Rockford Fosgate 3SIXTY.3 Handleiding

Rockford Fosgate Audio/video-converter 3SIXTY.3

Lees hieronder de 📖 handleiding in het Nederlandse voor Rockford Fosgate 3SIXTY.3 (28 pagina's) in de categorie Audio/video-converter. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
Serial Number: Date of Purchase:
Installation & Operation
INTERACTIVE
SIGNAL PROCESSOR
3SIXTY.3
Quick Setup Guide
1. Install 3Sixty.3 software
2. Open 3Sixty.3 Software (See pg 9)
3. Connect 3Sixty.3 USB cable to 3Sixty.3 and then to the PC. (See pg 9)
4. Open the 3Sixty.3 user interface (UI). A pop up window will appear telling you the unit is not congured.
Click “OK” (See pg 10)
5. If the conguration pop up window above does not appear telling you that the unit is not congured,
open the “Device” tab and select “Configuration” in the top left corner. (See pg 9)
6. When the input conguration page appears, select your source interface type and label your input
channels. Click “Next” (See pg 15)
7. When the output conguration page appears, label your output channels if one or more channels is not
being used select “Not Connected”. Click “Next” (See pg 15)
8. When the input channel summing page appears, select the output channel from the vehicle illustration,
then select the input(s) you would like to use/sum to create that output channel. After assigning ALL
output channels there inputs, Click “Next” (See pg 15)
9. When the assign source presets page appears, select the preset(s) you would like to assign to each
source. Click “Next” (See pg 16)
10. When the input level setup prompt appears, insert the 3Sixty.3 setup disk and play track #1 at max
volume and follow the on screen directions. Click “Next”(Outputs will be muted) (See pg 16)
11. When the adjust source level appears, reduce the volume of the source until all the level meters are
green. Click “Next” (The 3Sixty.3 is not looking for a hard clipped signal you would typically see when
level setting an amplier) (Make a note of the MAXIMUM volume level on the source unit achieved
keeping the level meters green for future steps) (See pg16)
12. When the input attenuator controls appears, select “Auto Range” to automatically match the input
voltage, to the input voltage range of the DSP. (See pg 16)
13. a) If using a low level input, the mute warning page will appear prompting you to reduce your
volume. Click “Finish” and go to Step #15 (See pg 17)
b) If using a high level input, the input denormalization setup prompt appears, use the 3Sixty.3 setup
disk and play track #2 at half of the noted source volume in step #11. Click “Next” (See pg 17)
14. During the input normalization page, select “Auto Normalize”. This may take up to 5 min. Once
completed, Click “Next” (See pg 17)
15. The mute warning page will appear prompting you to reduce your volume, and Click “Finish”. Device
setup is now complete. Please proceed with system tuning.
16. Select the crossover type, class, slope, and frequencies for each channel. (See pg 13 & 21)
17. Level set the ampliers to the main source unit, then adjust each additional source level. (See pg 14
& 22)
18. Select the time delay for each channel. (See pg 14 & 28)
19. Adjust the EQ for each channel, for each source or preset. (See pg 14 & 28)
20. After adjusting the EQ, level set the ampliers to the main source unit, then adjust each additional
source level. (See pg 22)
21. Under the ”File” tab select “Save File”. (See pg 10)
2
Dear Customer,
Congratulations on your purchase of the world’s finest brand of car audio signal
processors. At Rockford Fosgate we are fanatics about musical reproduction at
its best, and we are pleased you chose our product. Through years of engineering
expertise, hand craftsmanship and critical testing procedures, we have created a
wide range of products that reproduce music with all the clarity and richness you
deserve.
For maximum performance we recommend you have your new Rockford Fosgate
product installed by an Authorized Rockford Fosgate Dealer, as we provide special-
ized training through Rockford Technical Training Institute (RTTI). Please read
your warranty and retain your receipt and original carton for possible future use.
Great product and competent installations are only a piece of the puzzle when
it comes to your system. Make sure that your installer is using 100% authentic
installation accessories from Rockford Fosgate in your installation. Rockford Fos-
gate has everything from RCA cables and speaker wire to power wire and battery
connectors. Insist on it! After all, your new system deserves nothing but the best.
To add the nishing touch to your new Rockford Fosgate image order your Rock-
ford accessories, which include everything from T-shirts to jackets.
Visit our web site for the latest information on all Rockford products;
www.rockfordfosgate.com
or, in the U.S. call 1-800-669-9899 or FAX 1-800-398-3985. For all other countries, call
+001-480-967-3565 or FAX +001-480-966-3983.
Table of Contents
If, after reading your manual, you still have questions regarding this prod-
uct, we recommend that you see your Rockford Fosgate dealer. If you need
further assistance, you can call us direct at . Be sure to 1-800-669-9899
have your serial number, model number and date of purchase available
when you call.
Safety
This symbol with “WARNING” is intended
to alert the user to the presence of important
instructions. Failure to heed the instructions
will result in severe injury or death.
This symbol with “CAUTION” is intended to
alert the user to the presence of important
instructions. Failure to heed the instructions
can result in injury or unit damage.
•To prevent injury and damage to the unit, please read and follow the
instructions in this manual. We want you to enjoy this system, not get
a headache.
•If you feel unsure about installing this system yourself, have it installed
by a qualied Rockford Fosgate technician.
•Before installation, disconnect the battery negative (-) terminal to
prevent damage to the unit, re and/or possible injury.
Contents of Carton
•3Sixty.3 Interactive Signal Processor
•Bluetooth Dongle
•Remote Level(s) Controller
•Remote Level Control Cable (20ft)
•Power Connector (4 pin)
•High Level Input Connection (16 pin)
• Installation & Operation Manual
•Multimedia Setup Disc (CD)
•USB cable (20ft)
Introduction
Š2011 Rockford Corporation. All Rights Reversed. ROCKFORD FOSGATE, PUNCH, and associated logos where applicable are registered trademarks of Rockford
Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Specications subject to change without notice.
PRACTICE SAFE SOUND
Continuous exposure to sound pressure levels over 100dB may cause
permanent hearing loss. High powered auto sound systems may
produce sound pressure levels well over 130dB. Use common sense
and practice safe sound.
2 Introduction
3 Specications
4-5 Design Features
6-9 Installation
Installation Considerations
Input Connections
Remote Connections
Output Connections / Software Installation
9-11 Initial Setup
File / Device Tabs
Presets / Preferences
12-14 EQ Setup
EQ Controls
EQ Controls
15-17 High Level Sample System
18-20 Low Level Sample System
21-23 EQ Sample System
24 Final Setup
25 Troubleshooting
26 Troubleshooting Noise
27 Limited Warranty Information
28 Quick Setup Guide
3
Operating Voltage 9 - 16 VDC
Recommended Fuse 2 A
Max REM Out Current 1 A
Input Impedance (Low Level) 10K Ohm
High Level Turn On DC Voltage 4 - 16 VDC
Input Sensitivity
Low Level (RCA) 0.1V - 2V
High Level 0.1V - 28V
AUX 0.1 - 1V
Frequency Response 20 - 20K +/- 0.5dB
Max Output Voltage 8 VAC @ 0.1% THD
THD+N <0.01 @ 1KHz
Signal to Noise Ratio (RCA) >105 dBA (A weighted)
Signal to Noise Ratio (Optical) >110 dBA (A weighted)
Signal to Noise Ratio (AUX) >105 dBA (A weighted)
Common Mode Rejection Ratio >70
Channel Separation >73dB @ 1KHz
Specications
CEA 2006
Measurements on Rockford Fosgate processors conform to CEA-2006 industry standards.
Channel Front Front2 Rear Sub
Interval (oct) Adjustable
Bands 31 31 31 31
Delay 0 - 10 msec
Q Range 0.1 - 6.0
Frequency 20 -20KHz
Presets Assignable 4
Crossover Setting AP/HP/LP/BP/Shelf
Slope (dB/oct) 12 / 24 / 36 / 48
Range (Hz) 20 - 20kHz
Class Linkwitz / Bessel / Butterworth / Chebychev
Length 5.0” 12.75 cm
Width 9.3” 23.6 cm
Height 1.7” 4.3 cm
Technical Specications
Dimensions
Crossover
Equalizer
9.3"
(23.6)
5.0"
(12.75)
1.7"
(4.3)
RESET
WIRELESS
USB RFLINK ACC OPT IN
FRONT FRONT2 REAR SUB
OUTPUTS
UNBALANCED
BALANCED
L
R
1
3
2 4
5
6
7
8

Product specificaties

Merk: Rockford Fosgate
Categorie: Audio/video-converter
Model: 3SIXTY.3

Heb je hulp nodig?

Als je hulp nodig hebt met Rockford Fosgate 3SIXTY.3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Audio/video-converter Rockford Fosgate

Rockford Fosgate

Rockford Fosgate RF-HLC4 Handleiding

22 November 2023
Rockford Fosgate

Rockford Fosgate 3SIXTY.3 Handleiding

22 November 2023

Handleiding Audio/video-converter

Nieuwste handleidingen voor Audio/video-converter

Audison

Audison Bit Ten D Handleiding

21 April 2024
Spatz

Spatz OPTO-RCA Handleiding

20 April 2024
Spatz

Spatz RCA-OPTO Handleiding

20 April 2024
PTN-electronics

PTN-electronics CHH2 Handleiding

9 April 2024
Adder

Adder -DVA Handleiding

8 April 2024
GEM

GEM CX1003 Handleiding

29 Maart 2024
Audiotec Fischer

Audiotec Fischer Helix DSP.3S Handleiding

25 Maart 2024
Audiotec Fischer

Audiotec Fischer DSP MINI Handleiding

25 Maart 2024
Smart-AVI

Smart-AVI CVH-01S Handleiding

13 Maart 2024
SIIG

SIIG CE-CV0011-S1 Handleiding

13 Maart 2024