Roland MV8-OP1 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Roland MV8-OP1 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Using the MV8-OP1
Copyright © 2006 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any
form without the written permission of ROLAND CORPORATION.
Roland International Web Site: http://www.Roland.com
Contents
About the MV8-OP1 ................................................................. 2
Panel Descriptions .................................................................. 3
Installing the MV8-OP1............................................................ 4
Installation de la MV8-OP1
(French language for Canadian Safety Standard) ...................................... 6
Using the MV8-OP1.................................................................. 8
Outputting analog audio from analog multi output.................. 8
Inputting audio via a digital connection (coaxial/optical) ........ 8
Transferring digital audio via R-BUS ...................................... 9
Connections and settings for R-BUS devices ...................... 12
2MV-8800 Using the MV8-OP1
About the MV8-OP1
The MV8-OP1 AUDIO I/O EXPANSION (sold separately) is an expansion board that adds six analog
multi-outputs, digital inputs (coaxial type and optical type), and an R-BUS connector to the MV-8800.
Installing the MV8-OP1 adds the following functionality.
â—ŹYou can digitally connect a digital audio device (CD player, MD player, DAT recorder) and sample
without impairing the audio quality.
â—ŹYou can input digital audio of a variety of sampling frequencies.
* Since the MV8-OP1 contains a sampling rate converter, there is no limitation on the sampling frequencies that can
be input. All signals will be converted to 44.1 kHz.
â—ŹYou can connect devices that have an R-BUS connector, such as the Roland VS-2480CD or XV-5080,
for digital audio input/output via R-BUS (2-channel input / 8-channel output).
â—ŹYou can individually output the audio signals of the MV-8800 to its multi outputs. This is convenient
when you are using the MV-8800 with an external mixer. (Analog output and R-BUS output are all
available.)
â—ŹWhen used with the DIF-AT24 (sold separately), an additional MIDI IN and OUT (16 channels) is added.
* Don’t connect the R-BUS connector to an RMDB connector, SCSI connector, RS-232C connector, or parallel
connector. Doing so will cause malfunctions.
* Don’t connect or disconnect the R-BUS connector while the power is turned on. Doing so will cause malfunctions.
3
MV-8800 Using the MV8-OP1
Panel Descriptions
The illustration shows the MV-8800 rear panel when the separately sold MV8-OP1 option is installed.
The jacks shown in items 1–3 are available if the MV8-OP1 AUDIO I/O EXPANSION (separately sold) is installed.
You can make output settings from the INSTRUMENTS screen (Screen Guide; p. 114) and the PARTIAL EDIT screen
(Screen Guide; p. 125).
DIGITAL IN Connectors
These are digital audio input connectors. “A” is a coaxial type connector, and “B” is an optical type connector.
R-BUS Connector
This is a digital 2-channel input/8-channel output connector. You can also set the input select setting to receive audio
input from R-BUS channels 1 and 2, or use the R-BUS channels 1–8 to output the audio from the MULTI OUTPUT bus.
ANALOG MULTI OUTPUT Connectors
These jacks output the audio from the MULTI OUTPUT bus.


Product specificaties

Merk: Roland
Categorie: Niet gecategoriseerd
Model: MV8-OP1

Heb je hulp nodig?

Als je hulp nodig hebt met Roland MV8-OP1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Roland

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd