Rinnai RSE2S50BN Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Rinnai RSE2S50BN (48 pagina's) in de categorie Ketel & boiler. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/48
2
SE Series Infrared Gas Heater Installation and Operation Manual
NOTICE:
Rinnai reserves the right to make changes to equipment and specifications without
obligation or notification.
This publication, or parts thereof, may not be reproduced in any form, without prior written
consent from Rinnai. Unauthorized use or distribution of this publication is strictly prohibited.
Improper installation, adjustment, alteration, service or
maintenance can cause property damage, injury or death.
Read the installation and operating and maintenance instruc-
tions thoroughly before installing or servicing this equipment.
SAFETY ALERT:
This heater must be installed and serviced only by a trained gas service technician. Failure to
comply could result in personal injury, death, fire and/or property damage.
Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other gas fired appliance.
Indoor Applications The heater cannot be used indoors in a residence: .
IF YOU SMELL GAS:
Extinguish any open flame
Do not attempt to light this or any other appliance
Don t touch any electrical switch, or telephone
Immediately leave the area and call your gas supplier from a neighbor s phone
Follow any and all instruction from your gas supplier
If your gas supplier is not available, call the fire department
WARNING
FIELD CONVERTIBILITY:
This appliance is field convertible to
LP gas (except RSE2S50BN NG only).
Only use kit available from Rinnai.
Follow kit instructions and all local and
national codes.
INSTALLER: PRESENT THIS MANUAL
TO THE END USER.
Keep this manual in a secure place.
Record for future reference:
Model #:
Serial #:
(located on heater rating label)
Approval: Patio Heater for Outdoor Commercial / Residential Application
And / or: Gas-Fired High Intensity Infrared Heater for Commercial /Industrial
Non-Residential Indoor Spaces
All models constructed with Marine Grade Stainless Steel Cabinet
* Two-stage Model SE Series is natural gas only
3 SE Series Infrared Gas Heater Installation and Operation Manual
TABLE OF CONTENTS
TOPIC PAGE NUMBER
IMPORTANT INFORMATION READ FIRST-
IMPORTANT WARNINGS ........................... 4
HEATER EXPANSION ................................ 5
GAS CONNECTION .................................... 5
VENTING .............................................. 5, 13
SMOKE DISCOLORATION’ & ...................5
OUTDOOR DEFINITION .....................6, 16
MOUNTING CLEARANCES:
OUTDOOR ............................................ 7
INDOOR.............................................. 10
DIMENSIONS & CONFIGURATION .......... 11
MOUNTING KIT OPTIONS ................. 11 - 15
1. APPLICATION ................................................ 16
OUTDOOR / PATIO .................................... 16
INDOOR INSTALLATION ........................... 16
2. AIRCRAFT HANGARS .................................... 17
3. GARAGES & PARKING STRUCTURES .......... 17
4. OTHER THAN SPACE HEATING .................... 17
5. PRE-INSTALLATION SURVEY ....................... 17
6. INSTALLATION REQUIREMENTS .................. 18
6.1 MOUNTING CLEARANCES ..................... 18
6.2 HEATER MOUNTING .............................. 18
7. GAS SUPPLY PIPING ..................................... 19
7.1 GAS PRESSURE ..................................... 19
Patio Heater for Outdoor Commercial/Residential Application
and Gas-Fired Luminous (High Intensity) Infrared Heater
for Commercial / Industrial Non-Residential Indoor Spaces
This heater model is approved to two different heater standards:
A Patio Heaterfor Outdoor Use in Residential and Commercial/Industrial Applications
And as a Gas-Fired High Intensity Infrared Heaterfor Indoor Spaces of Commercial/Industrial Applications.
The heater cannot be used indoors in a residence.
TOPIC PAGE NUMBER
8. ELECTRICAL - BASIC REQUIREMENTS ……..19
9. LAYOUT, COMFORT & CONTROL ................ 20
10. INSTALLATION PROCEDURES .................... 21
11. LIGHTING INSTRUCTIONS ........................... 22
11.1 SHUT DOWN INSTRUCTIONS ............. 22
12. HEATER FINISH & APPEARANCE ................ 22
13. SERVICING GUIDE ....................................... 23
14. VENTILATION FOR INDOOR APP’S ............. 24
15. REMOTE CONTROL OPTIONS ..................... 25
Remote Control Quick Setup ............... 26 30-
16. 60 SEQUENCE OF OPERATION-FENWAL 35-
DSI ................................................................ 31
17. SPARK IGNITION CIRCUIT .......................... 32
18-A WIRING DIAGRAM - SINGLE-STAGE ......... 33
18-B WIRING DIAGRAM - -STAGE TWO ............. 34
18-C WIRING - 2-STAGE SWITCH CONTROL .... 35
19. TROUBLESHOOTING GUIDE ....................... 36
20. COMMISSIONING REPORT .......................... 38
21. HIGH ALTITUDE DERATION ........................ 40
22. ACCESSORIES: Control & Mounting .............. 41
23. REPLACEMENT PARTS LIST.......... ............. .43
Stainless Steel Enclosure Components ........... 44
IMPORTANT Installer: Present this manual to the end user. Acquaint the
end user with Important Information: Cover & pages 4 to 7.
END USER: In particular you must be aware of Clearances to Combustible re-
quirements and the limitations of stacking or placing material near the heaters.
Inform your safety personnel and staff of this information.


Product specificaties

Merk: Rinnai
Categorie: Ketel & boiler
Model: RSE2S50BN

Heb je hulp nodig?

Als je hulp nodig hebt met Rinnai RSE2S50BN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Ketel & boiler Rinnai

Handleiding Ketel & boiler

Nieuwste handleidingen voor Ketel & boiler