Roland KSCFP10 Handleiding

Roland Niet gecategoriseerd KSCFP10

Lees hieronder de 📖 handleiding in het Nederlandse voor Roland KSCFP10 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

KSCFP10

Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES.” After reading, keep the document(s) where it will be

available for immediate reference.

5Make sure that another person is on hand to help with the assembly and setup.

5Be very careful, when you assemble and move the piano, to make sure that you do not drop it on your hands

or feet.

5Prepare an area in which you can perform the assembly safely.

5Do not use a power tool (e.g., an electric screwdriver) to assemble the stand. You risk damaging or stripping

the screws.

5The KSCFP10 is designed specically to be used with the FP-10.

Parts Check

Before you begin assembling the stand, check that all the parts ere

supplied.

A B

ASide board (left) 1 pcs.

BSide board (right) 1 pcs.

CCenter board 1 pcs.

1Stabilizers (screw holes left) 2 pcs.

2Stabilizers (screw holes right) 2 pcs.

3Screws with pointed tip (4 x 14 mm) 12 pcs.

4Short screws (M5 x 12 mm) 6 pcs.

5Long screws (M5 x 20 mm) 4 pcs.

Assembly Procedure

* You will need a Phillips screwdriver.

* Fasten each screw tightly, then place the stand in a stable and

horizontal place.

1 Attaching the Stabilizers

Attach the stabilizers to the side boards, and use the screws with pointed

tip to fasten them.

Position the screw holes of the stabilizers on the same side as the side

board’s metal xtures.

2 Stand Assembly

Use the short screws to fasten the side boards and the center board.

* At rst, assemble the entire stand in a temporary fashion, without

really tightening the screws. Then, after checking the overall

alignment of the boards (and gently shifting certain parts where

necessary), go around and tightly fasten each of the screws.

Position the metal xtures of

the side boards inward.

Keyboard side

Rear

Position the metal

parts of the center

board so that they

face the rear.

3 Installing the Piano on the Stand

Place the piano unit on the stand, and use the long screws to fasten it

securely.

Keyboard side

When placing the

piano unit on the

stand, take care not to pinch

your ngers!

Completed Appearance

Owner’s Manual

Keyboard stand for FP-10 USING THE UNIT SAFELY

Used for instructions intended to alert the

user to the risk of injury or material

damage should the unit be used

improperly.

* Material damage refers to damage or

other adverse effects caused with

respect to the home and all its

furnishings, as well to domestic animals

or pets.

Used for instructions intended to alert the

user to the risk of death or severe injury

should the unit be used improperly.

The symbol alerts the user to things that must be

carried out. The specific thing that must be done is

indicated by the design contained within the circle. In the

case of the symbol at left, it means that the power-cord

plug must be unplugged from the outlet.

The symbol alerts the user to important instructions or

warnings.The specific meaning of the symbol is

determined by the design contained within the triangle. In

the case of the symbol at left, it is used for general

cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never be

carried out (are forbidden). The specific thing that must

not be done is indicated by the design contained within

the circle. In the case of the symbol at left, it means that

the unit must never be disassembled.

About WARNING and CAUTION Notices About the Symbols

ALWAYS OBSERVE THE FOLLOWING

IMPORTANT NOTES

WARNING

Do not disassemble or modify by

yourself

Do not carry out anything unless

you are instructed to do so in the

owner’s manual. Otherwise, you

risk causing malfunction.

Do not repair or replace parts by yourself

Refer all servicing to your retailer,

the nearest Roland Service Center,

or an authorized Roland distributor,

as listed on the “Information.”

Do not use or store in the following types

of locations

• Subject to temperature extremes

(e.g., direct sunlight in an

enclosed vehicle, near a heating

duct, on top of heat-generating

equipment); or are

• Damp (e.g., baths, washrooms,

on wet oors); or are

• Exposed to steam or smoke; or are

• Subject to salt exposure; or are

• Exposed to rain; or are

• Dusty or sandy; or are

• Subject to high levels of vibration and

shakiness; or are

• Placed in a poorly ventilated location.

Do not place in an unstable location

Otherwise, you risk injury as the

result of the unit toppling over or

dropping down.

Be cautious to protect children from

injury

Always make sure that an adult is

on hand to provide supervision

and guidance when using the

unit in places where children are

present, or when a child will be using the

unit.

Do not drop or subject to strong impact

Otherwise, you risk causing

damage or malfunction.

CAUTION

Use the stand only for the specied

products

This stand is designed specically

to be used with the Roland FP-10.

If used in combination with other

products, you risk sustaining

injuries as the result of the product dropping

down or toppling over due to a lack of

stability.

Evaluate safety issues before using

stands

Even if you observe the cautions

given in the owner’s manual,

certain types of handling may

allow this product to fall from the

stand, or cause the stand to overturn. Please

be mindful of any safety issues before using

this product.

Avoid climbing on top of the unit, or

placing heavy objects on it

Otherwise, you risk injury as the

result of the unit toppling over or

dropping down.

Cautions when moving this unit

If you need to move the

instrument, take note of the

precautions listed below. At least

two persons are required to safely

lift and move the unit. It should be handled

carefully, all the while keeping it level.

Make sure to have a rm grip, to protect

yourself from injury and the instrument from

damage.

• Check to make sure the screws securing

the unit to the stand have not become

loose. Fasten them again securely

whenever you notice any loosening.

• Disconnect the power cord.

• Disconnect all cords coming from external

devices.

• Remove the music rest.

Keep small items out of the reach of

children

To prevent accidental ingestion

of the parts listed below, always

keep them out of the reach of small

children.

• Included Parts

Screws

Stabilizers

Placement

• Do not allow lighting devices that normally

are used while their light source is very close

to the unit (such as a piano light), or powerful

spotlights to shine upon the same area of the

unit for extended periods of time. Excessive

heat can deform or discolor the unit.

• Do not paste stickers, decals, or the like to

this instrument. Peeling such matter o the

instrument may damage the exterior nish.

• Depending on the material and temperature

of the surface on which you place the unit, its

rubber feet may discolor or mar the surface.

Maintenance

• To clean the unit, use a dry, soft cloth; or

one that is slightly dampened. Try to wipe

the entire surface using an equal amount of

strength, moving the cloth along with the

grain of the wood. Rubbing too hard in the

same area can damage the nish.

• Never use benzine, thinners, alcohol or

solvents of any kind, to avoid the possibility of

discoloration and/or deformation.

• As with any wood-crafted product, some

expansion and contraction of the wood can

occur depending on the way the unit is used

and the environment in which it is used. Over

time, this can cause some of the screws to

start coming loose. To ensure safe, worry-free

use of the unit, you should periodically check

the tightness of the screws shown in the

illustration. If you nd any that are loose, use a

screwdriver to tighten them.

Additional Precautions

• The sound of keys being struck and vibrations

produced by playing an instrument can be

transmitted through a oor or wall to an

unexpected extent. Please take care not to

cause annoyance to others nearby.

• This document explains the specications of

the product at the time that the document

was issued. For the latest information, refer to

the Roland website.

* 5100061930- 01*

Product specificaties

Merk:	Roland
Categorie:	Niet gecategoriseerd
Model:	KSCFP10
Kleur van het product:	Zwart
Gebruikershandleiding:	Ja
Plaatsing:	Vloer
In hoogte verstelbaar:	Nee
Materiaal:	Hout
Bedoeld voor:	Toetsenbord
Inklapbaar:	Nee
Compatibele producten:	FP-10