Samsung CS-29M17MH Handleiding
Samsung
Televisies
CS-29M17MH
Lees hieronder de π handleiding in het Nederlandse voor Samsung CS-29M17MH (8 pagina's) in de categorie Televisies. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
English - 1
β’The actual configuration of your TV may be different,
depending on your model.
Connection Panel (depending on the model)
βPlease be sure to match the colour coded input
terminals and cable jacks.
Connecting to the RCA Input
The 1( - /AUDIO L R) and 2(VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
COLOUR TELEVISION
CS- 29140MH/29240PQ/29150/29K40MH/
29M17MH/29M40MH
Ownerβs Instructions
Before operating, please read this manual thoroughly,
and retain it for future reference.
Register your product at
www.samsung.com/global/register
β’The product color and shape may very depending on
the model.
Control Panel(depending on the model)
βYou can use the buttons to switch the TV on when it is3
in standby mode depending on the model.
βThe 2 3and buttons also have the same function as the
Ε β β β¦/ / / buttons on the remote control.
βIf the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Front (or Side) Panel
1On-screen menu display
2Volume adjustment
3Channel selection
4Remote control sensor
5Standby indicator
6Power on/off
AA68-03807A-03
1Audio input
1Audio input
2Video input
2Video input
Front (or Side) Panel
cable television network
Rear Panel
or
βWhenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 1(75 β¦
coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the SCART Input/Output
The SCART and SCART connectors are used for2 3
equipment, such as a VCR, DVD, decoder, satellite receiver,
video game device, or video disc player.
The SCART is also used for equipment with an RGB2
output, such as a video game device or video disc player.
continued...
Connecting to the RCA Output
The RCA6
6
6
6
6connectors are used for equipment, such as a
recording VCR or audio system.
Connecting to the RCA Input
The RCA and RCA connectors are used for equipment,4 5
such as a VCR, DVD, decoder, satellite receiver, video game
device, or video disc player. (When using the mono
equipment, connect to the input connector.)AUDIO-L
The RCA7
7
7
7
7connectors are used for equipment such as a
DVD with component output (480i only).
English - 2
β’Operation of remote control may be affected by bright
artificial light near to the TV.
Remote Control
(depending on the model)
Installing Batteries
Remove the cover. Install two AAA
size batteries, then replace the cover.
When the remote control does not
operate normally, check that the β+β
and β
-
β ends of the batteries are inserted correctly or the
batteries are drained.
β’Do not mix battery types, i.e. alkaline and manganese.
The mains lead is attached to the rear of the television.
1Plug the mains lead into an appropriate socket.
β’The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2Press the β
I
β button (On/Off) on the front (or side) of the
television.
3Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to βChannel - Auto Storeβ or βChannel - Manual
Storeβ on page 4.
β’If the television is initially powered on, several basic
customer settings proceed automatically. Refer to
βSetup - Plug & Playβ on page 3.
4To switch the television off, press the β
I
β button (On/Off)
on the front (or side) of the television.
Switching the Television On and Off
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1Press the POWER button on the remote control while
viewing.
The television is in standby mode.
2To switch the television back on, simply press it again.
βDo not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example). Turn the television off by pressing the β
I
β
button (On/Off) on the front (or side) of the television. It
is best to unplug the set from the mains and aerial.
Placing the Television in Standby Mode
4
4
4
4
4/
Used to increase or
decrease the volume.
5
5
5
5
5
MENU
Used to display the on-
screen menu or return to
the previous menu.
6
6
6
6
6
β¦
β¦
β¦
β¦
β¦
/ β
β
β
β
β
/ Ε
Ε
Ε
Ε
Ε
/ β
β
β
β
β
Used to control the
cursor in the menu.
7
7
7
7
7
S.MENU
Used to display the
sound menu.
8
8
8
8
8
TURBO
Used to select the turbo
sound option.
9
9
9
9
9
P.SIZE
Used to change the
screen size.
0
0
0
0
0
DUAL I-II
Used to select the
sound mode.
!
!
!
!
!
SOURCE
Used to display all of the
available video sources.
@
@
@
@
@
INFO
Used to view the
channel information and
setting status you
selected.
#
#
#
#
#
PRE-CH
Used to switch
repeatedly between the
last two channels
displayed.
$
$
$
$
$P /
Used to display the next
or previous stored
channel.
%
%
%
%
%
EXIT
Used to exit from any
display or return to
normal viewing.
^
^
^
^
^MUTE
Used to switch the
sound off temporarily. To
turn the sound back on,
press the MUTE, , or
button.
&
&
&
&
&
ENTER
While using the on-
screen menus, press the
ENTER button to
activate (or change) a
particular item.
*
*
*
*
*
S.MODE
Used to select the
sound effect.
(
(
(
(
(
P.MODE
Used to select the
picture effect.
)
)
)
)
)
TV
Used to return to the TV
mode when it is in
external input mode.
a
a
a
a
a
SLEEP
Used to select a preset
time interval for
automatic turn off.
1
1
1
1
1POWER
Used to switch the TV
on and off.
2
2
2
2
2Numeric buttons
Used to select channels
directly.
3
3
3
3
3
-/--
Used to select a channel
numbered ten or over.
Press this button, then
β
--
β symbol is
displayed. Enter the
two-digit channel
number.
English - 3
βSource List
You can switch between
viewing signal from
connected equipment, such
as a VCR, DVD, set-top box,
and the TV source
(broadcast or cable).
β’You can change the required external source simply
by pressing the SOURCE button on the remote
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
βEdit Name
You can give a name to the
external source.
Input
(depending on the model)
-
Source List / Edit Name
Move Enter Return
TV
AV1 --- -
AV2 --- -
Componet --- -
Source List
TV
Move Enter Return
AV1 :
AV2 :
Component :
Edit Name
TV
----
VCR
DVD
Cable STB
Satellite STB
AV Receiver
DVD Receiver
β
β
β
β
β
2Select the appropriated language by pressing the β¦or
β button. Press the ENTER button.
The Check antenna
input. is displayed.
β’If any language is not
selected, the language
menu will disappear
about 30 seconds later.
3Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Area menu is
displayed.
4Press the β¦ β or button to
select your area. Press the
ENTER button.
5To search the channels,
press the ENTER button. To
stop the search, press the
ENTER button.
When the channel
searching has finished, the
Clock Set menu is
displayed.
6Press the Ε βor button to
move to the hour or minute.
Set the hour or minute by
pressing the β¦ β or button.
7When you have finished,
press the MENU button.
The Enjoy your
watching. is displayed, and then the channel which
has been stored will be activated.
Re-setting the Plug & Play
Method: MENU ββ¦
β¦
β¦
β¦
β¦/β
β
β
β
β ( )Setup
β βENTER β¦
β¦
β¦
β¦
β¦/β
β
β
β
β (Plug &
Play) βENTER
Viewing the Menus
1Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input Picture Sound Channel, , , , and
Setup.
2Press the β¦ β or button to select one of the icons.
Press the button to access the iconβs sub-menu.ENTER
3Press the β¦ β or button to move to items in the menu.
Press the button to enter items in the menu.ENTER
4Press the β¦ β Ε β/ / / button to change the selected
items. Press the button to return to the previousMENU
menu.
5Press the EXIT button to exit from the menu.
Setup - Plug & Play (depending on the model)
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
1If the television is in standby
mode, press the POWER
button on the remote
control.
The
Start Plug & Play.
is displayed. To start Plug &
Play, press the ENTER
button. The Language
menu is displayed.
β’The menuLanguage
will automatically
appear after several
seconds, even if the button is not pressed.ENTER
continued...
Move Enter Return
Plug & Play β
β
β
β
β
Language : English β
β
β
β
β
Time β
β
β
β
β
Child Lock β
β
β
β
β
Blue Screen : Off β
β
β
β
β
Melody : On β
β
β
β
β
Demonstration β
β
β
β
β
Setup
TV
Plug & Play
Enter Return
OK
Start Plug & Play.
Plug & Play
Move Enter Skip
Language
Eng
lish
Indonesia
Melayu
Français
Plug & Play
Enter Skip
OK
Check antenna input.
Plug & Play
Move Enter Skip
Area
Asia/W.Europe
CIS/E.Europe
China
Hong Kong/UK
Australia
NZL/Indonesia
South Africa
America
Plug & Play
Enter Skip
Stop
Auto Store
P 1 C-- 102MHz
7 %
Plug & Play
Enter Skip
Start
Auto Store
Plug & Play
Move Enter
Skip
Clock Set - - : - - a m
OK
Enjoy your watching.
Standard screen format televisions (4:3, the aspect ratio of the
screen width to height) are primarily designed to view standard
format full-motion video.
The images displayed on them should primarily be in the standard
4:3 ratio format and constantly moving. Displaying stationary
graphics and images on screen, such as the dark top and bottom
letterbox bars (wide screen pictures), should be limited to no more
than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen
width to height) are primarily designed to view wide screen format
full-motion video. The images displayed on them should primarily be
in the wide screen 16:9 ratio format, or expanded to fill the screen if
your model offers this feature, and constantly moving. Displaying
stationary graphics and images on screen, such as the dark side-
bars on non-expanded standard format television video and
programming, should be limited to no more than 15% of the total
television viewing per week.
Additionally, viewing other stationary images and text such as stock
market reports, video game displays, station logos, web sites or
computer graphics and patterns, should be limited as described
above for all televisions. Displaying any stationary images that
exceed the above guidelines can cause uneven aging of picture
tubes (CRTs) that leave subtle, but permanent burned-in ghost
images in the television picture. To avoid this, vary the programming
and images, and primarily display full screen moving images, not
stationary patterns or dark bars.
On television models that offer picture sizing features, use these
controls to view the different formats as a full screen picture.
Be careful in the selection and duration of television formats used for
viewing. Uneven CRT aging as a result of format selection and use,
as well as other burned-in images, is not covered by your Samsung
limited warranty.
Important Warranty Information
Regarding Television Format Viewing
Product specificaties
| Merk: | Samsung |
| Categorie: | Televisies |
| Model: | CS-29M17MH |
Heb je hulp nodig?
Als je hulp nodig hebt met Samsung CS-29M17MH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Televisies Samsung
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
Handleiding Televisies
- Televisies Philips
- Televisies Sony
- Televisies Panasonic
- Televisies LG
- Televisies Daewoo
- Televisies JVC
- Televisies Aiwa
- Televisies Akai
- Televisies Funai
- Televisies Hitachi
- Televisies Marquant
- Televisies Mitsubishi
- Televisies Sanyo
- Televisies Sharp
- Televisies Superior
- Televisies Sylvania
- Televisies Clatronic
Nieuwste handleidingen voor Televisies
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022
4 Oktober 2022