Roland SR-G01 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Roland SR-G01 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 141 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
1
Thank you, and congratulations on your choice of the SR-G01 “G-70 Upgrade Kit” Expansion Board, specially designed
for Roland arranger instruments that have an expansion slot for SRX-series boards.
This expansion board contains a selection of totally new sounds as well as sounds taken from Roland’s acclaimed SRX
library (SRX-03, SRX-05, SRX-07, SRX-08, etc.) and other Roland instruments. There are 76 Tones (available to all sections)
and 6 Drum Sets.
Along with piano, electric piano, organ, and electric guitar sounds, this board also features numerous vintage synth and
bass sounds available to all Keyboard parts (Upper 1/2/3, Lower 1/2, Manual Bass) as well as the Style and Song parts.
What’s more, it also includes rhythm loops that are automatically synchronized to the Arranger or Song tempo and thus
usable with a broad range of BPM values. (Please note that their pitch changes according to the tempo you select.)
The Tones on this board can be edited using the parameters available for the Keyboard parts as well as the “Makeup
Tools” environment. (The Drum Sets on this board are derived from the Fantom/XV series and do not support the Drum
Instrument edit functions of the Makeup Tools environment. Therefore, you cannot edit Volume, Pan Pot, Reverb,
Chorus, and Pitch on the “Drum Instrument Edit” page.)
* The parameter settings for the Tones and Drum Sets are optimized for Roland arrangers released in or after 2005. In the case of
the G-70 Music Workstation (released in late 2004), be sure to first install system version 2 if your instrument still uses an older
version.
* Roland does not recommend using this board with other instruments fitted with SRX slots (Fantom, XV, RD series, etc.). The
SR-G01 is intended for arranger instruments and will not yield the expected results when used with a synthesizer or module that
does not contain an arranger function.
202
Copyright © 2005 Roland Corporation.
All rights reserved. No part of this publication may be reproduced in any form without the written permission of
ROLAND CORPORATION.
Important note for G-70 users
Before installing this expansion board, be sure to check whether your G-70 already
contains version (or later) of the operating system. Proceed as follows:2.00
1. Switch on your G-70.
2. Press the [MENU] button.
3. Press the [Utility] field in the display, followed by the [Info] field.
The version number must be “2.00” or higher. If the number displayed on your G-70 is “1.1” or lower,
please install the new operating system as explained in the document called “G-70 Software Version 2
Updating.pdf.”
201a
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT
NOTES” (p. 2; p. 3). These sections provide important information concerning the proper operation of the unit.
Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new
unit, Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a
convenient reference.
04016312 ’05-10-1N
2
USING THE UNIT SAFELY
001
• Before using this unit, make sure to read the
instructions below, and the Owner’s Manual.
..........................................................................................................
002a
• Do not open or perform any internal modifica-
tions on the unit.
..........................................................................................................
003
• Do not attempt to repair the unit, or replace parts
within it (except when this manual provides
specific instructions directing you to do so). Refer
all servicing to your retailer, the nearest Roland
Service Center, or an authorized Roland
distributor, as listed on the “Information” page.
..........................................................................................................
004
• Never use or store the unit in places that are:
• Subject to temperature extremes (e.g., direct
sunlight in an enclosed vehicle, near a heating
duct, on top of heat-generating equipment); or
are
• Damp (e.g., baths, washrooms, on wet floors);
or are
• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.
..........................................................................................................
011
• Do not allow any objects (e.g., flammable material,
coins, pins); or liquids of any kind (water, soft
drinks, etc.) to penetrate the unit.
..........................................................................................................
013
• In households with small children, an adult
should provide supervision until the child is
capable of following all the rules essential for the
safe operation of the unit.
..........................................................................................................
014
• Protect the unit from strong impact.
(Do not drop it!)
..........................................................................................................
022c
• Before installing the SR-G01, you must first
always turn off the Roland arranger and unplug
its power cord.
..........................................................................................................
023
• DO NOT play a CD-ROM disc on a conventional
audio CD player. The resulting sound may be of a
level that could cause permanent hearing loss.
Damage to speakers or other system components
may result.
..........................................................................................................
106
• Never climb on top of, nor place heavy objects on
the unit.
..........................................................................................................
115b
• Install the circuit board only into the specified unit
(G-70 and future SRX-compatible arranger instru-
ments). Remove only the specified screws during
the installation.
..........................................................................................................
118a
• Should you remove screws, keep them in a safe
place out of children’s reach, so there is no chance
of them being swallowed accidentally.
..........................................................................................................
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The â—Ź symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
962b
* In the interest of product improvement, the specifications and/or contents of this package are subject to change
without prior notice.
3
IMPORTANT NOTES
When you purchase the SR-G01 expansion board from an
authorized Roland dealer, the included sounds and samples
are licensed, not sold, to you by Roland Corporation, for
commercial use in music production, public performance,
broadcast, etc.
You may use any of the included phrases and/or samples in
a commercial or non-commercial recording without paying
any additional license fees. However, you must strictly
adhere to the following crediting guidelines on any music
recording that utilize material from the SR-G01.
Reproduction or duplication of this collection or any of the
sound recording contained in the SR-G01, either as they exist
on this expansion board or by any means of reformatting,
mixing, filtering, re-synthesizing, processing or otherwise
editing for use in another product or for re-sale, is strictly
prohibited without the express written consent of Roland. All
unauthorized giving, trading, lending, renting, re-issue, re-
distribution or re-sale of the sounds included in the SR-G01
are expressly prohibited.
In Plain English: Be creative in your application of the
SR-G01 sounds, and keep this library for your use only. DO
NOT COPY IT.
Roland constantly monitors other Soundware releases to
check for copyright infringements, and will prosecute all
piracy and copyright violations to the fullest extent of the
law.
THIS LIBRARY IS GUARANTEED TO BE 100%
COPYRIGHT CLEAN.
291a
In addition to the items listed under “USING THE UNIT
SAFELY” on page 2, please read and observe the
following:
Handling CD-ROMs
801 * Avoid touching or scratching the shiny underside (encoded
surface) of the disc. Damaged or dirty CD-ROM discs may not
be read properly. Keep your discs clean using a commercially
available CD cleaner.
Handling the Board
901
To avoid the risk of damage to internal components that can
be caused by static electricity, please carefully observe the
following whenever you handle the board.
1 * Before you touch the board, always first grasp a metal object
(such as a water pipe), so you are sure that any static
electricity you might have been carrying has been discharged.
2 * When handling the board, grasp it only by its edges. Avoid
touching any of the electronic components or connectors.
5
* Save the bag in which the board was originally shipped, and put
the board back into it whenever you need to store or transport it.
Veuillez suivre attentivement les instructions suivantes
quand vous manipulez la carte afin d’éviter tout risque
d’endommagement des pièces internes par l’électricité
statique.
1 * Toujours toucher un objet métallique relié à la terre (comme
un tuyau par exemple) avant de manipuler la carte pour vous
décharger de l’électricité statique que vous auriez pu
accumuler.
2 * Lorsque vous manipulez la carte, la tenir par les côtés. Évitez
de toucher aux composants ou aux connecteurs.
5 * Conservez le sachet d’origine dans lequel était la carte lors de
l’envoi et remettez la carte dedans si vous devez la ranger ou la
transporter.
About the Included CD-ROM
The included CD-ROM features:
• The data that allow you to upgrade to version 2.0 of the
G-70’s operating system.
• 30 new Music Styles based on the sounds of the SR-G01
(SR-G01 Dedicated Styles).
• 68 new User Program registrations for the new Music
Styles.
• The owner’s manual for version 2 of the G-70’s operating
system.
• A document that explains how to upgrade the G-70 to
version 2.
* Take proper care of the supplied CD-ROM; it will not be
reissued.
* The system software on the included CD-ROM represents the
latest G-70 system version. For information regarding newer
versions than the ones on this disk, you should contact the
nearest Roland Service Center.


Product specificaties

Merk: Roland
Categorie: Niet gecategoriseerd
Model: SR-G01

Heb je hulp nodig?

Als je hulp nodig hebt met Roland SR-G01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Roland

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd