Sagemcom F@st 3896 SUM Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sagemcom F@st 3896 SUM (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Sagemcom F@ST 3896 SUM
Quick Setup Guide
Next Generation High Speed DOCSIS3.1 residential gateway
PACKAGE CONTENTS
The package contains the following items:
F@ST 3896 SUM residential gateway
Power adapter
Safety and regulatory information sheet
This guide
INSTALLING THE PRODUCT
Connecting your F@ST 3896 SUM to your
service provider’s network
1. Connect one end of the coaxial cable
(not included) to a cable outlet
2. Connect the other end of the coaxial cable
to the cable port of the F@ST 3896 SUM
Powering on the F@ST 3896 SUM
1. After connecting the coaxial cable, plug
the DC connector of the provided power supply
adapter into the F@ST 3896 SUM DC input port
2. Plug the power supply adapter into a nearby available AC power outlet
3. Check that the power LED is ON
4. After a few minutes, the DS, US and Online LED will turn on sequentially
5. Once the Online LED is solid green, your F@ST 3896 SUM residential gateway is connected
to the service provider’s network
Note: depending on network conditions, it may take several minutes for the home gateway
to come online. If the DS and US LEDs start blinking simultaneously, your F@ST 3896 SUM is
undergoing firmware upgrade. Do not power off the unit or unplug any cable until the
upgrade is complete.
Connecting the F@ST 3896 SUM to your local area network (LAN)
1.
Using an Ethernet cable (not included), connect one end to the LAN port of the F@ST 3896 SUM.
2.
Connect the other end of the cable to an available RJ45 connector on your computer.
3.
Check that the LAN LED of the F@ST 3896 SUM turns on. It may blink; this is normal and indicates
network activity.
4. Check that the computer connected to the LAN port is assigned an IP address by the
gateway and can reach the internet. You may have to check the device configuration to ensure
that DHCP is enabled.
Coaxial cable connection
Power connection
LED State Description
Power
On DC power present
Off No DC power
Downstream
Off No DOCSIS connection
Amber
DOCSIS 3.0 up
Green
DOCSIS 3.1 up
Upstream
On No DOCSIS connection
Amber
DOCSIS 3.0 up
Green
DOCSIS 3.1 up
Online
On Internet connection available
Off Internet connection unavailable
WLAN 2.4 GHz
On 2.4 GHz radio active
Off 2.4 GHz radio disabled
WLAN 5 GHz
On 5 GHz radio active
Off 5 GHz radio disabled
WPS
On WPS active
Off WPS not active
TEL 1
On Enabled and phone connected
Off Line disabled or no phone connected
TEL 2
On Enabled and phone connected
Off Line disabled or no phone connected
LAN
On Link up on LAN interface
Off Link down on LAN interface
MOCA
On MoCA interface is active
Off MoCA interface is disabled
Resetting the F@ST 3896 SUM
Your residential gateway is equipped with a reset
button reachable with a paper clip or the tip of a pen.
To restart the device, press the reset button for less
than 2 seconds.
To restore the device to factory configuration, press the
reset button for 5 seconds or longer before releasing.
The residential gateway will then restart and perform
the initialization sequence. Note that the unit may
take several minutes to become online after a factory
reset is performed.
FRONT PANEL LED DESCRIPTION
Reset
button
Ethernet cable
Cat-5e or better


Product specificaties

Merk: Sagemcom
Categorie: Niet gecategoriseerd
Model: F@st 3896 SUM

Heb je hulp nodig?

Als je hulp nodig hebt met Sagemcom F@st 3896 SUM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Sagemcom

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd