Rocstor Y10E031-B1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Rocstor Y10E031-B1 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
®
2U 19in Steel Vertical Wall Mount Rack Bracket - Black
User Manual
Y10E031-B1
© 2022 Rocstor is registered trade mark of Rocstorage, Inc. Any unauthorized copying, duplicating, or other reproduction of the contents hereof
is prohibited without written consent from Rocstor. All rights reserved. Other trademarks are property of their respective owners.
Introduction & Installation
Page 1
Wall Mounting Hole
Wall Mounting Hole
1- Installation of M6 Cage Nuts provides an attachment point into the square opening to the M6 Mounting Screws. Note: Check
your user manual to see how many cage nuts will be needed and where they need to be installed.
A- Insert one of the anges of the cage nut through the square opening from the inside of the mounting rails and press it against
the side of the square opening.
B- You may have to apply some slight compression to the sides so the remaining ange will be able to t through the square
opening. If the cage nut has been installed correctly, then both anges will jut out through the square opening and will be
noticeable on the outer surface of the mounting rail. Repeat steps 1a and 1b until all required cage nuts are installed.
2- Once the required cage nuts have been installed, you can use the included M6 Mounting Screws and M6 Washers to secure your
equipment into the installed M6 Cage Nuts.
Measurements
Page 2
152,4
514
406
32450
465
28
152,4
116,8
44,45
Package Content:
• M6 Cage Nut x 12
• M6 Plastic Washers x 12
• M6 Phillips Head Screw x 12
• Expansion Bolt x4
Units Dimension (Millimeter):


Product specificaties

Merk: Rocstor
Categorie: Niet gecategoriseerd
Model: Y10E031-B1
Kleur van het product: Zwart
Gewicht: 2000 g
Breedte: 514 mm
Diepte: 152.4 mm
Hoogte: 116.8 mm
Gewicht verpakking: 2100 g
Breedte verpakking: 540 mm
Diepte verpakking: 145 mm
Hoogte verpakking: 170 mm
Soort: Montagebeugel
Materiaal behuizing: Staal
Maximale gewichtscapaciteit: 56.7 kg
Certificering: EIA/ECA-310-E
Duurzaamheidscertificaten: RoHS
Rackcapaciteit: 2U

Heb je hulp nodig?

Als je hulp nodig hebt met Rocstor Y10E031-B1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Rocstor

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd