Russell Hobbs 18276-56 Allure Handleiding

Russell Hobbs Blender 18276-56 Allure

Lees hieronder de 📖 handleiding in het Nederlandse voor Russell Hobbs 18276-56 Allure (90 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/90
instructions 2
Bedienungsanleitung 6
mode d’emploi 10
instructies 14
istruzioni per l’uso 18
instrucciones 22
instruções 26
brugsanvisning 30
bruksanvisning 34
instruksjoner 38
ohjeet 42
инструкции (Русский) 46
pokyny 50
inštrukcie 54
instrukcja 58
uputstva 62
navodila 66
οδηγίες 70
utasítások 74
talimatlar 78
instrucţiuni 82
инструкции ългарски) 86
2
Read the instructions and keep them safe. If you pass the appliance on, pass on the instructions
too. Remove all packaging, but keep it till you know the appliance works.
important safeguards
Follow basic safety precautions, including:
1 This appliance must only be used by a responsible adult. Use and store the appliance out of
reach of children.
2 Don’t put the appliance in liquid, don’t use it in a bathroom, near water, or outdoors.
3 Unplug before dismantling or cleaning.
4 The appliance is fitted with a safety switch to prevent the motor operating unless the jug is in
place and the lid correctly fitted. Don’t use this to switch the appliance on and off.
5 Switch off ( ) before fitting the jug to the motor unit.3
6 Switch off (3), and wait till the blades come to a stop before removing the lid from the jug, or
removing the jug from the motor unit.
7 Don’t fill with anything hotter than you can comfortably handle (i.e. liquid temperature
below 40°C).
8 Don’t put your hand into the jug, even after you’ve removed it from the motor unit
– the blades are sharp.
9 Take great care when handling the blade unit.
10 Don’t put any other object (spoon, spatula, etc.) into the jug while the blender is plugged in.
11 Don’t leave the appliance unattended while plugged in.
12 Route the cable so it doesn’t overhang, and can’t be tripped over or caught.
13 Don’t let the jug overflow. If liquid gets under the motor unit, it may be sucked into the motor,
damaging it.
14 Don’t run the appliance empty, it may overheat.
15 Keep the appliance and the cable away from hotplates, hobs or burners.
16 Don’t fit any attachment or accessory other than those we supply.
17 Don’t use the appliance for any purpose other than those described in these instructions.
3
18 Don’t operate the appliance if it’s damaged or malfunctions.
19 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
household use only
preparation
1 Sit the motor unit on a dry, firm, level surface, near a power socket.
3 Hold the jug above the motor unit, with the handle about of a turn anti-clockwise of the µ
light.
4 Lower the jug on to the motor unit, then turn the jug clockwise, to align the handle with the
light.
5 Turn the lid about of a turn anti-clockwise to unlock it, and lift it off the jug.µ
6 Put the ingredients into the jug.
7 Don’t fill past the 1500ml mark. If you do, the contents may force the lid off when you start
the motor.
fit the lid
8 Put the lid on the jug, and turn it clockwise to close it and operate the safety switch.
9 Align the pips on the sides of the cap with the slots in the hole in the lid, put the cap into the
hole, and turn it about of a turn clockwise to lock it.µ
10 Don’t run the appliance without fitting the cap.
switch on
11 Put the plug into the power socket.
12 Press and release the button.3
a) the light will come on
b) the display will show 0
the speed controls
13 Press to increase, to decrease the speed.u d
14 The range is from 1 (low) to 12 (high).
15 The motor turns off when the display shows 0.
16 To stop quickly, press .3
17 Generally, large quantities, thick mixes, and a high ratio of solids to liquids suggest longer
timings and slower speeds.
18 Smaller quantities, thinner mixes, and more liquids than solids suggest shorter timings and
higher speeds.
19 Don’t run the motor continuously for more than 2 minutes, it may overheat. After 2 minutes
switch ofor at least 2 minutes, to recover.
20 The most efficient way is to blend for a short time, stop and examine the results, then blend
again: blend – look – blend, till you achieve the result you want.
the pulse button Y
21 Pressing the pulse button ( ) will over-ride the speed set by the speed buttons, and give you Y
a burst of high speed.
22 When you release the button, the motor returns to the set speed.Y
23 You can also use it independently of the speed buttons.
instructions
drawings
1 pips
2 cap
3 slots
4 hole
5 lid
6 bayonet fitting
7 safety switch
8 jug
9 handle
10 jug base
11 seal
12 blades
13 blade unit
14 display
15 light
16 switch
17 motor unit
18 unlock
19 lock
20 blade unit (upside down)
21 jug base (underneath)


Product specificaties

Merk: Russell Hobbs
Categorie: Blender
Model: 18276-56 Allure
Kleur van het product: Black, Stainless steel
Soort: Blender voor op aanrecht
Aantal snelheden: 12
Uitneembare bak: Ja
Vermogen: 800 W
Inhoud bak/kan: 1.5 l
Snoeropslag: Ja
IJs-crusher: Ja
Anti-slip voetjes: Ja
Materiaal: Plastic, Stainless steel
Pulse function: Ja
Verwijderbaar mes: Ja
Stroomverbruik (typisch): 800 W

Heb je hulp nodig?

Als je hulp nodig hebt met Russell Hobbs 18276-56 Allure stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Blender Russell Hobbs

Handleiding Blender

Nieuwste handleidingen voor Blender