Roland CY-18DR Handleiding

Roland Niet gecategoriseerd CY-18DR

Lees hieronder de 📖 handleiding in het Nederlandse voor Roland CY-18DR (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 88 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT
NOTES” (p. 4). After reading, keep the document(s) where it will be available for
immediate reference.
Copyright © 2016 ROLAND CORPORATION
Owner’s Manual
2
Making the Settings
Check the Included Items
After opening the package, check that all of the included items are
present. If anything is missing, contact your dealer.
CY-18DR
Wing nut
Felt washer
Stopper
Connection cable
Cable tie
Owner’s manual (this document)
CY-18DR Components
Bow
Edge
FUNC button (*1)
DIGITAL TRIGGER OUT connector
(*1) This button will be used in the event of a future upgrade.
* It is not normally used.
Mounting on the Stand
1. Use a commercially available drum key to tighten the
stopper bolt.
The stopper keeps the V-Cymbal from turning, preventing the
tangling of cables on the stand.
Stopper
Attach the stopper
so that the bolt is on
the right-hand side,
from the performer’s
perspective.
Bolt
Tighten the bolt
with a commercially
available drum key.
2. Attach the V-Cymbal, while positioning it so the Roland
logo is located on the side opposite the performer.
Wing nut
Felt washer
Position the Roland logo
on the opposite side of the
playing area
3. Tighten the included felt washer and the wing nut to
obtain the desired movement.
* Use the included felt washer and wing nut.
* Double sounding may occur if the wing nut is loose.
4. Insert the plug of the connection cable into the CY-18DR’s
DIGITAL TRIGGER OUT connector.
Connection cable
Protector
Use the protector to lock the
connection.
5. Secure the cables in place with the cable tie.
Leave some slack in the cables to ensure they are not pulled by the
movement of the V-Cymbal pads.
Be sure to make this
small plastic hook
visible from you.
Wind a cable tie around a cable.
Wind a cable tie around the pipe and
tighten it in order to not to slip.
Insert the small
plastic hook to a
hole to secure the
cable to the cymbal arm.
Secure the cable in place
with the cable tie
k in the cable
* Take care to ensure that the cables do not touch the V-Cymbal
pads and/ or the stand. A cable touching a V-Cymbal pad or a
stand may cause double sounding or other incorrect operation.
3
Main Specications
Roland CY-18DR: V-Cymbal Digital Ride
Size 18 inches
Triggers 3 (Bow/Bell/Edge)
Connector DIGITAL TRIGGER OUT connector
(compatible with Roland drum sound module equipped with DIGITAL TRIGGER IN port)
Power Supply DIGITAL TRIGGER bus power (DC 5 V)
Current draw 90 mA
Dimensions 470 (W) x 470 (D) x 55 (H) mm
18-9/16 (W) x 18-9/16 (D) x 2-3/16 (H) inches
Weight 2.1 kg / 4 lbs 11 oz
Accessories Owner’s manual, Wing nut, Felt washer, Stopper, Connection cable, Cable tie
Options
(sold separately)
Cymbal mount (MDY series)
Cymbal parts set (CYM-10)
* This document explains the specications of the product at the time that the document was issued. For the latest information, refer to the Roland
website.
Connecting to the Drum Sound Module
Use a Roland drum sound module that supports digital
connections.
1. Insert the plug of the connection cable into the drum
sound module’s DIGITAL TRIGGER IN port.
2. On the drum sound module, make settings for using the
CY-18DR.
* For details, refer to the owner’s manual of your drum sound
module.
Recommended settings for the trigger parameters
The rst time you connect the CY-18DR to your drum sound
module, the recommended values are assigned to the trigger
parameters.
You may need to adjust the trigger parameters depending on how
you’ve mounted the CY-18DR and the location at which you’ve
installed it.
For details on editing refer to the owner’s manual of your drum
sound module.
Playing Method
The response to various playing methods depends on the drum
sound module.
For details, refer to the owner’s manual of your drum sound module.
NOTE
5Use only wooden or plastic sticks. Using a carbon or metal
stick may cause the sensor to malfunction.
5Use nylon brushes. Using metal brushes may cause the
sensor to malfunction, and may scratch the pad.
Playing method Explanation
Bow shot Nuance changes depending
on the strike location This is the most common playing
method, playing the middle area of the
cymbal. It corresponds to the sound
of the “head-side” of the connected
trigger input.
Edge shot
Edge sensor
This playing method involves striking
the edge with the shoulder of the stick.
When played as shown in the gure,
the rim sound of the connected input
is triggered.
Bell shot
This is the technique of striking the
bell.
Striking the bell area will produce the
rim sound of the connected trigger
input.
Strike using the shoulder of the stick.
Choke play
Edge sensor
Sensor
If you use your hand to choke (grasp)
the edge sensor after striking the
cymbal, the sound stops.
In addition, placing your hand on the
sensor will also stop the sound (mute).
If you strike the cymbal in a choked or
mute state, it rings a shorter time.

Product specificaties

Merk: Roland
Categorie: Niet gecategoriseerd
Model: CY-18DR

Heb je hulp nodig?

Als je hulp nodig hebt met Roland CY-18DR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Roland

Roland

Roland RCP800 Handleiding

9 April 2024
Roland

Roland HP605 Handleiding

9 April 2024
Roland

Roland FD-01A Handleiding

9 April 2024
Roland

Roland MDS-4KVX Handleiding

9 April 2024
Roland

Roland CY-12C Handleiding

9 April 2024
Roland

Roland JUNO-60 Handleiding

9 April 2024
Roland

Roland TB-303 Handleiding

9 April 2024
Roland

Roland VP-42H Handleiding

9 April 2024
Roland

Roland PD-100 Handleiding

9 April 2024
Roland

Roland JX-3P Handleiding

9 April 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024