Rolls MiniMix Pro MX122 Handleiding

Rolls Mengpaneel MiniMix Pro MX122

Lees hieronder de 📖 handleiding in het Nederlandse voor Rolls MiniMix Pro MX122 (2 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
MX122
MiniMix Pro Mixer
Quick Start Guide
ROLLS CORPORATION
SALT LAKE CITY, UTAH
8/19
SPECIFICATIONS
Input Impedance: Line: 10 K Ohms unbal.
Mic: 10 K Ohms bal.
Phantom Power Voltage: +15 VDC
Output Impedance: 50 Ohms bal
Max Input Level: +24 dBV line, -8 dBV microphone
Phase Shift: < 10 deg. 20 Hz - 20 kHz
Connectors: 8: 1/4” TS Inputs, 1: XLR Mic Input
3: 1/4” TRS, 1: 1/8” (3.5mm) Outputs
Max Gain: 26 dB Line
26 dB Aux
80 dB Mic
Mic CMRR: 95 dB
S/N Ratio: >90 dB
THD: < .004%
IMD (SMPTE): < .004%
Self Noise: < - 82 dB
Power: 9-15 VDC
Size: 8.4 x 1.7” x 5”
(21.3 x 4.3 x 13 cm)
Weight: 2.5 lbs (1.14 kg)
R L
PAN
R L
BAL
R L
BAL
R L
BAL
R L
BAL
MASTER
LEVEL
PHONE/AUX
LEVEL
PHONE/AUX
OUTPUTS
pwr
LEVEL LEVEL LEVEL LEVELMIC LEVEL
FEATURES
• 1 XLR balanced Mic Input with rear panel Trim control
• +15VDC Phantom Power
• 4 individual 1/4” Stereo Inputs
• Balanced 1/4” TRS Outputs
• Balance control on each channel (Pan on the Mic channel)
• Headphone / Auxiliary Outputs
• External Power Supply included for low noise operation
Thank your for your purchase of the Rolls MX122 MiniMix Pro
Mixer. The MX122 is a line-level mixer featuring a single mic input
and four channels of stereo inputs.
Channel One
Mic Level: Adjusts the signal level of CH 1 XLR mic input.
Pan: Adjusts the relative level of the microphone signal to the Right
and Left Outputs.
Note: Channels Two through Five are identical.
Channel Two - Five Section
Level: Adjusts the overall signal level of the channel.
Bal: Adjusts the relative level of the channel signal to the Right and
Left outputs.
Master Level: Controls the overall output level of the MX122.
Phone/Aux Level: Adjusts the output level of the Phone/Aux Outputs.
Phone/Aux Outputs: 1/4” and 1/8” (3.5mm) TRS stereo jacks for moni-
toring the master right and left signals, also may be used as an alter-
native stereo output for connecting to another stereo amplier.
PWR: Indicates that the MX122 is connected to an AC outlet and is on.
15 VDC: Connects to the included Rolls PS27s 15 VDC power supply.
Master Outputs Right and Left: 1/4” TRS balanced main output jacks.
For connection to an amplier, recording device or signal processor.
Mic Input Channel 1: Balanced XLR jack for connection to a condenser
or dynamic microphone.
Phantom Power: Switch for applying +15V phantom power to the Mic
XLR Input jack.
Channel Inputs
Note: Channels Two through Five are identical.
Right / Left: 1/4” TS unbalanced jacks for connection to the right and
left outputs of a stereo instrument. If a mono signal is being sent, use
the Right input, for a Tip-Ring-Sleeve stereo signal, use the Left input.
Mic Trim: Adjusts the initial gain of the Mic preamp circuitry.
R L
PAN
R L
BAL
R L
BAL
R L
BAL
R L
BAL
MASTER
LEVEL
PHONE/AUX
LEVEL
PHONE/AUX
OUTPUTS
pwr
LEVEL LEVEL LEVEL LEVEL
MIC LEVEL
MODEL MX122
MADE IN
USA
15 VDC
OUTPUT phantom power
MONOSTER
RIGHTLEFT
MONOSTER
RIGHTLEFT
MONOSTER
RIGHTLEFT
MONOSTER
RIGHTLEFT
MIC
TRIM
MIC
RIGHTLEFT
on


Product specificaties

Merk: Rolls
Categorie: Mengpaneel
Model: MiniMix Pro MX122

Heb je hulp nodig?

Als je hulp nodig hebt met Rolls MiniMix Pro MX122 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Mengpaneel Rolls

Rolls

Rolls DA134 Handleiding

16 November 2023
Rolls

Rolls PM59 Handleiding

16 November 2023
Rolls

Rolls MX44 Pro Handleiding

16 November 2023
Rolls

Rolls MX401 Handleiding

16 November 2023
Rolls

Rolls RM169 Handleiding

16 November 2023
Rolls

Rolls MX422 Handleiding

16 November 2023
Rolls

Rolls MA1705 Handleiding

16 November 2023

Handleiding Mengpaneel

Nieuwste handleidingen voor Mengpaneel