Robert Abbey 2506X Handleiding

Bekijk gratis de handleiding van Robert Abbey 2506X (1 pagina’s), behorend tot de categorie Lamp. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.4 sterren uit 5 reviews. Heb je een vraag over Robert Abbey 2506X of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ASSEMBLY INSTRUCTIONS FOR YOUR

ANNIKA ACCENT LAMP

2504

ASSEMBLY INSTRUCTIONS:

NOTE: Do not connect electricity until lamp is fully assembled.

1. Remove lamp parts from packaging. Do not throw away any parts.

2. Place lamp base on level surface.

3. Remove nial (A) from harp (C). Squeeze harp (C) inward and place into the opening of saddle (D).

4. Place shade (B) onto harp (C). Thread nial (A) back onto harp (C) to secure shade (B) to lamp.

5. Install one (1) 60W MAX. B10.5, candelabra base bulb into socket.

6. Remove protective plastic (G) from polarized plug (F).

7. Insert polarized plug (F) into wall outlet.

8. Control power to the xture by using line switch (E).

* To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners.*

IMPORTANT SAFETY INSTRUCTIONS:

* This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This

plug will t in a polarized outlet only one way. If it does not t fully in the outlet, reverse the plug. If it still does not t,

contact a qualied electrician. Do NOT alter the plug.

* Do not use with an extension cord unless the plug from the lamp can be fully inserted into the extension cord receptical.

* Switch power off and remove plug from the wall outlet before replacing the bulb.

(A)

(B)

(C)

(D)

(E)

(F)

(G)

Product specificaties