RIDGID RST100 Handleiding
RIDGID
Niet gecategoriseerd
RST100
Bekijk gratis de handleiding van RIDGID RST100 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.9 sterren uit 3.5 reviews. Heb je een vraag over RIDGID RST100 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
• Generator OK with continuous
output > 4,000 W
• Extension cord: #12 AWG or
larger; 25’ (8m) or shorter
120VAC, 20A
outlet, 30A
breaker
recommended
Connect to Input Power
* TIG Torch sold separately
4. 6.
Initiate the arc with a scratch or lift technique
when in contact with the metal
7.
Adjust amperage per
material thickness
Connect TIG torch lead to
gas (100% Argon)
5.
Connect TIG torch and
ground clamp
3.
ELECTRODE IS ALWAYS ELECTRICALLY HOT
WHILE IN TIG MODE
TIG TROUBLESHOOTING TIPS
Verify machine is plugged in and
on. See manual.
Both LED lights o
Duty-cycle exceeded or
insucient air flow. Allow
machine to cool. Ensure vents
are clear of obstacles. See
manual.
Both LED lights on
• Usually due to low input power.
• Welder should be only thing plugged into circuit.
• Avoid using extension cords. If one must be used, it must be #12
AWG or larger; 25’ (8m) or shorter.
• Generators must be 4,000 W continuous output and not have a
low-idle function (or have it disabled).
Low weld output or poor fusion
Welder should be the only thing plugged into the circuit.
Frequently tripping circuit breaker or exceeding duty-cycle
Connect ground clamp to clean, bare
metal. No rust, paint or other coatings.
Attach the ground clamp directly to the
workpiece if you are experiencing issues.
Workpiece grounding
• Not recommended for this machine.
• Output is DC only which is not recommended for
TIG welding aluminum.
Aluminum welding
Read user manual
Select process
2.
1.
DC
ONLY
TIG Torch
Ground
Clamp
TIG QUICK START GUIDE
STICK PRO 100 WELDER (NOT RECOMMENDED FOR ALUMINUM)
RIDGID.COM • 1-800-4-RIDGID
RIDGID is a registered trademark of RIDGID Inc. and used under license
ENGLISH
STICK TROUBLESHOOTING TIPS
• Generator OK with continuous
output > 4,000 W
• Extension cord: #12 AWG or
larger; 25’ (8m) or shorter
120VAC, 20A
outlet, 30A
breaker
recommended
*Performance may vary by brand
Connect to Input Power
Recommended electrodes
4. 6.
Adjust amperage per
settings chart on the
welder
5.
Electrode
Diameter
5/64” 3/32” 1/8”
E6010
X
E6011
E6013
E7014
E7018
X
E308L
Ni55
Connect electrode
holder and ground
clamp according to
desired polarity
3.
Usually
DCEP -
Electrode
Positive
Verify machine is plugged in and
on. See manual.
Both LED lights o
Duty-cycle exceeded or
insucient air flow. Allow
machine to cool. Ensure vents
are clear of obstacles. See
manual.
Both LED lights on
• Usually due to low input power.
• Welder should be only thing plugged into circuit.
• Avoid using extension cords. If one must be used, it must be #12
AWG or larger; 25’ (8m) or shorter.
• Generators must be 4,000 W continuous output and not have a
low-idle function (or have it disabled).
Low weld output or poor fusion
Use 1/8” diameter electrodes or smaller. Some 1/8” may draw
oo much amperage.
Trying to weld single pass on material larger than ¼” thick is
not possible with this machine. Multi-pass recommended for
thicker materials.
Welder should be the only thing plugged into the circuit.
Frequently tripping circuit breaker or exceeding duty-cycle
Connect ground clamp to clean, bare
metal. No rust, paint or other coatings.
Attach the ground clamp directly to the
workpiece if you are experiencing issues.
Workpiece grounding
• Not recommended for this machine.
• Requires more amperage on Stick than this machine is designed to
output.
Read user manual
Select process
2.
1.
Aluminum welding
Electrode Holder
Ground
Clamp
STICK QUICK START GUIDE
STICK PRO 100 WELDER (NOT RECOMMENDED FOR ALUMINUM)
RIDGID.COM • 1-800-4-RIDGID
RIDGID is a registered trademark of RIDGID Inc. and used under license
ENGLISH
Product specificaties
| Merk: | RIDGID |
| Categorie: | Niet gecategoriseerd |
| Model: | RST100 |
Heb je hulp nodig?
Als je hulp nodig hebt met RIDGID RST100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd RIDGID
17 Juni 2025
16 Juni 2025
18 Augustus 2024
5 Maart 2024
5 Maart 2024
5 Maart 2024
27 Februari 2024
26 Februari 2024
26 Februari 2024
26 Februari 2024
Handleiding Niet gecategoriseerd
- Elvid
- Caroline
- Vroomshoop
- Autodesk
- Finnlo
- Janitza
- Leatt
- Goobay
- DataVideo
- JOBY
- Callpod
- IFootage
- Metronic
- EnruigeOK
- Cardiostrong
Nieuwste handleidingen voor Niet gecategoriseerd
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025