Rinnai Tankless Rack System TRW03IN Handleiding
Rinnai
Ketel & boiler
Tankless Rack System TRW03IN
Bekijk gratis de handleiding van Rinnai Tankless Rack System TRW03IN (20 pagina’s), behorend tot de categorie Ketel & boiler. Deze gids werd als nuttig beoordeeld door 50 mensen en kreeg gemiddeld 4.3 sterren uit 25.5 reviews. Heb je een vraag over Rinnai Tankless Rack System TRW03IN of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/20
1 Rinnai Rack Installation
Tankless Rack System (TRS) InstallaƟon Manual
Additional information can be obtained from the appliance manual.
— Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
— WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instrucƟons.
• If you cannot reach your gas supplier, call the fire department.
— InstallaƟon and service must be performed by a licensed professional.
If the informaƟon in these instrucƟons is not followed exactly, a fire or explosion
may result causing property damage, personal injury or death.
WARNING
Free Standing Rack
(6 water heaters)
Wall Mounted Rack
(4 water heaters)
2 Rinnai Rack Installation
Description ............................................................ 3
Venting Options ..................................................... 3
TRS Part Nos. and Main Components .................. 4
Specifications ........................................................ 5
Clearances ............................................................ 7
Hoisting ................................................................. 8
Mounting Wall Racks ............................................ 9
Securing Free Standing Racks ............................. 9
Relief Valve Piping .............................................. 10
Piping for Multiple Racks .................................... 10
Parallel Piping Drawing ....................................... 11
End caps / Connections ...................................... 12
Replacement Parts .............................................. 12
Condensate Drain ............................................... 13
Checklist for Plumbing ......................................... 13
Installation of Gas Supply .................................... 14
Connecting Electricity .......................................... 14
MSB Installation................................................... 15
Final Checklist ..................................................... 17
Extended Limited Labor Warranty ....................... 18
Safety Symbols
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in minor or
moderate injury. It may also be used to alert against unsafe practices.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and
others.
DANGER
CAUTION
WARNING
A licensed professional must install the common venng.
The installer should have skills such as
• connecng gas lines, water lines, valves, and electricity
• knowledge of applicable naonal, state, and local codes
If you lack these skills, contact a licensed professional.
InstallaƟon
Table of Contents
3 Rinnai Rack Installation
DescripƟon
Rinnai Tankless Rack Systems (TRS) include wall mounted and free standing configuraons. The wall mounted
rack systems are available for 2, 3, or 4 water heaters. Free standing rack systems are available for 2, 3, 4, 5, or 6
water heaters.
The TRS can be ordered with Rinnai’s Common Venng System, which consists of the CVent exhaust venng and
PVC intake venng Up to eight tankless units share the same CVent system.
The Rinnai TRS features design details that make installaon straigh orward. Gas and water manifolds are
properly sized, and condensate drainage mechanisms and electronic controls for mulple units are included.
The racks are constructed of powder‐coated aluminum, to stand up to the most demanding commercial
environments, while minimizing weight.
The TRS is designed to be used with Rinnai tankless water heaters only. Do not mount non‐Rinnai water heaters
on the TRS.
VenƟng OpƟons
Venng Opons Exhaust Vent Material
Intake Vent
Material Diameter
Max.
Units Max. Vent Length
Common Venng System PPtl (CVent) PVC 8" 8 100' (with 7 units)
Concentric PPs PVC 5" 1 41'
Dual Pipe* PPs PPs or PVC 3" 1 39'
* This venng is provided by Centrotherm through their own distribuon network
• Venng components are packaged together with the pre‐assembled Rack, but not assembled. Assembly of
the vent system is to be done by the contractor in the field.
Product specificaties
| Merk: | Rinnai |
| Categorie: | Ketel & boiler |
| Model: | Tankless Rack System TRW03IN |
Heb je hulp nodig?
Als je hulp nodig hebt met Rinnai Tankless Rack System TRW03IN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Ketel & boiler Rinnai
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025
21 November 2024
21 November 2024
21 November 2024
20 November 2024
31 Maart 2024
31 Maart 2024
Handleiding Ketel & boiler
- Hotpoint
- Guzzanti
- Noveen
- De Dietrich
- Fakir
- Duwaco
- ENEFT
- Wijas
- Fagor
- Concept
- Noritz
- Thermoflow
- IStore
- Junkers
- Hydrotherm
Nieuwste handleidingen voor Ketel & boiler
17 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
11 Juni 2025
10 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025