Royal Sovereign RS-SAFE120L Handleiding

Royal Sovereign Kluis RS-SAFE120L

Lees hieronder de 📖 handleiding in het Nederlandse voor Royal Sovereign RS-SAFE120L (2 pagina's) in de categorie Kluis. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
1. Remove plastic emergency override key cover from front of safe
2. Insert override key into lock and turn key clockwise
3. Pull door open
1. Open safe with emergency override key
2. Open the battery compartment and add the 4 AA batteries
3. You will hear a beep, this means the safe is ready to be programed
1. Press the “ ” button twice, the screen will display “ CLEAR PROG
2. Once “ disappears input the default master code “ ”, the screen will display PROG 888888
“ ”NEW
3. When “ ” disappears, key in any 6 digit combination within 15NEW seconds, the screen will
display “ AGAIN
4. Enter the same 6 digit combination within 15 seconds. The screen will display “ ” once DONE
the master code is accepted
Box Contents
1. Safe
2. 2 Emergency override keys
3. 2 Mounting bolts
4. Scratch resistant carpet
5. 4 AA batteries
6. Allen wrench
Parts
2. Battery compartment
4. Control panel
OPEN THE SAFE – USING EMERGENCY OVERRIDE KEY
5
1
2
3
Owner’s Manual
RS-SAFE120L
4
2
3
GETTING STARTED
SET A MASTER CODE
1
*Always remember this master code as you will not be able to rest it once it’s programed.
4
5
6
Door should always be left open and unlocked for the next guest.
1. Hold safe door closed. Enter a 3-6 digit code onto the keypad.
2. Press “ buttonLOCK
3. The locking bolts will begin to close, once the safe is fully closed the display will read
“ ”CLOSED
*Be sure to hold the safe door closed until display reads “CLOSED” otherwise safe will beep and display
“ ”ERROR .
1. Enter the 4-6 digit code onto the keypad that was previously set
2. Locks will begin to open
3. Once the safe is fully opened the display will read “ ”OPENED
*3 continuous wrong entries will lock the guest out of the safe for 15 minutes.
**If guest forgets their code use emergency override keys or
master code to unlock the safe. Then follow the steps to lock the safe to program a new guest code.
For more information go to www.royalsovereign.com
1. NEVER keep your emergency override keys inside your safe
2. Safe is only considered secure when fixed to a load bearing wall or join
3. Safe has limited 1 year warranty
Mount safe to an area that is not easy to move
1. Open safe and locate the predrilled holes on the back or bottom of the safe
2. Drill holes for expansion bolts
3. Turn the expansion bolts counter clockwise to separate
4. Use the expansion bolts to secure the safe to the wall
5. Make sure the safe is mounted in place as required and then tighten all screws
MOUNTING
IMPORTANT INFORMATION
1
2
3
SET A GUEST CODE
To Lock the Safe
To Open the Safe


Product specificaties

Merk: Royal Sovereign
Categorie: Kluis
Model: RS-SAFE120L

Heb je hulp nodig?

Als je hulp nodig hebt met Royal Sovereign RS-SAFE120L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Kluis Royal Sovereign

Handleiding Kluis

Nieuwste handleidingen voor Kluis