selects the normal sound mode.
■
Music: Emphasizes music over voices.
■
Movie: Provides the best sound for movies.
■
Clear Voice: Emphasizes voices over other sounds.
■
Amplify: Increase the intensity of high-frequency sounds to allow a
better listening experience for the hearing impaired.
Equalizer
Available in Standard sound mode only.
■
Balance L/R: Adjusts the balance between the right and left speaker.
■
100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):
Adjusts the loudness of specific bandwidth frequencies.
■
Reset: Resets the equalizer to its default settings.
DTS TruSurround
Available in sound mode only.Standard
DTS TruSurround is a patented DTS technology that solves the problem
of playing 5.1 multichannel content through two speakers. TruSurround
delivers a compelling, virtual surround sound experience through any
two-speaker playback system, including internal television speakers. It is
fully compatible with all multichannel formats.
Preferred Language
Digital channels only.
Digital-TV broadcasts can transmit many audio tracks simultaneously (for
example, simultaneous translations of a program into foreign languages).
✎You can only select a language from among the ones being
broadcast.
Multi-Track Sound
Analog channels only.
■
Mono: Select for channels that are broadcasting in mono or if you are
having difficulty receiving a stereo signal.
■
Stereo: Select for channels that are broadcasting in stereo.
■
SAP: Select to listen to the Separate Audio Program, which is usually
a foreign-language translation.
✎Depending on the program being broadcast, you can listen to
Mono, Stereo SAP or .
Auto Volume
Because each station has its own broadcasting conditions, the
volume may fluctuate each time you change the channel. This feature
automatically adjusts the volume of a channel by lowering the sound
output when the modulation signal is high or by raising the sound output
when the modulation signal is low.
SPDIF Output for 32" and above models
The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed
digital audio signal when you connect the digital audio jack on the back
of the TV to a digital audio in jack on a receiver or home theater.
■
Audio Format: You can select the Digital Audio output (SPDIF)
format. The available Digital Audio output format may differ depending
on the input source.
✎By connecting the TV to a receiver or home theater with Dolby
Digital Dolby Digital and 5.1ch speakers and selecting , you can
maximize your interactive 3D sound experience.
■
Audio Delay: Lets you correct timing mismatches between the audio
track and the video when you are watching the TV and listening to
digital audio output from the TV through an external device such as
an AV receiver. When you select , a slider appears. Use Audio Delay
the left and right arrow buttons to adjust the slider. Press ENTER
E
when done (0ms ~ 250ms).
Speaker Select
If you are listening to the sound track of a broadcast or movie through an
external receiver, you may hear a sound echo caused by the difference in
decoding speed between the TV’s speakers and the speakers attached
to your audio receiver. If this occurs, set the TV to .External Speaker
✎When you set to , the TV’s Speaker Select External Speaker
speakers are turned off. You will hear sound through the external
speakers only. When you set to both Speaker Select TV Speaker
the TV’s speakers and the external speakers are on. You will hear
sound through both.
✎When is set to , the Speaker Select External Speaker VOLUME
and buttons will not operate and the sound settings will be MUTE
limited.
✎If there is no video signal, both the TV’s speakers and the external
speakers will be mute.
Visual Impaired
Digital channels only.
Adds verbal description to the main audio to help the visually impaired.
Sound Reset
Resets all sound settings to the factory
To add channels to the list, follow these steps:Added Channels
1. All ChannelsSelect one or more channels in the list using the ▲/▼
buttons and the Yellow ( ) button on your remote.Select
2. Press the TOOLS button on your remote. The Tools menu appears.
3. AddSelect in the Tools menu, and then press the ENTER
E
button.
✎All deleted channels are shown on the list. You add All Channels
channels back to the list on the list.Added Channels All Channels
✎A gray-colored channel indicates the channel has been deleted from
the list. Added Channels
✎The menu option only appears for deleted channels.Add
■
Add to Favorite /Delete from Favorite
t
: Lets you add
channels to and delete channels from your list.Favorites
To add channels to the list, follow these steps:Favorites
1. All ChannelsSelect one or more channels in the list using the ▲/▼
buttons and the Yellow ( ) button on your remote.Select
2. Press the TOOLS button on your remote. The Tools menu appears.
3. Add to FavoriteSelect in the Tools menu, and then press the
ENTER
E
button.
To delete channels from the list, follow these steps:Favorites
1. FavoriteSelect one or more channels in the Channels list using the
▲/▼ buttons and the Yellow ( ) button on your remote.Select
2. Press the TOOLS button on your remote. The Tools menu appears.
3. Delete from FavoriteSelect in the Tools menu, and then press the
ENTER
E
button.
■
Timer Viewing: You can schedule a channel to be displayed
automatically at a set time, even when you are watching another
channel. You must set the current time first in the > Time Clock
function to use .Time Viewing
To schedule a channel, follow these steps:
1. Added ChannelsSelect a channel in the list using the buttons ▲/▼
and the Yellow ( ) button on your remote.Select
2. Press the TOOLS button on your remote. The Tools menu appears.
3. Time ViewingSelect in the Tools menu, and then press the
ENTER
E
button. The Time Viewing screen appears.
Antenna Channel Repeat
▲
DTV Air 6-1 Once
▼
L
Move
U
Adjust
E
Enter
R
Return
Timer Viewing
Date Start Time
01-01-2013 12 : 01 am
4. Use the buttons to move from entry field to entry field and the ◄/►
▲/▼ buttons to change the entries. Where numbers are displayed,
you can also enter numbers directly using the number keypad on
your remote.
✎If you select or , the date you select in the Everyday Every Week
Date field becomes the start date for your scheduled viewing.
For , the TV will turn on every day, at the time you Everyday
selected, starting from that date. For , the TV will turn Everyweek
on every week, on the same day of the week as the start date
you selected, at the time you selected, from that day on. If you
select , the TV will turn on once, on the date and time you Once
selected.
5. Press the ENTER
E
button on your remote when done.
✎Only can be scheduled.Added Channels
✎Scheduled programs and channels are displayed in the
Programmed List.
✎When you select a digital channel, press the button to view the ►
digital program list. If you highlight a program in the list, and then
press the ENTER
E
( ) button, you set for Schedule Timer Viewing
that program directly.
■
Channel Name Edit: Analog channels only. Lets you assign a name
of up to five characters to an analog channel. For example, Hist,
Food, Golf, etc. This makes it easier to find and select a channel.
■
Deselect All: Deselect all the selected displayed channels.
✎You can only select when one or more channels are Deselect All
selected.
■
Select All: Select all the channels in the displayed channel list.
■
Auto Program Auto Program: See under Memorizing Channels.
Programmed List (on the Channel List Screen)
The list displays the channels and programs you have Programmed
scheduled for viewing using the function. You can view, Time Viewing
modify, or delete a show you have scheduled using the functions on the
Programmed List screen Tools menu.
Programmed List Screen Tools Menu
OChannel List Programmed → →
t
■
Change Info: Change the scheduling information for a show or
channel you have scheduled.
To change the information, follow these steps:
1. Programmed Channel ListSelect the List icon on the left side of the
screen, and then press the ENTER
E
button.
2. ProgrammedOn the List screen, select the show or channel entry
you want to change, and then press the button. The Tools TOOLS
Menu appears.
3. Change InfoSelect , and then press the ENTER
E
button. The
Time Viewing screen appears.
4. Use the buttons to move from entry field to entry field and the ◄/►
▲/▼ buttons to change the entries. Where numbers are displayed,
you can also enter numbers directly using the number keypad on
your remote.
Press the ENTER
E
button when done.
■
Cancel Schedules: Cancel a show or channel you have scheduled.
To cancel a scheduled show or channel, follow these steps:
1. Programmed Channel ListSelect the List icon on the left side of the
screen, and then press the ENTER
E
button.
2. ProgrammedOn the List screen, select the show or channel entry
you want to cancel, and then press the button. The Tools TOOLS
Menu appears.
3. Cancel SchedulesSelect , and then press the ENTER
E
button.
The screen appears.Cancel Schedule
4. OKSelect , and then press the ENTER
E
button.
■
Information: Display the information for a show or channel you have
scheduled. You can also change the schedule Information.
1. Programmed Channel Select the List icon on the left side of the
List screen, and then press the ENTER
E
button.
2. ProgrammedOn the List screen, select the show or channel entry
you want information for, and then press the button. The TOOLS
Tools Menu appears.
3. Select Information, and then press the ENTER
E
button. The
Timer Viewing Info screen appears.
4. Change InfoSelect and press the ENTER
E
button to change
information, or select Close and press the ENTER
E
button to
close the Information screen.
■
Select All / Deselect All: You can select or deselect all channels in
the channel list.
Other Channel Menu Functions
Channel Mode
Lets you select the channel list displayed when you press the
<
CH
>
(Channel) button on your remote. For example, if you select Favorite
Channels, you will only see Favorite channels when you press the
<
CH
>
button.
Fine Tune
Analog channels only.
If the reception is clear, you do not have to fine tune the channel, as
this is done automatically during the search and store operation. If the
signal is weak or distorted, fine tune the channel manually.
✎Select the channel, and then select Fine Tune.
✎Fine tuned channels that have been saved are marked with an
asterisk “*” on the right-hand side of the channel number in the
channel banner.
✎To reset fine-tuning, select the channel, select Fine Tune, and then
select on the Reset Fine Tune screen.
Setup Menu
Plug & Play
Lets you re-run the initial setup procedure. Plug & Play
Language
Set the menu language.
✎Choose between , and .English Español, Français
Setting the Time
Time
✎The time you set will appear when you press the button.INFO
■
Clock: Set the clock so you can use the various timer features of
the TV.
✎If you disconnect the power cord, you have to set the clock again.
To set the clock, follow these steps:
1. Setup Time ClockSelect > > .
2. Press ENTER
E
and select or , and then press Auto Manual
ENTER
E
again.
If you selected Auto:
The TV will automatically download the correct time from a digital
channel.
ySelect , and then press the Time Zone ENTER
E
button. Use
the buttons to select your , and then press ▲/▼ Time Zone
ENTER
E
.
ySelect DST (Daylight Savings Time), and then press ENTER
E
.
Select if you want to turn the adjustment on and off On DST
manually. Select to turn off the adjustment. Select if Off DST Auto
you want the TV to adjust to automatically. Press DST ENTER
E
when done.
✎DST Time Zone Clock and function are only available when the
Mode Auto is set to .
If you selected Manual:
The screen appears. Use the buttons to change the Clock Set ▲/▼
values in each field or use the number buttons to enter the values
directly. Use the buttons to move from field to field. When done ◄/►
with all the fields, press ENTER
E
.
✎Available only when is set to .Clock Mode Manual
■
Sleep Timer
t
Automatically shuts off the TV after a preset period of time. (30, 60,
90, 120, 150 and 180 minutes).
✎To cancel the , select .Sleep Timer Off
Timer 1 / Timer 2 / Timer 3
Turns the TV on and off automatically at times and days you select. You
can set three different on/off timer settings.
✎You must set the clock first.
■
On Time / Off Time: Set the hour, minute, am/pm, and Activate/
Inactivate fields for and . Use the buttons to On Time Off Time ◄/►
move from field to field. Use the buttons to change the values ▲/▼
in each field. To activate the timer with the setting you have chosen,
set the Activate/Inactivate field to .Activate
■
Volume: Set the desired loudness.
■
Contents: To select what will be turned on when the timer setting is
activated. You can set the TV to turn on a specific channel or play
back contents such as photo or audio files. Use the buttons to ◄/►
move to the Contents field, and then press the ENTER
E
button.
The Contents screen appears. Use the buttons to move from ◄/►
field to field. Use the buttons to change the values in each field.▲/▼
- TV/USB: Select or . The USB device must be connected TV USB
to your TV before you can select USB.
- Antenna Air Cable: Displays the current antenna source, or .
- Channel: If you have selected TV, select the desired channel.
- Music/Photo: If you have selected USB, follow these steps to
select a folder containing MP3 (Music) or JPEG (Photo) files on the
USB device:
✎The maximum number of files the TV can display, including sub
folders, in one folder of a USB storage device is 2000.
✎The media may not play smoothly if you use a USB device rated
lower than USB 2.0.
1. MusicUse the buttons to move to the field under ◄/► or the
field under , and then press the Photo ENTER
E
button. The TV
displays a single folder (the Root folder) and the type or name of the
device.
The On Screen Menus
Your TV has two kinds of menus, the Main menu and the various Tools
menus. The Main menu gives you access to most or all of the menu
options available on your TV. The Tools menus display a selected number
of frequently used menu options that change depending on the screen
you are viewing. A Tools menu symbol (
T
) in the lower right side of the
screen indicates that a Tools menu is available.
The Main menu has seven primary categories:
yPicture ySound yChannel ySetup
yInput yApplication ySupport
To view the Main menu, press the button on your remote. To view MENU
a Tools menu, press the button on your remote.TOOLS
✎The menu options that appear in the Main menu depend on the
Source you have selected. For example, if you have selected the
HDMI source, the Channel category will not appear. To see the
Channel category, you must first select TV in the Source List.
The Menu options are presented below, arranged by Main menu
categories. A Tools button symbol (
t
) next to an option name
indicates the option is also available in one of the Tools menus.
Picture Menu
Mode
t
Select your preferred picture mode.
✎When your TV is connected to a PC, you can only select Entertain
and .Standard
■
Dynamic: Brightens the screen. Suitable for a bright room.
■
Standard: Suitable for a normal room brightness.
■
Movie: Darkens the screen, making it less glary. Suitable for watching
movies in a darkened room.
■
Entertain: Sharpens the picture. Suitable for games.
✎Only available when the is connected to a .TV PC
Samsung MagicAngle for 19", 22" models
Adjust screen viewing Angle to optimize screen quality according to your
viewing position.
■
Samsung MagicAngle: When viewing the screen at an angle from
below or above by setting the appropriate mode for each position you
can obtain a similar picture quality as viewing the screen directly from
the front.
Off: Select when viewing from the front position.
Lean Back Mode: Select when viewing from a slightly lower position.
Standing Mode: Select when viewing from the upper position.
■
Mode: Adjust screen viewing angle.
✎When is set to or Samsung MagicAngle Lean Back Mode
Standing Mode Gamma, is not available.
Backlight / Contrast / Brightness / Sharpness /
Color / Tint (G/R)
■
Backlight: Adjusts the brightness of the screen by adjusting the
brightness of the individual pixels.
■
Contrast: Increases or decreases the contrast between dark and light
areas of the picture.
■
Brightness: Adjusts the brightness of the screen. Not as effective as
Backlight.
■
Sharpness: Sharpens or dulls the edges of objects.
■
Color: Adjusts the color saturation. The higher the Color setting, the
more intense the color. Low settings remove color and the picture
becomes black, white, and gray.
■
Tint: Adjusts the amount of green and red in the picture. As you
increase the amount of green, the amount of red decreases and vice
versa.
✎When the TV is connected to a PC, you can only make changes to
Backlight, Contrast, Brightness, Sharpness.and
Advanced Settings
Available in and mode only.Standard Movie
Compared to previous models, new Samsung TVs offer a more precise
picture with more precise controls.
✎When your TV is connected to a PC, you can only make changes to
Gamma White Balance and .
■
Dynamic Contrast: Adjusts the screen contrast.
■
Black Tone: Selects the black level to adjust the screen depth. Darker
settings make blacks look darker.
■
Flesh Tone: Adjusts the amount of red in skin tones.
■
Color Space: Auto automatically matches the range of colors (the
variety and number of colors) available to create pictures with the
color range of the video source. Native provides a color range wider
than the color range of the video source.
■
White Balance: Adjusts the color temperature of the picture so that
white objects look white (instead of, for example, slightly pink or
slightly yellow) and the overall color of the picture looks natural.
R-Offset / G-Offset / B-Offset: Adjusts how dark each color (red,
green, blue) is.
R-Gain / G-Gain / B-Gain: Adjusts how bright each color (red, green,
blue) is.
Reset White Balance: Resets the to it’s default settings.
■
Gamma: Adjusts the primary color intensity.
■
Motion Lighting: When on, the TV automatically adjusts the
brightness of the screen in response to the brightness of the room. In
bright light, the screen brightens. In dim light, the screen dims.
✎Available in mode only.Standard
Picture Options
✎When the TV is connected to a PC, you can only make changes to
the Color Tone Size HDMI Black Level, , and .
■
Color Tone: Cool makes the picture bluer (cooler). Warm 1 and Warm
2 make the picture redder (warmer).
✎Warm1 Warm2 and are deactivated when the picture mode is set
to .Dynamic
■
Size: Set the size and aspect ratio of the picture on the screen. Your
cable box or satellite receiver may have its own set of screen sizes
as well. However, we highly recommend you use the TVs 16:9 mode
most of the time.
16:9: Sets the picture to the 16:9 wide screen format.
Zoom1: Provides moderate magnification of the picture. Sides, top,
and bottom are cut off.
Zoom2: Provides larger magnification of the picture. Sides, top, and
bottom are cut off.
Wide Fit: Enlarges the aspect ratio of the picture so the picture fits
the entire screen.
4:3: Sets the picture to the old, 4:3 format and puts black or gray
borders on the right and left of the picture.
✎Do not watch your TV in the 4:3 format for a long time. Traces of
borders displayed on the left, right and center of the screen may
cause image retention (screen burn) which is not covered by the
warranty.
Screen Fit: Displays the full image without any cut-off when your TV is
inputting HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p)
HD signals.
✎HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p
(1920x1080) or 720p (1280x720) resolution.
2. Press the ENTER
E
button. A list of folders on the device appears.
✎If there are no folders on your device, press the Yellow ( ) Select
button to select the Root folder, and then press the RETURN
button. The Timer screen re-appears.
3. Use the buttons to highlight a folder that contains music or ▲/▼
photos, and then press the Yellow ( ) button to select the folder.Select
4. Press the RETURN button. The Timer screen re-appears.
■
Repeat Once Everyday Mon~Fri Mon~Sat Sat~Sun: Select , , , , or
Manual Manual. If you select , you can select the days you want to
activate the timer by using the buttons to highlight the day, and ◄/►
then pressing the ENTER
E
button. To unselect a day, highlight it,
and then press the ENTER
E
button.
When you are finished making all your selections on the Timer screen,
press either the ENTER
E
or button.RETURN
Other Features
Game Mode
When you connect a game console such as a PlayStation™ or Xbox™
to your TV, you can enjoy a more realistic gaming experience by turning
on the function.Game Mode
✎Precautions and limitations for game mode:
xBefore you disconnect the game console and connect another
external device, set to in the setup menu.Game Mode Off
xIf you display the TV menu in , the screen shakes Game Mode
slightly.
xGame Mode TV is not available when the input source is set to .
xAfter connecting the game console, set to . You Game Mode On
may notice slightly reduced picture quality.
Program Rating Lock
The feature lets you block programs you've Program Rating Lock
determined are inappropriate for your children based on the program's
ratings. To access the feature and make any Program Rating Lock
changes, you must enter a PIN (personal identification number). To
watch a blocked program, you must also enter the same PIN.
✎Program Rating Lock HDMI Component is not available in or
mode.
✎The default PIN number of a new TV set is “0-0-0-0”. You can set
your own PIN using the function.Change PIN
How It Works
When you access the Menu functions for the Program Rating Lock
first time, the PIN input screen appears. Enter 0-0-0-0. The PIN screen
closes and the Menu appears. Every time you Program Rating Lock
access the functions, the PIN screen will appear Program Rating Lock
and you must enter a PIN.
When the screen appears, select Program Rating Lock Program
Rating Lock, and then press ENTER
E
. Select , and then press the On
ENTER
E
key again. Depending on what type of programs or movies
you want to block, select one of the options on the screen, and then
press the ENTER
E
button. The options are listed below:
■
TV Parental Guidelines: You can block TV programs based on their
ratings. This function allows you to control what your children are
watching.
■
MPAA Rating: You can block movies based on their MPAA ratings.
The Motion Picture Association of America (MPAA) has implemented
a rating system that provides parents or guardians with advanced
information on which films are appropriate for children.
■
Canadian English: You can block TV programs based on their
Anglophone Canadian ratings.
■
Canadian French: You can block TV programs based on their French
Canadian ratings.
■
Downloadable U.S. Rating: You can use parental restriction
information while watching DTV channels.
Locking/Blocking Programs or Movies
You lock or block programs and/or movies in essentially the same way
for each option. Each option displays a grid or table. All the tables have
ratings listed on the left. The TV Parental Guidelines option also has
kinds of content listed across the top: : Lock all TV ratings. / : ALL FV
Fantasy violence / : Violence / : Sexual situation / : Adult Language / V S L
D: Sexually Suggestive Dialog.
To lock/block movies or shows with certain ratings and/or kinds of
content, click the square next to the rating and/or under the kind of
content. A lock appears. To unlock/unblock, click the square again.
When you click a low rating, all the ratings above it will also display locks.
You can also Allow All or Lock All. When done, press the RETURN
button on your remote.
■
Change PIN: The Change PIN screen will appear. Choose any 4
digits for your PIN and enter them in fields. Re-enter Enter New PIN
the same 4 digits in fields. When the Change PIN Confirm New PIN
screen disappears, press the button. The TV has memorized your OK
new PIN.
✎If you forget the PIN, press the remote-control buttons in the
following sequence, which resets the pin to “0-0-0-0” : (off) POWER
→ →→→→ MUTE 8 2 4 (on)POWER
Caption
(On-Screen Text Dialogue)
■
Caption: You can switch the caption function on or off. If captions are
not available, they will not be displayed on the screen.
✎The feature does not work in or mode.Caption Component HDMI
■
Caption Mode: You can select the desired caption mode.
Default / CC1~CC4 / Text1~Text4: (analog channels only) The
Analog Caption function operates in either analog TV channel mode
or when a signal is supplied from an external device to the TV.
(Depending on the broadcasting signal, the Analog Caption function
may or may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (Digital
channels only) The Digital Captions function works with digital
channels.
✎Service1~6 may not be available in digital caption mode depending
on the broadcast.
■
Digital Caption Options: (Digital channels only)
Size: Options include Default, Small, Standard and Large. The default
is Standard.
Font Style: Options include Default and Styles 0 to 7. The default is
Style 0.
Foreground Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the color of
the letters. The default is White.
Background Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the
background color of the captions. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options include
Default, Transparent, Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity of the caption
background. Options include Default, Transparent, Translucent, Solid
and Flashing.
Return to Default: This option sets each Size, Font Style, Foreground
Color, Background Color, Foreground Opacity and Background
Opacity to its default.
✎Digital Caption Options are available only when you can select
Default Service1 ~ Service6 Caption Mode and in .
✎The Foreground and Background cannot be set to the same color.
Melody
Set so that a melody plays when the TV is turned on or off.
✎The does not play:Melody
xWhen no sound is output from the TV because the button MUTE
has been pressed.
xWhen no sound is output from the TV because the volume has
been reduced to minimum with the button.VOL –
xWhen the TV is turned off by function.Sleep Timer
Eco Solution
■
Energy Saving : Lets you adjust the brightness of the TV to reduce
power consumption. If you select , the screen is turned off, Picture Off
but the sound remains on. Press any button except the volume button
to turn on the screen.
■
Eco Sensor for 5 series : To enhance your power savings, the
picture settings automatically adapt to the light in the room.
✎If you adjust the , the will be set to .Backlight Eco Sensor Off
Min. Backlight Eco Sensor On: When is , the minimum screen
brightness can be adjusted manually.
✎If is , the display brightness may change (become Eco Sensor On
slightly darker in most cases) depending on the surrounding light
intensity.
■
No Signal Power Off: Sets how quickly the TV switches to standby
mode if no picture is being received.
✎Disabled when an attached PC is in power saving mode.
■
Auto Power Off: The TV will automatically turn off when no user
operation is detected for 4 hours.
Auto Protection Time
If a still image remains on the screen for an amount of time you define,
the screen saver is activated to prevent the formation of ghost images
on the screen.
Support Menu
Self Diagnosis
■
Picture Test: Use to check for picture problems. If the problem
appears in the test picture, select and follow the directions on Yes
the screen.
■
Sound Test: Use the built-in melody to check for sound problems.
If the problem occurs during the test, select and follow the Yes
directions on the screen.
■
Signal Strength: (Digital channels only) An HD channel’s reception
quality is either perfect or the channels are unavailable. Adjust your
antenna to increase signal strength.
■
Reset: Reset all settings to the factory defaults.
✎The PIN input screen appears before the setup screen.
✎Enter your 4-digit PIN. Change the PIN using the Change PIN
option.
Software Upgrade
Software Upgrade can be performed by downloading the latest
firmware from samsung.com to a USB memory device.
HD Connection Guide
Refer to this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you
want to upgrade the software. You can find information regarding our call
centers and how to download products and software.
Media Play
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
MEDIA.P
Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music, and/or movie files to
the jack on the back of the TV. A pop up window appears.USB
3. Press the MEDIA.P button on your remote. The menu Media Play
appears.
Using the Media Play Menu
To open in the Menu, follow these steps:Media Play
1. Application on the left, and then press the ENTER
E
button.
2. Media Play (USB)Press the or button to select ▲ ▼ , and then
press the ENTER
E
button.
3. Videos, Music, Photos, Press the or button to select an icon (◄ ►
Settings), and then press the ENTER
E
button.
✎Media Play might not work properly with unlicensed multimedia
files.
✎Need-to-Know List before using Media Play (USB)
xSupported file systems are FAT and NTFS.
xCertain types of USB Digital camera and audio devices may not
be compatible with this TV.
xMedia Play only supports USB Mass Storage Class (MSC)
devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV’s USB
port. USB HDD is not supported.
xBefore connecting your device to the TV, please back up your files
to protect them from damage or loss of data. SAMSUNG is not
responsible for any data file damage or data loss.
xA USB device that requires high power (more than 0.5A) may not
be supported.
xDo not disconnect the USB device while it is loading.
xThe higher the resolution of the image, the longer it takes to
display on the screen.
xIf a file is corrupted or the TV does not support the file type, the
“Not Supported File Format” message appears.
Figures and illustrations in this User Manual are provided for reference
only and may differ from actual product appearance. Product design and
specifications may be changed without notice.
Important Warranty Information Regarding
Television Format Viewing
✎See the warranty card for more information on warranty terms.
Wide screen format LED Displays with aspect ratios of 16:9 (the ratio of
the screen width to screen height) are primarily designed to display wide
screen format full-motion video. The images displayed on them should
primarily be in the wide screen 16:9 ratio format, or expanded to fill the
screen if your model offers this feature and the images are constantly
moving. Displaying stationary graphics and images on screen, such as
the dark sidebars on non- expanded standard format television video
and programming, should be limited to no more than 5% of the total
television viewing per week. Additionally, viewing other stationary images
and text such as stock market crawls, video game displays, station
logos, web sites or computer graphics and patterns, should be limited
as described above for all televisions. Displaying stationary images that
exceed the above guidelines can cause uneven aging of LED Displays
that leave subtle, but permanent burned-in ghost images in the LED
picture. To avoid this, vary the programming and images, and primarily
display full screen moving images, not stationary patterns or dark bars.
On LED models that offer picture sizing features, use these controls to
view different formats as a full screen picture. Be careful in the selection
and duration of television formats you use for viewing. Uneven LED aging
as a result of format selection and use, as well as burned-in images, are
not covered by your Samsung limited warranty.
ySAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY
STATEMENT
Subject to the requirements, conditions, exclusions and limitations
of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions and
limitations contained herein, SAMSUNG will additionally provide Warranty
Repair Service in the United States on SAMSUNG products purchased
in Canada, and in Canada on SAMSUNG products purchased in the
United States, for the warranty period originally specified, and to the
Original Purchaser only.
The above described warranty repairs must be performed by a
SAMSUNG Authorized Service Center. Along with this Statement and
the Original Limited Warranty Statement, a dated Bill of Sale as Proof
of Purchase must be presented to the Service Center. Transportation
to and from the Service Center is the responsibility of the purchaser.
Conditions covered are limited only to manufacturing defects in material
or workmanship, and only those encountered in normal use of the
product. Exclusions include, but are not limited to, any originally specified
provisions for in-home or on-site services, minimum or maximum repair
times, exchanges or replacements, accessories, options, upgrades, or
consumables.
For the location of a SAMSUNG Authorized Service Center, please call
toll-free:
– In the United States : 1-800-SAMSUNG (1-800-726-7864)
– In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image
elements (such as TV channel logos, TV shows or movies in panorama
or 4:3 format, stock or news scroll bars, etc.) on the screen. The
constant display of still pictures can cause ghosting or image burn-in
(image retention) on the LED screen, which will affect image quality. To
reduce the risk of this effect, please follow the recommendations below:
yAvoid displaying the same TV channel for long periods.
yAlways try to display any image in full screen mode. Use the TV's
Picture Options menu to select the optimal screen size.
yReduce brightness and contrast values to the minimum required to
achieve the desired picture quality. Values that exceed the minimum
may speed up the burn-in process.
yFrequently use all TV features designed to reduce image retention and
screen burn-in. Refer to proper user manual section for details.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please
contact the SAMSUNG customer care center.
Country CANADA U.S.A
Address
Samsung Electronics
Canada Inc.,
Customer Service
55 Standish Court
Mississauga
Ontario L5R 4B2 Canada
Samsung Electronics
America, Inc.
85 Challenger Road
Ridgefield Park, NJ 07660
Customer Care
Center 1-800-SAMSUNG (726-7864)
Web Site
www.samsung.com/ca
(English)
www.samsung.com/ca_fr
(French)
www.samsung.com
LED TV
user manual
© 2013 Samsung Electronics Co., Ltd. All rights reserved.
BN68-04801A-01
- 2 -- 1 -
- 6 -- 5 -
- 3 -
- 7 -
- 4 -
- 8 -
UF4000_5000_ZA_BN68-04801A-ENG_ENG-US.indd 1 2013-01-22 6:49:15
xThe TV cannot play MP3 files with DRM that have been
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and interests
of content providers, preventing illegal copying of contents, and
managing billing and settlements.
xPTP devices are not supported.
xIf an over-power warning message is displayed while you are
connecting or using a USB device, the device may not be
recognized or may malfunction.
xIf the TV has no input during the time period set in Auto
Protection Time, the Screensaver will run.
xThe power-saving mode of some external hard disk drives may be
released automatically when you connect them to the TV.
xIf you use a USB extension cable, the TV may not recognize the
USB device or may not be able to read the files on the device.
xIf a USB device connected to the TV is not recognized, the list of
files on the device is corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device, and check
the connection.
xIf a file you deleted from the PC is still found when you run Media
Play, use the “Empty the Recycle Bin” function on the PC to
permanently delete the file.
xPhotos only supports the sequential jpeg format.
xThe Videos option does not support the scene search and
thumbnail functions.
xIf the number of files and folders saved on a USB storage device is
over approximately 4000, the files and folders may not appear and
some folders may not open.
xThe maximum number of files the TV can display, including sub
folders, in one folder of a USB storage device is 2000.
xThe media may not play smoothly if you use a USB device rated
lower than USB 2.0.
Videos
1. Media Play VideosIn the menu, press the or button to select ◄ ► ,
and then press the ENTER
E
button.
2. Press the buttons to select a video in the file list.◄/►/▲/▼
3. Press the ENTER
E
button or
(Play) button.
- The file name is displayed on the top of the screen with the playing
time.
- If video time information is unknown, playing time and the progress
bar are not displayed.
- During video playback, you can search using the and ◄ ►
buttons.
✎In this mode, you can play movie clips contained in a game, but you
cannot play the game itself.
ySupported Subtitle Formats
- External
Name File extension
MPEG-4 timed text .ttxt
SAMI .smi
SubRip .srt
SubViewer .sub
Micro DVD .sub or .txt
SubStation Alpha .ssa
Advanced SubStation Alpha .ass
- Internal
Name Container Format
Xsub Picture FormatAVI
SubStation Alpha MKV Text Format
Advanced SubStation Alpha MKV Text Format
SubRip MKV Text Format
MPEG-4 Timed text MP4 Text Format
ySupported Video Formats
File
Extension Container ResolutionVideo Codec Frame
rate (fps)
Bit rate
(Mbps)
Audio
Codec
*.mp4 MP4
Divx3.11/4.x/
5.1/6.0 1920x1080 6~30 30Mbps
MP3 /
ADPCM /
AAC
H264 1920x1080 6~30 30Mbps
AVC 1920x1080 6~30 30Mbps
MJPEG 640x480 6~30 10Mbps
"*.avi
*.mkv"
"AVI
MKV"
Divx3.11/4.x/
5.1/6.0 1920x1080 6~30 30Mbps "MP3 /
AC3 /
LPCM /
ADPCM
/ DTS
Core"
MPEG4 SP/
ASP 1920x1080 6~30 30Mbps
H264 1920x1080 6~30 30Mbps
MJPEG 640x480 6~30 10Mbps
"*.asf
*.wmv" ASF
Divx
3.11/4.x/
5.1/6.0
1920x1080 6~30 30Mbps
"MP3 /
AC3 /
LPCM /
ADPCM
/ WMA
/ WMA
Pro"
MPEG4 SP/
ASP 1920x1080 6~30 30Mbps
H.264 1920x1080 6~30 30Mbps
"*.ts
*.trp
*.tp
*.m2ts"
TS
MPEG2 1920x1080 6~30 30Mbps AC3 /
AAC /
MP3 /
DD+ /
HE-AAC
H. 264 BP/
MP/HP 1920x1080 6~30 30Mbps
"*.dat
*.mpg
*.mpeg
*.vob"
PS
MPEG1 1920x1080 24/25/30 30Mbps AC3 /
MPEG /
LPCM /
AAC
MPEG2 1920x1080 24/25/30 30Mbps
H. 264 BP/
MP/HP 1920x1080 6~30 30Mbps
*.3gp 3GPP
MPEG4 SP/
ASP 1920x1080 6~30 30Mbps MP3
H.264 1920x1080 6~30 30Mbps
*.flv flash
formats
H.264 1920x1080 6~30 30Mbps
MP3
Sorenson
H.263 1920x1080 6~30 30Mbps
Other Restrictions
yVideo content will not play, or not play correctly, if there is an error in
the content or the container.
ySound or video may not work if the contents have a standard bit rate/
frame rate above the compatible Frame/sec listed in the Supported
Video Formats table.
yIf the Index Table contains an error, the Seek (Jump) function will not
work.
yThe menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
yVideo content may not be play if there is too much content in one file.
Video Decoder
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not
supported.
MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
– Above 1280 x 720: 30 frame max
H.263 is not supported.
GMC is not support.
Audio Decoder
Supports up to WMA7, 8, 9 STD, 9 PRO, and 10 PRO
WMA 9 PRO and WMA 10 PRO support 5.1 channel.
(LBR mode of WMA Pro is not supported.)
WMA Lossless is not supported.
Music
1. Media Play MusicIn the menu, press the buttons to select ◄/► ,
and then press the ENTER
E
button.
2. Press the buttons to select the desired Music in the file ◄/►/▲/▼
list.
3. Press the ENTER
E
button or
(Play) button.
✎During music playback, you can search using the buttons.◄/►
✎
(REW) and
µ
(FF) buttons do not function during play.
✎Media Play only displays files with MP3 file extensions. Other file
extensions are not displayed, even if they are saved on the same
USB device.
✎If the sound is abnormal when playing MP3 files, adjust the
Equalizer Sound in the menu. (An over-modulated MP3 file may
cause a sound problem.)
Photos
1. Media Play PhotosIn the menu,, press the or button to select ◄ ► ,
then press the ENTER
E
button.
2. Press the / / / buttons to select a photo in the file list.◄►▲▼
3. Press the ENTER
E
button or
(Play) button.
✎NOTE
xWhile a photo list is displayed, press the
(Play) / ENTER
E
button on the remote control to start a slide show.
xAll files in the file list section will be displayed in the slide show.
xDuring the slide show, files are displayed in order.
xDuring the slide show, you can adjust the slide show speed using
( ) (REW) or ( ) (FF) button.µ
xYou can move to other files using the or button.◄ ►
xMedia Play can play Music files automatically during a Slide Show
if is set to .Background Music On
xYou cannot change the in until the Mode Background Music
Background Music file has finished loading.
ySupported Photo Formats
Image Photo Resolution
JPEG Base-line 15360 x 8704
Progressive 1024 x 768
Other Restrictions
yCMYK and YCCK color space JPEGs are not supported.
Playing Multiple Files
■
Playing selected video/music/photo files
1. On the File List screen, highlight a file, and then press the Yellow
button on your remote.
2. Repeat Step 1 to select multiple files.
✎NOTE
xA
c
mark appears to the left of the selected files.
xTo cancel a selection, press the Yellow button again.
xTo deselect all selected files, press the button, select TOOLS
Deselect All, and then the ENTER
E
button.
3. Play Selected ContentsPress the TOOLS button, select , and then
press the ENTER
E
button.
■
Playing a video/music/photo folder
1. With the folders on your USB device displayed, use the ◄/►/▲/▼
buttons to highlight a folder.
2. Play FolderPress the TOOLS button, select , and then press the
ENTER
E
button.
Media Play - Additional Functions
■
Videos/Music/Photos Play Option menus
When playing a file, press the button.TOOLS
Category Operation Videos Music Photos
Title You can select another video file
to play directly.
c
Repeat Mode You can play movie and music
files repeatedly.
c c
Picture Size You can adjust the picture size to
your preference.
c
Picture Mode You can adjust the picture
setting.
c c
Sound Mode You can adjust the sound setting.
c c c
Subtitle Setting
You can play the video with
Subtitles. This function only
works if the subtitles have the
same file name as the video.
c
Audio Format You can select the digital audio
output format.
c
Audio Language
You can change the audio
language if the video has more
than one language.
c
Stop Slide Show /
Start Slide Show
You can start or stop a Slide
Show.
c
Slide Show Speed You can select the slide show
speed during the slide show.
c
Background Music
You can set and select
background music when
watching a Slide Show.
c
Zoom You can zoom into images in full
screen mode.
c
Rotate You can rotate images in full
screen mode.
c
Information You can see detailed information
about the played file.
c c c
Settings
Using the Setup Menu
■
DivX® Video On Demand : Shows the registration code authorized
for the TV. If you connect to the DivX web site and register with the
10-digit registration code, you can download the VOD activation file.
Once you run the file using Media Play, the registration is completed.
✎For more information on DivX® VOD, visit “http://vod.divx.com”.
■
Information: Select to view information about the connected USB
device.
Other Information
Preparing before installing Wall-Mount
for 46", 50" models
To install a wall-mount from another manufacturer, use the Holder-Ring.
✎The product shape may differ
depending on the model.
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the
wall.
For detailed information about installing the wall mount, see the
instructions provided with the wall mount kit. Contact a technician for
assistance when installing the wall mount bracket. Samsung Electronics
is not responsible for any damage to the product or injury to yourself or
others if you elect to install the wall mount on your own.
Sound Problem Sound TestPerform the to confirm your TV's audio is working properly.
(Go to - MENU Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too low at
maximum volume.
Check the volume control of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.
The picture is good but there is no sound. yIf you are using an external device, check the device’s audio output option. Ex. You may need to change your cable box's
audio option if you have the cable box's audio output connected to your TV using an HDMI cable.
yReboot the connected device by unplugging and then reconnecting the device's power cable.
The speakers are making an inappropriate
noise.
yCheck the cable connections. Make sure a video cable is not connected to an audio input.
yFor Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
yPerform the Sound Test as explained above.
No Picture, No Video
The TV will not turn on. yMake sure the AC power cord is securely plugged into the wall outlet and the TV.
yMake sure the wall outlet is working.
yTry pressing the button on the TV to make sure the problem is not caused by the remote. POWER
If the TV turns on, refer to ‘Remote control does not work’ below.
The TV turns off automatically. yEnsure the is set to in the menu.Sleep Timer Off Time
yIf your PC is connected to the TV, check your PC power settings.
yMake sure the AC power cord is plugged into the wall outlet and TV securely.
yWhen you are watching a TV connected to an antenna or to a cable connection, the TV will turn off after 10 - 15 minutes if
there is no signal.
There is no picture/video. yCheck the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
ySet your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For
example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
yMake sure your connected devices are powered on.
yBe sure that the TV is set to the correct source by pressing the button on the remote control.SOURCE
yReboot the connected device by unplugging and then reconnecting the device's power cable.
RF(Cable/Antenna) Connection
The TV is not receiving all channels. yMake sure the coaxial cable is connected securely.
yRun to add available channels to the channel list. Auto Program
Go to - - then select and make sure the correct Cable TV signal type is set in the MENU Channel Auto Program Auto
menu. There are 3 options. ( , , and )STD HRC IRC
yVerify the antenna is positioned correctly.
No Caption on digital channels. yCheck the Caption Setup menu. Try changing to .Caption Mode Service1 CC1
ySome channels may not have caption data.
The picture is distorted: macroblock, error,
small block, dots, pixelization.
yCompression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action
movies.
yA weak signal can cause picture distortion. This is not a TV problem.
Others
Purple/green rolling horizontal bars and
buzzing noise from the TV speakers with
Component cable connection.
yRemove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-top-box
has a grounding issue. Replace the Component video cables with an HDMI connection.
The picture will not display in full screen. yHD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
yBlack bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.
yAdjust the picture size option on your external device or change the TV to full screen.
The remote control does not work. yReplace the remote control batteries. Make sure you install the new batteries with their polarity (+/-) correct.
yClean the transmission window located on the top of the remote control.
yTry pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume.
Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the
SAMSUNG TV code.
A “ ” message Mode Not Supported
appears.
Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to resolution
settings in this manual.
Caption on the TV menu is greyed out. yYou cannot select in the TV menu when watching content from a device connected via HDMI or Component.Caption
yCaption must be activated on the external device.
There is a plastic smell from the TV. This smell is normal and will dissipate over time.
TV is unavailable in the Signal Strength
Self Diagnosis Test menu.
This function is only available for digital channels received through an Antenna/RF/Coax connection.
TV is tilted to the right or left side. Remove the stand base from the TV and reassemble it.
The menu is greyed out Channel
(unavailable).
The menu is only available when you select the TV source. Channel
Your settings are lost after 30 minutes or
every time the TV is turned off.
If TV is in the mode, it will reset audio and picture settings every 30 minutes. Please change from mode Store Demo Store Demo
to mode using the procedure. Press the button to select TV mode, go to Home Use Plug & Play SOURCE MENU →Setup →
Plug & Play →ENTER
E
.
You have intermittent loss of audio or video. Check the cable connections and reconnect them.
Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term
use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
You see small particles when you look
closely at the edge of the frame of the TV.
This is part of the product’s design and is not a defect.
POP (TV’s internal banner ad) appears on
the screen.
Select under mode. For details, refer to (Initial Setup).Home Use Plug & Play Plug & Play
✎This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or
dark pixels on the screen. These pixels will have no impact on the performance of the product.
✎You can watch detailed troubleshooting videos at www.samsung.com/spsn.
✎Some functions and pictures shown in this manual are available on specific models only.
✎You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com Support). To →
upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick, insert the USB memory stick into the TV's USB
slot, and then select Support > Software Upgrade in the TV's menu.
Storage and Maintenance
✎If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching the TV.
✎The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to
prevent scratches.
Do not spray water directly onto the
product. Any liquid that goes into the
product may cause a failure, fire, or electric
shock.
Clean the product with a soft cloth
dampened with in a small amount of water.
Do not use a flammable liquid (e.g. benzene,
thinners) or a cleaning agent.
License
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit
divx. com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com
for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX
Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467,
7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered
trademarks & DTS Premium Sound is a trademark of DTS, Inc.
©2012 DTS, Inc. All Rights Reserved.
Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477, 5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152,
5,912,976, 7,200,236, 7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the Symbol, and DTS and the Symbol
together are registered trademarks & DTS Studio Sound is a trademark of DTS, Inc.
©2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License Notice is written only English.
To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.request@samsung.com).
This product uses some software programs which are distributed under the Independent JPEG Group.
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1995-2008 International Business Machines Corporation and others All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright
notice(s) and this permission notice appear in supporting documentation.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software
without prior written authorization of the copyright holder.
All trademarks and registered trademarks mentioned herein are the property of their respective owners.
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C )
5% to 95%, non-condensing
Model Name UN19F4000 UN22F5000
Display Resolution 1366 x 768 1920 x 1080
Screen Size
(Diagonal)
19" Class
(18.5" measured diagonally)
22" Class
(21.5" measured diagonally)
Sound
Output 3W x 2
Dimensions (W x H x D)
Body
With stand
17.8 X 11.0 X 1.9 inches
(453.7 X 281.3 X 49.5 (mm))
17.8 X 12.3 X 4.9 inches
(453.7 X 314.2 X 124.9 (mm))
20.2 X 12.6 X 1.7 inches
(513.1 X 321.5 X 43.8 (mm))
20.2 X 14.4 X 6.6 inches
(513.1 X 366.5 X 169.6 (mm))
Weight
Without Stand
With Stand
5.5 lbs (2.5 kg)
5.7 lbs (2.6 kg)
5.7 lbs (2.6 kg)
6.3 lbs (2.9 kg)
Model Name UN32F4000 UN32F4050 UN32F5000 / UN32F5050
Display Resolution 1366 x 768 1920 x 1080
Screen Size
(Diagonal)
32" Class
(31.5" measured diagonally)
32" Class
(31.5" measured diagonally)
Sound
Output 10W x 2
Dimensions (W x H x D)
Body
With stand
29.0 X 17.1 X 1.9 inches
(737.9 X 435.8 X 49.5 (mm))
29.0 X 20.0 X 7.5 inches
(737.9 X 509.1 X 191.7 (mm))
29.0 X 17.1 X 1.9 inches
(737.9 X 435.8 X 49.5 (mm))
29.0 X 19.1 X 9.9 inches
(737.9 X 487.0 X 252.6 (mm))
29.0 X 17.5 X 1.9 inches
(738.0 X 445.4 X 49.0 (mm))
29.0 X 19.9 X 7.5 inches
(738.0 X 505.8 X 191.7 (mm))
Weight
Without Stand
With Stand
11.4 lbs (5.2 kg)
12.5 lbs (5.7 kg)
11.4 lbs (5.2 kg)
12.3 lbs (5.6 kg)
11.0 Ibs (5.0 kg)
12.3 Ibs (5.6 kg)
Model Name UN40F5000 / UN40F5050 UN46F5000 / UN46F5050 UN50F5000 / UN50F5050
Display Resolution 1920 x 1080
Screen Size
(Diagonal)
40” Class
(40.0" measured diagonally)
46" Class
(45.9" measured diagonally)
50" Class
(49.5" measured diagonally)
Sound
Output 10W x 2
Dimensions (W x H x D)
Body
With stand
36.5 X 21.7 X 1.9 inches
(928.2 X 552.3 X 49.4 (mm))
36.5 X 24.1 X 9.2 inches
(928.2 X 612.2 X 235.0 (mm))
41.7 X 24.6 X 1.9 inches
(1059.6 X 626.2 X 49.4 (mm))
41.7 X 27.0 X 9.2 inches
(1059.6 X 686.1 X 235.0 (mm))
44.7 X 26.2 X 1.9 inches
(1135.4 X 668.0 X 49.8 (mm))
44.7 X 28.6 X 9.2 inches
(1135.4 X 727.9 X 235.0 (mm))
Weight
Without Stand
With Stand
17.6 Ibs (8.0 kg)
20.9 Ibs (9.5 kg)
23.8 Ibs (10.8 kg)
27.1 Ibs (12.3 kg)
28.6 Ibs (13.0 kg)
31.9 Ibs (14.5 kg)
✎Design and specifications are subject to change without prior notice.
✎This device is a Class B digital apparatus.
✎For information about your TV's power requirements and more about power consumption, refer to the label attached to the product.
✎Typical power consumption is measured according to Energy Star Program requirements for televisions.
✎Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/
recyclingdirect or call, (877) 278-0799.
Wall Mount Kit Specifications (VESA)
✎The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. If you
are attaching the wall mount to a wall made of building materials other
than drywall, please contact your nearest dealer for information about
the appropriate mounting hardware. If you install the TV on a ceiling or
slanted wall, it may fall and result in severe personal injury.
✎NOTE
xStandard dimensions for wall mount kits are shown in the table
below.
xWhen purchasing our wall mount kit, a detailed installation manual
and all parts necessary for assembly are provided.
xDo not use screws that do not comply with the VESA standard
screw specifications.
xDo not use screws that are longer than the standard dimension
or do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
TV set.
xFor wall mounts that do not comply with the VESA standard screw
specifications, the length of the screws may differ depending on
the wall mount specifications.
xDo not fasten the screws too firmly. This may damage the product
or cause the product to fall, leading to personal injury. Samsung is
not liable for these kinds of accidents.
xSamsung is not liable for product damage or personal injury when
a non-VESA or non-specified wall mount is used or the consumer
fails to follow the product installation instructions.
xDo not mount the TV at more than a 15 degree tilt.
xAlways have two people mount the TV on a wall.
Product
Family
TV size in
inches
VESA screw hole specs
(A * B) in millimeters
Standard
Screw Quantity
LED-TV
19~22 75 X 75
M4
4
26-28 100 X 100
32-42 200 X 200
M8
46~60 400 X 400
Do not install your Wall Mount Kit while your
TV is turned on. It may result in personal
injury due to electric shock.
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may
cause the TV to fall. In particular, ensure that your children
do not hang over or destabilize the TV. Doing so may cause
the TV to tip over, resulting in serious injuries or death.
Follow all safety precautions provided on the included
Safety Flyer. For added stability, install the anti-fall device for
safety purposes, as described below.
To prevent the TV from falling
✎TV Holder kits are sold separately. To purchase a TV Holder kit,
contact Samsung Customer Care.
1. Insert the screws into the wall brackets and firmly fasten them to the
wall. Make sure the screws are firmly fixed to the wall.
✎We strongly recommend you drive the screws into a stud.
2. Insert the screws through the TV brackets, and then fasten the
screws to the top VESA screw holes on the back of the TV.
3. Connect the brackets on the TV and the brackets on the wall with a
strong string or cable, and then tie the string or cable tightly to the
brackets.
✎Verify all connections are properly secured. Periodically check the
connections for any sign of fatigue or failure. If you have any doubt
about the security of your connections, contact a professional
installer.
✎Install the TV close to the wall so that it does not fall.
✎Connect the string or cable so that the brackets on the wall are at
the same height or lower than the brackets on the TV. Untie the
string or cable before moving the TV.
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used
to physically fix the system when using it in a public place. Refer to the
manual provided with the Kensington Lock for additional information on
proper use.
✎Please find a “
K
” icon on the rear of the TV. The Kensington slot is
beside the “
K
” icon.
✎The position and color may differ depending on the model.
Assembling the Stand Wire Holder
for 32" and above models
Display Modes (HDMI/DVI Input)
Optimal resolution
4 series:1366 x 768@60Hz / 5 series: 1920 x 1080@60Hz
Mode Resolution
Horizontal
Frequency
(KHz)
Vertical
Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync
Polarity
(H / V)
1366 x
768
1920 x
1080
IBM 720 x 400 31.469 70.087 28.322 -/+
c c
MAC
640 x 480 35.000 66.667 30.240 -/-
c c
832 x 624 49.726 74.551 57.284 -/-
c c
1152 x 870 68.681 75.062 100.000 -/-
c
VESA DMT
640 x 480 31.469 59.940 25.175 -/-
c c
640 x 480 37.861 72.809 31.500 -/-
c c
640 x 480 37.500 75.000 31.500 -/-
c c
800 x 600 37.879 60.317 40.000 +/+
c c
800 x 600 48.077 72.188 50.000 +/+
c c
800 x 600 46.875 75.000 49.500 +/+
c c
1024 x 768 48.363 60.004 65.000 -/-
c c
1024 x 768 56.476 70.069 75.000 -/-
c c
1024 x 768 60.023 75.029 78.750 +/+
c c
1152 x 864 67.500 75.000 108.000 +/+
c
1280 x 720 45.000 60.000 74.250 +/+
c c
1280 x 800 49.702 59.810 83.500 -/+
c
1280 x 1024 63.981 60.020 108.000 +/+
c
1280 x 1024 79.976 75.025 135.000 +/+
c
1366 x 768 47.712 59.790 85.500 +/+
c c
1440 x 900 55.935 59.887 106.500 -/+
c
1600 x 900RB 60.000 60.000 108.000 +/+
c
1680 x 1050 65.290 59.954 146.250 -/+
c
1920 x 1080 67.500 60.000 148.500 +/+
c
Caution of the cover-jack
CAUTION: These servicing instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock or fire hazard, do not perform any servicing
other than that contained in the operating instructions
unless you are qualified to do so.
Cover-jack
TV Rear Panel
✎The product shape may differ depending on the model.
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems and solutions. If none of these troubleshooting tips apply, visit samsung.
com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.
Problem Possible Solution
Flickering and Dimming If your Samsung television is flickering or dimming sporadically, you may need to disable some of its energy efficient features
like the or the feature. Using your remote, follow the steps below to turn these features off or Eco Sensor Energy Saving
on.
yEnergy Saving Setup Eco Solution Energy Saving : MENU → → →
yEco Sensor Setup Eco Solution Eco Sensor : MENU → → → for 5 series
Component Connections /
Screen Color
If you find that the color on your Samsung television’s screen is not correct or black and white, first run a test Self Diagnosis
on the TV to make sure there are no device issues.
ySelf Diagnosis Support Self Diagnosis Picture Test : MENU → → →
If the test is ok, try making sure:
yYour connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have used the
AV Out jack on your video source.
yTry making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled Pb, Pr,
and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video source to the
blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV, etc.
Screen Brightness If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings you
should check before calling for a repair.
yBacklight Contrast Brightness Sharpness Color Tint (G/R) Picture, , , , , and so on. Go to “ ” on the User Menu, and then
try adjusting these options.
Unwanted Powering off If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco friendly No
Signal Power Off feature.
First make sure your is not accidentally set. The Sleep Time allows you the comfort of falling asleep with the TV Sleep Timer
still on but, turns it off after a certain period of time so as not to waste energy.
ySleep Timer Setup Time Sleep Timer : MENU → → →
If the Sleep Timer is not activated, you may have engaged the or feature.No Signal Power Off Auto Power Off
yNo Signal Power Off Setup Eco Solution No Signal Power Off : MENU → → →
yAuto Power Off Setup Eco Solution Auto Power Off : MENU → → →
Trouble Powering On Before you turn the TV on, find the red light on the right or left bottom of your TV. Press the power on button on the
TV or remote and the light should blink about 5 times before the TV turns on.
If you find that you are having trouble powering on your Samsung television, there are a number of things to check before
making a call to the service department.
yIf you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you press the
power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your keyboard or move the
mouse. Then try turning your TV on.
If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If you have
a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a signal. To test the
signal output of your cable or satellite box, press the guide or info button on the cable or satellite box remote control. If the
screen displays the guide or info data, the problem is caused by the box.
Stand Assembly If you have any trouble assembling the stand, refer to "Install the Stand" in the Start Up or Stand Installation Guide.
Cannot find channel Re-run plug and play.
Poor picture Picture TestFirst, perform the and to see if your TV is properly displaying the test image.
Go to - - - MENU Support Self Diagnosis Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as good as it
did in the store.
If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high
definition) picture quality.
Cable/Satellite subscribers: Try HD channels from the channel line up.
Air/Cable Antenna connection: Try HD channels after running Auto program.
✎Many HD channels broadcast SD contents upscaled to HD. The picture quality of upscaled SD content is low.
yAdjust the Cable/Set top box video output resolution to 1080i or 720p.
The picture is distorted: macroblock error,
small block, dots, pixelization.
yCompression of video contents may cause picture distortion, especially on fast moving pictures such as pictures from
sports and action movies.
yA weak signal can cause picture distortion. This is not a TV problem.
yMobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
Color is wrong or missing. If you’re using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or
loose connections may cause color problems or a blank screen.
There is poor color or brightness. yAdjust the Picture options in the TV menu. (Go to )Picture Mode / Color / Brightness / Sharpness
yAdjust the option in the TV menu. (Go to - - - )Energy Saving MENU Setup Eco Solution Energy Saving
yTry resetting the picture to view the default picture setting. (Go to - )MENU Picture - Picture Reset
There is a dotted line on the edge of the
screen.
yIf the picture size is set to , change it to 16:9.Screen Fit
yChange the cable/satellite box resolution.
The picture is black and white. yIf you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component input 1 on the
TV.
When changing channels, the picture
freezes or is distorted or delayed.
yIf the TV is connected to a cable box, reset the cable box. (Disconnect and then reconnect the box's AC cord and wait until
the cable box reboots. It may take up to 20 minutes.)
ySet the output resolution of the cable box to 1080i or 720p.
JACK PANEL DETAIL / REAR VIEW
■
UN19F4000 / UN22F5000
(Unit:
inches
)
Model name 1 2 3 4 5 6
UN19F4000 3.0 3.1 3.1 6.9 2.9 2.9
UN22F5000 4.4 4.4 2.6 8.2 2.9 2.9
■
UN32F4000 / UN32F4050 / UN32F5000 / UN32F5050 / UN40F5000 / UN40F5050 / UN46F5000 / UN46F5050 / UN50F5000 / UN50F5050
(Unit:
inches
)
Model name 1 2 3 4 5 6
UN32F4000 / UN32F4050 7.7 4.7 4.4 19.0 7.8 7.8
UN32F5000 / UN32F5050 7.8 4.8 4.0 19.1 7.8 7.8
UN40F5000 / UN40F5050 9.8 6.9 6.2 24.4 7.8 7.8
UN46F5000 / UN46F5050 12.1 6.4 6.9 30.1 15.7 15.7
UN50F5000 / UN50F5050 14.0 6.8 6.6 32.7 15.7 15.7
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to
performing installation of your TV. Not responsible for typographical or printed errors.
© 2013 Samsung Electronics America, Inc
- 10 -- 9 -
- 14-- 13 -
- 11 -
- 15 -
- 12 -
- 16 -
UF4000_5000_ZA_BN68-04801A-ENG_ENG-US.indd 2 2013-01-22 6:49:22
Product specificaties
| Merk: | Samsung |
| Categorie: | Televisie |
| Model: | UN32F5000AF |
| Kleur van het product: | Zwart |
| Gewicht verpakking: | 7394 g |
| Breedte verpakking: | 919.48 mm |
| Diepte verpakking: | 142.23 mm |
| Hoogte verpakking: | 513.07 mm |
| Gebruikershandleiding: | Ja |
| Bluetooth: | Nee |
| Automatisch uitschakelen: | Ja |
| Beeldschermdiagonaal: | 31.5 " |
| Resolutie: | 1920 x 1080 Pixels |
| Oorspronkelijke beeldverhouding: | 16:9 |
| Ethernet LAN: | Nee |
| Ondersteunde video-modi: | 1080p |
| Meegeleverde kabels: | AC |
| Geïntegreerde geheugenkaartlezer: | Nee |
| Audiosysteem: | DTS Studio Sound |
| Aantal USB 2.0-poorten: | 1 |
| Aantal HDMI-poorten: | 2 |
| Composiet video-ingang: | 1 |
| Componentingang video (YPbPr/YCbCr): | 1 |
| Ingebouwde luidsprekers: | Ja |
| Gemiddeld vermogen: | 20 W |
| Stroomverbruik (in standby): | 0.3 W |
| Vermogensverbruik (max): | 75 W |
| Aantal luidsprekers: | 2 |
| Hoofdtelefoonuitgangen: | 1 |
| Certificering: | ENERGY STAR 6.0 |
| HD type: | Full HD |
| 3D: | Nee |
| Ondersteunde grafische resoluties: | 1920 x 1080 (HD 1080) |
| VESA-montage: | Ja |
| Paneelmontage-interface: | 200 x 200 mm |
| Duurzaamheidscertificaten: | ENERGY STAR |
| Diepte ( zonder voet ): | 48.26 mm |
| Hoogte (zonder voet ): | 444.5 mm |
| Breedte ( zonder voet ): | 739.14 mm |
| Gewicht (zonder voet): | 4990 g |
| On Screen Display (OSD)-talen: | ENG, ESP, FRE |
| Soort tuner: | Analoog & digitaal |
| Formaat digitaal signaal: | ATSC |
| Internet TV: | Nee |
| Breedte apparaat (met standaard): | 739.14 mm |
| Diepte apparaat (met standaard): | 190.5 mm |
| Hoogte apparaat (met standaard): | 505.45 mm |
| Gewicht (met standaard): | 6078 g |
| Beeldverwerkingstechnologie: | Samsung Wide Color Enhancer |
| Ingebouwde subwoofer: | Nee |
| Automatische volumeregelaar: | Ja |
| Aan/uit-timer: | Ja |
| On Screen Display (OSD): | Ja |
| Aantal On Screen Display-talen: | 3 |
| Aantal RF-poorten: | 1 |
| Motion interpolation technologie: | CMR (Clear Motion Rate) 120 |
| Game modus: | Ja |
| Afstandsbediening inbegrepen: | Ja |
| Wifi: | Nee |
| AC-ingangsspanning: | 110 - 120 V |
| AC-ingangsfrequentie: | 60 Hz |
| Stroomverbruik (typisch): | 28 W |
| Batterijen inbegrepen: | Ja |
Heb je hulp nodig?
Als je hulp nodig hebt met Samsung UN32F5000AF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Televisie Samsung
16 April 2024
16 April 2024
16 April 2024
16 April 2024
16 April 2024
16 April 2024
16 April 2024
16 April 2024
16 April 2024
16 April 2024
Handleiding Televisie
- Televisie Electrolux
- Televisie Philips
- Televisie Sony
- Televisie Xiaomi
- Televisie Casio
- Televisie Panasonic
- Televisie LG
- Televisie AEG
- Televisie BEKO
- Televisie Daewoo
- Televisie Grundig
- Televisie JVC
- Televisie Medion
- Televisie Nokia
- Televisie Pioneer
- Televisie Siemens
- Televisie Toshiba
- Televisie Xiron
- Televisie Yamaha
- Televisie Abus
- Televisie Acer
- Televisie Ag Neovo
- Televisie Airis
- Televisie Aiwa
- Televisie Akai
- Televisie Albrecht
- Televisie Alden
- Televisie Aldi
- Televisie Allview
- Televisie Alphatronics
- Televisie AOC
- Televisie Apex
- Televisie Arcelik
- Televisie Aristona
- Televisie Audiosonic
- Televisie Avtex
- Televisie Belson
- Televisie BenQ
- Televisie Blaupunkt
- Televisie Bluesky
- Televisie Brandt
- Televisie Daitsu
- Televisie Dell
- Televisie Denver
- Televisie Difrnce
- Televisie Digihome
- Televisie Dual
- Televisie Durabase
- Televisie Dyon
- Televisie E-motion
- Televisie Emerson
- Televisie Energy Sistem
- Televisie Engel
- Televisie Fantec
- Televisie Ferguson
- Televisie Finlux
- Televisie Fujitsu
- Televisie Funai
- Televisie GPX
- Televisie Graetz
- Televisie Haier
- Televisie Hannspree
- Televisie Hisense
- Televisie Hitachi
- Televisie HKC
- Televisie Hoher
- Televisie Horizon
- Televisie Humax
- Televisie Hyundai
- Televisie Icy Box
- Televisie Iiyama
- Televisie ILive
- Televisie Innoliving
- Televisie Insignia
- Televisie Intenso
- Televisie ITT
- Televisie Kogan
- Televisie Kuppersbusch
- Televisie Lenco
- Televisie Lenovo
- Televisie Lexibook
- Televisie Loewe
- Televisie Logik
- Televisie Luxor
- Televisie Magnum
- Televisie Manhattan
- Televisie Manta
- Televisie Marantz
- Televisie Marquant
- Televisie Megasat
- Televisie Metz
- Televisie Mitsubishi
- Televisie Mpman
- Televisie MT Logic
- Televisie Muse
- Televisie Mx Onda
- Televisie Nabo
- Televisie Nec
- Televisie Newstar
- Televisie Nextbase
- Televisie Nikkei
- Televisie Nordmende
- Televisie Packard Bell
- Televisie Philco
- Televisie Polar
- Televisie Polaroid
- Televisie Premier
- Televisie Proline
- Televisie Pyle
- Televisie RCA
- Televisie Reflex
- Televisie Reflexion
- Televisie Rm 2000
- Televisie Roadstar
- Televisie Sagem
- Televisie Salora
- Televisie Sanyo
- Televisie Sbr
- Televisie Schneider
- Televisie Seg
- Televisie Selfsat
- Televisie Sencor
- Televisie Sharp
- Televisie Silvercrest
- Televisie Sogo
- Televisie Soundmaster
- Televisie Strong
- Televisie Sunny
- Televisie Sunstech
- Televisie Superior
- Televisie Sweex
- Televisie Sylvania
- Televisie TCL
- Televisie Teac
- Televisie TechLine
- Televisie Technika
- Televisie Technisat
- Televisie Techwood
- Televisie Tele 2
- Televisie Teleco
- Televisie Telefunken
- Televisie Terris
- Televisie Tesla
- Televisie Tevion
- Televisie Thomson
- Televisie Tve
- Televisie Uniden
- Televisie United
- Televisie Vestel
- Televisie Viewpia
- Televisie Viewsonic
- Televisie Vision Plus
- Televisie Vivax
- Televisie Vivo
- Televisie Voxx
- Televisie Walker
- Televisie Westinghouse
- Televisie Wharfedale
- Televisie Woxter
- Televisie Xoro
- Televisie Yasin
- Televisie Zalman
- Televisie Ziggo
- Televisie Jay-tech
- Televisie Jensen
- Televisie JGC
- Televisie JTC
- Televisie Odys
- Televisie OK
- Televisie Oki
- Televisie Online
- Televisie Onn
- Televisie Opera
- Televisie Oppo
- Televisie Optoma
- Televisie Orion
- Televisie Changhong
- Televisie Clatronic
- Televisie Continental Edison
- Televisie ECG
- Televisie Palsonic
- Televisie Vox
- Televisie Bang And Olufsen
- Televisie GoGEN
- Televisie Krüger And Matz
- Televisie Naxa
- Televisie Proscan
- Televisie Kunft
- Televisie Aspes
- Televisie AYA
- Televisie Bush
- Televisie High One
- Televisie Infiniton
- Televisie Kernau
- Televisie Nevir
- Televisie Orima
- Televisie Svan
- Televisie Grunkel
- Televisie SereneLife
- Televisie Zenith
- Televisie Citizen
- Televisie Kubo
- Televisie Smart Brand
- Televisie Alba
- Televisie Edenwood
- Televisie Elbe
- Televisie Majestic
- Televisie Trevi
- Televisie NPG
- Televisie Orava
- Televisie Star-Light
- Televisie Videocon
- Televisie Cecotec
- Televisie Furrion
- Televisie Coby
- Televisie Doffler
- Televisie DGM
- Televisie Planar
- Televisie Chiq
- Televisie Monster
- Televisie Antarion
- Televisie Felson
- Televisie SEIKI
- Televisie SunBriteTV
- Televisie Tucson
- Televisie LTC
- Televisie Caratec
- Televisie Séura
- Televisie AudioAffairs
- Televisie Element
- Televisie Peerless-AV
- Televisie XD Enjoy
- Televisie Inovia
- Televisie Telesystem
- Televisie Kemo
- Televisie EKO
- Televisie V7
- Televisie ISymphony
- Televisie Pantel
- Televisie ATYME
- Televisie HCI
- Televisie Inno-Hit
- Televisie Lin
- Televisie Englaon
- Televisie Astar
- Televisie Visco
- Televisie Tivax
- Televisie H&B
- Televisie Norcent
- Televisie TELE System
- Televisie TIM
- Televisie Kivi
- Televisie Mach Power
- Televisie Axing
- Televisie FFalcon
- Televisie Smart Tech
- Televisie Mitzu
- Televisie JTC24
- Televisie Coocaa
- Televisie SYLVOX
- Televisie RevolutionHD
Nieuwste handleidingen voor Televisie
2 Mei 2024
30 April 2024
26 April 2024
25 April 2024
25 April 2024
25 April 2024
25 April 2024
25 April 2024
25 April 2024
18 April 2024