Rolls LiveMix MX34c Handleiding

Bekijk gratis de handleiding van Rolls LiveMix MX34c (2 pagina’s), behorend tot de categorie Mengpaneel. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 4.1 sterren uit 8 reviews. Heb je een vraag over Rolls LiveMix MX34c of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick Start Guide

ROLLS CORPORATION

SALT LAKE CITY, UTAH

8/19

Thank you for purchasing the new MX34c LiveMix - two channel microphone mixer.

Although having many uses, this little mixer was originally designed with the video

camera operator in mind. Easy-access microphone Level and Pan controls, and smart

Input/Output jack placement make the MX34c ideal for the live recording enthusiast.

Two 9 volt alkaline batteries ensure adequate signal strength as well as phantom

power for your favorite condenser microphone.

What's in the box?

1 - Made in USA MX34c

1 - 15V power supply PN PS27s

1 - This owners manual

MX34cLiveMix

POWER

15 VDC

STEREO

OUT

AUX

IN

+

-

BATTERIES

9V x 2

LiveMix

Two Channel Stereo

Microphone Mixer/

Headset MixerMX34c

CHANNEL 1CHANNEL 2

INPUTS

www.rolls.com

OUTPUT LEVEL

MIC

LINE

OFF=UP

ON=DOWN

PHANTOM POWER

Input Impedance: mic - 600 Ohms or greater XLR

aux - 47K stereo 3.5mm

Output Impedance: 50 Ohms

THD + Noise: .02%

S/N Ratio: 110 dB

Frequency Response: 20 Hz - 30 kHz (+0 / -1 dB)

Max Output Level: + 14 dB

Max Input Level: +20 dB

Max Gain: +70 dB

Batteries: 2 X 9V Alkaline (not included)

Current Draw: 30 mA

Phantom Power: +18 VDC

Input Connectors: 2 Female XLR, 1/8” (3.5mm)

DC Power Jack: (5.5 X 2.1 mm tip negative)

Output connectors: 3.5mm stereo main out

3.5mm Headphone

Size: 6.3”w x 3.7”d x 1.4” h

Weight: 1 lbs.

NOTE: ON CONNECTING A WIRELESS MIC TO THE AUX INPUT

DO NOT CONNECT A MONO PLUG TO THE AUX

IN OR STEREO OUTPUT. DOING SO WILL

RESULT IN SIGNAL LOSS OR DAMAGE TO THE

MX34c.

If you need to connect a MONO signal (like the

output of a wireless microphone) to the AUX IN

of the MX34c, you will need to make or purchase a

MONO TO STEREO cable.Shown here is a diagram

of this cable’s wiring.

MONO PLUGTIP RING SLEEVE

STEREO PLUG

Tip and Ring are wired together,

then connected to the Tip of the

Mono Plug.

Product specificaties