Salicru 698BT000004 Handleiding

Salicru Niet gecategoriseerd 698BT000004

Lees hieronder de 📖 handleiding in het Nederlandse voor Salicru 698BT000004 (48 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48

2.1.1. Conventions and used symbols.

3.2.1. First and second environment.

3.2.1.1. First environment.

3.2.1.2. Second environment.

4.1.1. Views of the equipment.

4.1.2. Legends corresponding to the equipments views.

4.2.1. Nomenclature.

4.3.1. Main features.

4.4.1. Isolation transformer.

4.4.2. External maintenance manual bypass.

4.4.3. Integration in IT networks by means of the SNMP adaptor.

4.4.4. Relays interface card.

4.4.5. Parallel cable kit.

4.4.6. MODBUS protocol.

4.4.7. Telescopic guide kit for rack cabinet assembling in.

5.2.1. Unpacking, content checking and inspection.

5.2.2. Storage.

5.2.3. Unpacking.

5.2.4. Procedure to take out and install the batteries in equipments of 4 to

10 kVA.

5.2.5. Vertical -tower type- or rack models.

5.2.5.1. Rotation of control panel with LCD.

5.2.5.2. Taking out or putting the beautiful front cover.

5.2.5.3. Vertical -tower type-assembling.

5.2.5.4. Vertical -tower type- assembling, with extended back up time

(battery module).

5.2.5.5. 19" rack cabinet mounting.

5.2.5.6. 19" rack cabinet assembling, with extended back up time (battery

module).

5.3.1. Connection of input.

5.3.2. Connection of the static bypass power blocks (> 3 kVA models

power rate only).

5.3.3. Connection of the IEC outlets and output power blocks.

5.3.4. Connection of the external batteries (extended back up time).

5.3.5. Connection of main input earth terminal and the earth bonding

terminal .

5.3.6. Terminals for EPO (Emergency Power Off).

5.3.7. "Dry_in" terminals, remote ON-OFF (0,7 to 3 kVA equipments only).

5.3.8. "Dry_out" terminals, dry contact for alarm (0,7 to 3 kVA equipments

only).

5.3.9. Connection in parallel.

5.3.9.1. Introduction to the redundancy.

5.3.9.2. Installation and parallel operating (4 to 10 kVA equipments only).

5.3.10. Communication ports.

5.3.10.1. RS232 and USB interfaces.

5.3.10.2. Smart slot.

5.3.10.3. Relays interface (option).

5.3.11. Software.

5.3.12. Considerations before starting up the connected loads.

6.1.1. Controls before commissioning.

6.2.1. Start up and shutdown of the UPS.

6.2.2. Start up of the UPS, without mains.

6.2.3. UPS shutdown, with mains present.

6.2.4. UPS shutdown, without mains.

6.5.1. Operating principle.

6.5.2. Transference to maintenance bypass.

6.5.3. Transference to normal mode.

7.1.1. Acoustic alarms.

7.1.2. UPS status and color LCD display, as condition.

7.1.3. Main screen.

7.3.1. Main screen.

7.3.2. UPS status submenu.

7.3.3. Data logger submenu.

7.3.4. Measurement submenu.

7.3.5. Control submenu.

7.3.6. Identification submenu.

7.3.7. Setting submenu.

7.4.1. Operating on ECO mode.

7.4.1.1. Short description of the ECO mode.

7.4.1.2. To establish the ECO mode function.

7.5.1.1. Short description of the frequency converter function.

7.5.1.2. To establish the Converter mode function.

8.1.1. Notes for installing and replacing the batteries.

8.2.1. Troubleshooting guide. Alarm or fault indications.

8.2.2. Troubleshooting guide. Warning indications.

8.2.3. Troubleshooting guide. Other circumstances.

8.3.1. Warranty terms.

8.3.2. Out of scope of supply.

Product specificaties

Merk:	Salicru
Categorie:	Niet gecategoriseerd
Model:	698BT000004
Kleur van het product:	Zwart
Vormfactor:	Rackmontage/toren
Accu/Batterij voltage:	12 V
Aantal:	1
Compatibele producten:	Salicru SLC-3000-TWIN RT
Batterijtechnologie:	Sealed Lead Acid (VRLA)